Acura RSX Honda Integra. Manual — part 394
01
S6M6A00J18526234611KBAT01
01
S6M6A00J18500028101KBAT00
For Some Models
20-113
20-113
Rear Strake Replacement
Fuel Pipe Protector Replacement
Fastener Locations
: Bolt, 5
A
C
B
: Clip, 2
B
B
A
A
A
A
A
C
Forward
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
Fastener Locations
: Clip, 4
A
1. Remove the bolts (A) and clips (B), then remove the
rear strake (C) on each side. Take care not to
scratch the body.
2. Install the strake in the reverse order of removal,
and note these items:
• Replace any damaged or stress-whitened clips.
• Push the clips into place securely.
1. Remove the clips, then remove the fuel pipe
protector (A). Take care not to scratch the body.
2. Install the protector in the reverse order of removal,
and note these items:
• Replace any damaged or stress-whitened clips.
• Push the clips into place securely.
05/06/27 18:24:59 61S6M040_200_0114
01
S6M6A00J18526234603KBAT01
01
S6M6A00J18526249601KBAT00
20-114
20-114
Fenderwell
Rear Inner Fender Replacement
Rear Air Outlet Replacement
Fastener Location
A
: Screw, 1
A
B
A
1. Release the wheel arch portion of the rear bumper,
as necessary, ’02-04 models (see page 20-95),
’05-06 models (see page 20-96).
2. Remove the screw, then remove the rear inner
fender (A). Take care not to scratch the body.
3. Install the inner fender in the reverse order of
removal.
1. Remove the rear bumper, ’02-04 models (see page
20-95), ’05-06 models (see page 20-96).
2. Detach the hooks (A), then remove the rear air
outlet (B). Take care not to scratch the body.
3. Install the air outlet by pushing on the hook
portions until the hooks snap into place.
05/06/27 18:25:00 61S6M040_200_0115
*01
S6M6A00J18533232001DAAT00
20-115
Openers
Component Location Index
HOOD OPENER CABLE
HATCH HANDLE
FUEL FILL DOOR LATCH
HATCH LATCH
FUEL FILL DOOR OPENER
HOOD RELEASE HANDLE
HOOD LATCH
FUEL FILL DOOR OPENER CABLE
Replacement, page 20-116
Replacement, page 20-121
page 20-117
Replacement, page 20-122
Replacement, page 20-120
page 20-116
Replacement, page 20-119
Replacement, page 20-117
05/06/27 18:25:02 61S6M040_200_0116
01
S6M6A00J18533232001KBAT00
20-116
Openers
Hood Opener Cable Replacement
Fastener Locations
C
: Bolt, 2
E
: Clip, 3
C
C
E
E
E
D
D
B
A
F
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the body and related parts.
1. Remove these items from the left side of the vehicle:
• Inner fender (see page 20-111)
• Kick panel (see page 20-50)
2. Disconnect the hood opener cable (A) from the hood latch (B) (see page 20-119), and remove the bolts (C), then
remove the hood release handle (D) from the body.
3. Using a clip remover, detach the clips (E), and remove the grommet (F) from the body, then remove the hood
opener cable from the vehicle. Take care not to kink the cable.
4. Install the cable in the reverse order of removal, and replace any damaged or stress-whitened clips.
05/06/27 18:25:02 61S6M040_200_0117
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст