Acura CSX. Manual — part 454
10
01
02
SNR9A00J46166453971KBAT00
20-135
20-135
Rear Seat-back Latch Replacement
A
B
B
A
B
A
B
Fastener Locations
A
: Bolt, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
3. Fold the seat-back down.
4. Lift the seat side bolster (A) up to release the hook
(B), then remove the seat side bolster.
5. Install the side bolster in the reverse order of
removal, and note these items:
• Guide the belts over the front of the seat side
bolster as you install the bolster.
• Before attaching the seat side bolster, make sure
there are no twists or kinks in the seat belts.
NOTE: Take care not to bend or scratch the interior trim.
1. Remove the rear shelf (see page 20-78).
2. From the trunk compartment, disconnect the seat-
back release cable (A) from the seat-back latch (B).
3. Remove the bolts, then remove the seat-back latch
(A).
08/08/21 15:04:04 61SNR030_200_0137
10
01
02
SNR9A00J46166453971KBAT00
20-135
20-135
Rear Seat-back Latch Replacement
A
B
B
A
B
A
B
Fastener Locations
A
: Bolt, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
3. Fold the seat-back down.
4. Lift the seat side bolster (A) up to release the hook
(B), then remove the seat side bolster.
5. Install the side bolster in the reverse order of
removal, and note these items:
• Guide the belts over the front of the seat side
bolster as you install the bolster.
• Before attaching the seat side bolster, make sure
there are no twists or kinks in the seat belts.
NOTE: Take care not to bend or scratch the interior trim.
1. Remove the rear shelf (see page 20-78).
2. From the trunk compartment, disconnect the seat-
back release cable (A) from the seat-back latch (B).
3. Remove the bolts, then remove the seat-back latch
(A).
08/08/21 15:04:04 61SNR030_200_0137
01
01
SNR9A00J46166454029KDAT00
20-136
20-136
Seats
Rear Seat-back Release Lever/Cable
Removal/Installation
Fastener Location
: Clip, 1
A
B
4. Install the latch in the reverse order of removal, and
note these items:
• Make sure the release cable is connected
securely.
• Make sure the seat-back locks securely and
unlocks properly.
NOTE: Take care not to bend or scratch the interior trim.
1. Open the trunk lid.
2. From the trunk compartment, detach the cable clip.
3. Disconnect the seat-back release cable (A) from the
seat-back latch (B).
08/08/21 15:04:04 61SNR030_200_0138
01
01
SNR9A00J46166454029KDAT00
20-136
20-136
Seats
Rear Seat-back Release Lever/Cable
Removal/Installation
Fastener Location
: Clip, 1
A
B
4. Install the latch in the reverse order of removal, and
note these items:
• Make sure the release cable is connected
securely.
• Make sure the seat-back locks securely and
unlocks properly.
NOTE: Take care not to bend or scratch the interior trim.
1. Open the trunk lid.
2. From the trunk compartment, detach the cable clip.
3. Disconnect the seat-back release cable (A) from the
seat-back latch (B).
08/08/21 15:04:04 61SNR030_200_0138
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст