Acura CSX. Manual — part 436
*01
SNR9A00J26273400000DAAT00
20-65
Interior Trim
Component Location Index
CARPET
HEADLINER
A-PILLAR TRIM
FRONT DOOR OPENING SEAL
B-PILLAR UPPER TRIM
REAR DOOR OPENING SEAL
KICK PANEL
TRUNK TOOL BOX
REAR SHELF
TRUNK SIDE TRIM PANEL
TRUNK REAR TRIM PANEL
C-PILLAR TRIM
FRONT DOOR SILL TRIM
REAR DOOR SILL TRIM
SPARE TIRE LID
TRUNK LID TRIM
B-PILLAR LOWER TRIM PANEL
GRAB HANDLE
Replacement, page 20-88
Removal/Installation, page 20-84
Removal/Installation, page 20-69
Removal/Installation, page 20-66
Removal/Installation, page 20-72
Removal/Installation, page 20-67
Removal/Installation,
page 20-66
Removal/Installation, page 20-80
Removal/Installation, page 20-78
Removal/Installation, page 20-80
Removal/Installation, page 20-80
Removal/Installation,
page 20-75
Removal/Installation,
page 20-66
Removal/Installation,
page 20-67
Removal/Installation, page 20-80
Removal/Installation,
page 20-82
Removal/Installation, page 20-72
Removal/Installation, page 20-82
08/08/21 15:01:28 61SNR030_200_0067
05
02
03
SNR9A00J26273400000KDAT11
Special Tools Required
Driver’s side
Passenger’s side
Front Door Sill Area
20-66
Interior Trim
Trim Removal/Installation - Door Areas
A
B
C
D
E
F
G
G
A
B
A
B
G
G
Fastener Locations
: Clip, 1
F
: Clip, 4
G
(White)
(Orange)
E
Fastener Locations
: Clip, 1
F
: Clip, 4
G
(White)
(Orange)
A
B
C
D
E
F
G
B
A
A
B
G
G
G
E
A
B
A
A
KTC trim tool set SOJATP2014
NOTE:
• Put on gloves to protect your hands.
• Take care not to bend or scratch the trim and panels.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Driver’s side: Remove the footrest (see step 3 on
page 20-89).
2. Driver’s side: Remove the front side cap from the
front door sill trim, and remove the trunk lid/fuel fill
door opener lock cylinder and the screw (see page
20-184).
3. Detach the hooks (A) and the tabs (B) from the kick
panel (C) and the B-pillar lower trim (D), and pull
the front door sill trim (E) up by hand to detach the
clips (F, G), then remove it.
4. Pull out the front door opening seal (A) from the
trim hooks (B) and around the front door opening
flange, then remove the seal.
08/08/21 15:01:29 61SNR030_200_0068
07AAC-SEPA240
01
02
06
SNR9A00J26273400000KDAT12
Driver’s side
Passenger’s side
Special Tools Required
Rear Door Sill Area
20-67
20-67
Fastener Locations
: Clip, 2
A
Fastener Locations
: Clip, 2
B
Fastener Locations
: Clip, 2
(White)
A
B
C
D
A
5. Pull the driver’s kick panel (A) or the passenger’s
kick panel (B) back by hand to detach the clips, then
remove it.
6. Install the trim in the reverse order of removal, and
note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips and the hooks into place securely.
KTC trim tool set SOJATP2014
NOTE:
• Put on gloves to protect your hands.
• Take care not to bend or scratch the trim and panels.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
1. Detach the hooks (A) and the tab (B) from the
B-pillar lower trim (C), and pull the rear door sill
trim (D) up by hand to detach the clips, then
remove it.
08/08/21 15:01:29 61SNR030_200_0069
07AAC-SEPA240
07
08
20-68
Interior Trim
C
Fastener Locations
: Clip, 2
(White)
B
D
E
D
D
E
A
E
A
B
A
2. Pull the seat hook knob (A) while pushing down on
the rear seat cushion (B) to release the hook (C).
While pulling the cushion up, detach the clips and
remove the rear door sill trim (D) from the rear
door opening seal (E).
3. Pull out the rear door opening seal (A) from the
trim hooks (B) and around the rear door opening
flange, then remove the seal.
4. Install the trim in the reverse order of removal, and
note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips and the hooks into place securely.
08/08/21 15:01:30 61SNR030_200_0070
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст