Acura CSX. Manual — part 671
*01
SNR9A00H46200000000DAAT00
24-3
Seat Belts
Component Location Index
REAR SEAT BELT
SHOULDER ANCHOR ADJUSTER
FRONT SEAT BELT
FRONT SEAT BELT BUCKLES
REAR CENTER SEAT BELT and
REAR SEAT BELT BUCKLES
Replacement, page 24-7
Inspection, page 24-9
Replacement, page 24-4
Inspection, page 24-9
Replacement, page 24-6
Replacement, page 24-8
Inspection, page 24-9
08/08/21 13:54:07 61SNR030_240_0003
01
02
03
04
SNR9A00H46200053401KBAT00
Front Seat Belt
24-4
Seat Belts
Front Seat Belt Replacement
A
A
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
A
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
A
F
D
B
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
C
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
F
E
Front
SRS components are located in this area. Review the
SRS component locations (see page 24-11) and the
precautions and procedures (see page 24-13) before
doing repairs or service.
NOTE:
• Check the front seat belts for damage (see page 24-9),
and replace them if necessary.
• If replacing the front seat belt after deployment, refer
to Component Replacement/Inspection After
Deployment (see page 24-185) for a complete list of
other parts that must also be replaced.
1. Do the battery terminal disconnection procedure
(see page 22-68), and wait at least 3 minutes before
beginning work.
2. Slide the front seat forward fully, and remove the
anchor cover (A).
3. Remove the lower anchor bolt (A).
4. Remove the B-pillar lower trim (see page 20-72).
5. Remove the B-pillar upper trim and slider (see page
20-72).
6. Remove the upper anchor bolt (A).
7. Disconnect the seat belt tensioner connector (A).
Remove the upper retractor mounting bolt (B) and
the lower retractor bolt (C), then remove the front
seat belt (D) and retractor (E).
8. If necessary, remove the front seat belt protector
(F).
08/08/21 13:54:08 61SNR030_240_0004
05
06
Upper anchor bolt installation
24-5
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
A
UPPER ANCHOR
UPPER ANCHOR
BOLT
TOOTHED
LOCK WASHER
BUSHING
THREAD LOCK
COLLAR
9. Remove the shoulder anchor adjuster (A).
10. Install the seat belt in the reverse order of removal,
and note these items:
• Apply medium strength liquid thread lock to the
anchor bolts before reinstallation.
• Tighten the bolts by hand first, then tighten to the
specification with a torque wrench.
• Check that the retractor locking mechanism
functions as described (see page 24-9).
• Assemble the washer, collar, and bushing on the
upper anchor bolt as shown.
• If the seat belt tensioner has been deployed,
replace the front seat belt protector with a new
one.
• Before installing the anchor bolts, make sure
there are no twists or kinks in the seat belt.
• Make sure the seat belt tensioner connector is
properly plugged in.
• Check for any DTCs that may have been set
during repairs, and clear them using the HDS.
• Do the battery terminal reconnection procedure
(see page 22-68).
08/08/21 13:54:08 61SNR030_240_0005
07
02
09
Front Seat Belt Buckle
Driver’s seat
Passenger’s seat
24-6
Seat Belts
B
C
A
A
B
A
7/16-20 UNF
32 N·m
(3.3 kgf·m, 24 lbf·ft)
B
D
C
SRS components are located in this area. Review the
SRS component locations (see page 24-11) and the
precautions and procedures (see page 24-13) before
doing repairs or service.
NOTE: If replacing the front seat belt after deployment,
refer to Component Replacement/Inspection After
Deployment (see page 24-185) for a complete list of
other parts that must also be replaced.
1. Do the battery terminal disconnection procedure
(see page 22-68), and wait at least 3 minutes before
beginning work.
2. Remove the front seat (see page 20-118).
3. Lift up the front seat, then detach the seat belt
switch connector (A) and seat belt buckle tensioner
connector (B), and on the driver’s seat, detach the
harness clip (C).
4. Remove the center anchor bolt (A), then remove
the seat belt buckle (B) from the elastic band (C).
5. Pull the seat belt switch harness (D) out through the
space between the seat cushion and the seat track
(driver’s seat), or through the hole in the seat track
(passenger’s seat).
08/08/21 13:54:08 61SNR030_240_0006
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст