Acura CSX. Manual — part 313
01
02
03
04
SNR9AA1E10410434065KBAT10
Special Tools Required
14-325
Idler Gear/Idler Gear Shaft Replacement
07749-0010000
07746-0010100
A
B
07749-0010000
07746-0010100
A
B
• Driver 07749-0010000
• Attachment, 32 x 35 mm 07746-0010100
1. Remove the snap ring from the idler gear/idler
shaft assembly. Do not distort the snap ring.
2. Check the snap ring for wear and damage. Replace
it if it is worn, distorted, or damaged.
3. Remove the idler gear shaft (A) from the idler gear
(B) using the driver, the 32 x 35 mm attachment,
and a press.
4. Replace the idler gear and/or the idler gear shaft,
and attach the idler gear shaft to the idler gear.
5. Install the idler gear shaft (A) in the idler gear (B)
using the driver, the 32 x 35 mm attachment, and a
press.
6. Install the snap ring.
08/08/21 14:51:26 61SNR030_140_0327
01
02
03
04
SNR9AA1E10411310041LCAT00
Special Tools Required
14-326
Shafts and Clutches
Clutch Disassembly
B
A
C
E
D
B
A
C
F
E
D
B
A
C
D
F
E
Clutch spring compressor set 07LAE-PX40000
1. Remove the snap ring using a screwdriver.
2. Remove the clutch end-plate (A), the clutch discs
(B) (4), the clutch wave-plates (C) (4), and the waved
spring (D) from the 1st clutch drum (E).
3. Remove the clutch end-plate (A), the clutch discs
(B) (4), the clutch wave-plates (C) (3), the clutch flat-
plate (D), and the waved spring (E) from the 2nd
clutch drum (F).
4. Make a reference mark on the clutch flat-plate.
5. Remove the clutch end-plate (A), the clutch discs
(B) (4), the clutch wave-plates (C) (3), the clutch flat-
plate (D), and the waved spring (E) from the 3rd
clutch drum (F).
6. Make a reference mark on the clutch flat-plate.
08/08/21 14:51:27 61SNR030_140_0328
01
02
*01
04
14-327
E
A
B
C
D
A
B
E
C
D
07LAE-PX40000
A
B
7. Remove the clutch end-plate (A), the clutch discs
(B) (3), the clutch wave-plates (C) (3), and the waved
spring (D) from the 4th clutch drum (E).
8. Remove the clutch end-plate (A), the clutch discs
(B) (3), the clutch wave-plates (C) (3), and the waved
spring (D) from the 5th clutch drum (E).
9. Install the clutch spring compressor set.
10. Be sure the clutch spring compressor set (A) is
adjusted to have full contact with the spring
retainer (B) on the 4th and 5th clutches.
08/08/21 14:51:28 61SNR030_140_0329
05
06
07
08
14-328
Shafts and Clutches
A
B
C
11. Set the clutch spring compressor set (A) on the
spring retainer (B) of the 1st, 2nd, and 3rd clutches
so that it pushes on the clutch return spring (C).
12. Check the placement of the clutch spring
compressor set. If either end of the clutch spring
compressor set is set over an area of the spring
retainer which is unsupported by the return spring,
the retainer may be damaged.
13. Compress the return spring until the snap ring can
be removed.
14. Remove the snap ring using snap ring pliers.
15. Remove the clutch spring compressor set.
08/08/21 14:51:29 61SNR030_140_0330
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст