Acura CSX. Manual — part 79
*01
03
04
10-20
Cooling System
B
6 x 1.0 mm
10 N·m (1.0 kgf·m, 7.2 lbf·ft)
6 x 1.0 mm
10 N·m
(1.0 kgf·m, 7.2 lbf·ft)
A
C
C
5. Disconnect the reservoir hose (A) and remove the
radiator cap base mounting bolts (B), and the
radiator upper brackets (C) and bolts (D).
6. Disconnect the upper radiator hose.
7. Raise the vehicle on the lift.
8. Remove the splash shield.
08/08/21 14:40:06 61SNR030_100_0020
*02
06
*03
10-21
B
A
C
A
B
6 x 1.0 mm
10 N·m (1.0 kgf·m, 7.2 lbf·ft)
A
6 x 1.0 mm
10 N·m (1.0 kgf·m, 7.2 lbf·ft)
C
9. Disconnect the engine coolant temperature (ECT)
sensor 2 connector (A), and remove the harness
clamp (B).
10. Disconnect the lower radiator hose (C) from the
radiator.
11. A/T model: Disconnect the automatic transmission
fluid (ATF) cooler hoses (A), then plug the lines and
the hoses.
12. Lower the vehicle on the lift.
13. Remove the condenser bracket mounting bolts (A)
and the bulkhead mounting bolts (B), then remove
the bulkhead (C).
08/08/21 14:40:28 61SNR030_100_0021
01
10-22
Cooling System
RADIATOR FAN MOTOR
6 x 1.0 mm
7 N·m
(0.7 kgf·m, 5 lbf·ft)
RADIATOR FAN
UPPER RADIATOR HOSE
LOWER RADIATOR HOSE
O-RING
RADIATOR CAP
RADIATOR
O-RING
LOWER CUSHION
DRAIN PLUG
6 x 1.0 mm
7 N·m
(0.7 kgf·m, 5 lbf·ft)
A/C CONDENSER
FAN/SHROUD ASSEMBLY
RADIATOR FAN SHROUD
ENGINE COOLANT TEMPERATURE
(ECT) SENSOR 2
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
3.85 N·m
(0.393 kgf·m, 2.84 lbf·ft)
6.0 N·m
(0.61 kgf·m, 4.4 lbf·ft)
QUICK CONNECTOR
O-RING
14. Pull up the radiator, then remove the fan shroud assemblies and other parts from the radiator.
15. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
16. Connect the lower radiator hose to the radiator.
17. Install the bulkhead in the reverse order of removal. Apply body paint to the bulkhead mounting bolts.
18. Do the battery installation procedure (see page 22-69).
19. Fill the radiator with engine coolant, and bleed the air from the cooling system with heater valve open (see step 6
on page 10-8).
20. Clean up any spilled engine coolant.
Replace.
Replace.
Replace.
08/08/21 14:40:29 61SNR030_100_0022
*01
SNR9A00A14426100000DAAT00
10-23
Fan Controls
Component Location Index
FAN CONTROL RELAY
UNDER-HOOD FUSE/RELAY BOX
RADIATOR FAN RELAY
A/C CONDENSER FAN ASSEMBLY
RADIATOR FAN ASSEMBLY
ENGINE COOLANT TEMPERATURE
(ECT) SENSOR 2
ENGINE COOLANT TEMPERATURE
(ECT) SENSOR 1
A/C CONDENSER FAN RELAY
Test, page 22-70
Test, page 22-70
Motor Test, page 10-5
Replacement, page 10-19
Motor Test, page 10-5
Replacement, page 10-19
Replacement, page 11-225
Replacement, page 11-225
Test, page 22-70
08/08/21 14:40:31 61SNR030_100_0023
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст