Acura CSX. Manual — part 455
03
01
SNR9A00J46166414550KBAT00
Special Tools Required
20-137
20-137
Rear Seat Armrest Beverage Holder
Replacement
A
B
C
D
D
A
B
C
D
4. Push the tab (A) to release the hook (B), and rotate
the seat-back release lever (C) clockwise to release
the hook (D).
5. Install the release lever/cable in the reverse order
of removal, and note these items:
• Make sure the release cable is connected
securely.
• Make sure the seat-back locks securely and
unlocks properly.
KTC trim tool set SOJATP2014
NOTE:
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
• Take care not to tear or damage the seat covers.
1. Using a trim tool, push on the bottom ribs (A) of the
rear hooks (B) to pull up the beverage holder (C),
then release the hooks from the wire (D).
08/08/21 15:04:05 61SNR030_200_0139
07AAC-SEPA240
03
01
SNR9A00J46166414550KBAT00
Special Tools Required
20-137
20-137
Rear Seat Armrest Beverage Holder
Replacement
A
B
C
D
D
A
B
C
D
4. Push the tab (A) to release the hook (B), and rotate
the seat-back release lever (C) clockwise to release
the hook (D).
5. Install the release lever/cable in the reverse order
of removal, and note these items:
• Make sure the release cable is connected
securely.
• Make sure the seat-back locks securely and
unlocks properly.
KTC trim tool set SOJATP2014
NOTE:
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
• Take care not to tear or damage the seat covers.
1. Using a trim tool, push on the bottom ribs (A) of the
rear hooks (B) to pull up the beverage holder (C),
then release the hooks from the wire (D).
08/08/21 15:04:05 61SNR030_200_0139
07AAC-SEPA240
02
01
02
SNR9A00J46166453051KBAT00
20-138
20-138
Seats
Rear Seat Armrest Replacement
A
B
C
B
A
B
A
B
C
2. Release the front hooks (A) from the wire (B), then
remove the beverage holder (C).
3. Install the beverage holder in the reverse order of
removal. Make sure the front hooks are installed
securely to the wire, then push down on the
beverage holder and install the rear hooks into the
wire securely.
NOTE: Take care not to tear the seams or damage the
seat covers.
1. Remove the clip (A) from the left portion of the
armrest pivot (B).
2. Slide the armrest (A) toward the driver’s side of the
vehicle, and remove the pivot shaft (B) from the
collar (C) on the right side of the vehicle by pulling
back on the armrest.
08/08/21 15:04:05 61SNR030_200_0140
02
01
02
SNR9A00J46166453051KBAT00
20-138
20-138
Seats
Rear Seat Armrest Replacement
A
B
C
B
A
B
A
B
C
2. Release the front hooks (A) from the wire (B), then
remove the beverage holder (C).
3. Install the beverage holder in the reverse order of
removal. Make sure the front hooks are installed
securely to the wire, then push down on the
beverage holder and install the rear hooks into the
wire securely.
NOTE: Take care not to tear the seams or damage the
seat covers.
1. Remove the clip (A) from the left portion of the
armrest pivot (B).
2. Slide the armrest (A) toward the driver’s side of the
vehicle, and remove the pivot shaft (B) from the
collar (C) on the right side of the vehicle by pulling
back on the armrest.
08/08/21 15:04:05 61SNR030_200_0140
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст