Acura RSX Honda Integra. Manual — part 144
01
S6M6A10A20326936301KBAT20
02
S6M6A11A20326936301KBAT20
K20A2/K20Z1 engines
K20A3 engine
11-282
11-282
PGM-FI System
Knock Sensor Replacement
B
31 N·m
(3.2 kgf·m,
23 lbf·ft)
A
A
31 N·m
(3.2 kgf·m, 23 lbf·ft)
1. Remove the intake manifold bracket (A).
2. Disconnect the knock sensor 1P connector.
3. Remove the knock sensor (B).
4. Install the sensor in the reverse order of removal.
1. Remove the intake manifold (see page 9-2).
2. Disconnect the knock sensor 1P connector.
3. Remove the knock sensor (A).
4. Install the sensor in the reverse order of removal.
05/06/27 17:39:31 61S6M040_110_0282
01
S6M6AALA20326943821KBAT02
2005-2006 M/T models
11-283
Output Shaft (Countershaft) Speed Sensor Replacement
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
A
B
C
1. Remove the air cleaner (see page 11-407).
2. Disconnect the output shaft (countershaft) speed
sensor connector (A).
3. Remove the output shaft (countershaft) speed
sensor (B).
4. Install the sensor in the reverse order of removal
with a new O-ring (C).
05/06/27 17:39:31 61S6M040_110_0283
04
S6M6AAJA20300024601KBAT00
04
S6M6AALA20300024601KBAT00
2002-2004 models
2005-2006 models
11-284
11-284
PGM-FI System
ECM/PCM Replacement
A
B
C
A
B
C
1. Disconnect the negative cable from the battery.
2. Remove the passenger’s dashboard lower cover
(A) (see page 20-67).
3. Remove the ECM/PCM mounting bolts (B) and the
ECM/PCM (C).
4. Install the ECM/PCM in the reverse order of
removal.
5. Reconnect the negative cable to the battery.
6. Do the ECM/PCM idle learn procedure (see page
11-349).
1. Jump the SCS line with the HDS.
2. Remove the passenger’s dashboard lower cover
(A) (see page 20-67).
3. Remove the ECM/PCM mouting bolts (B) and the
ECM/PCM (C).
4. Install the ECM/PCM in the reverse order of
removal.
5. Open the SCS line with the HDS.
6. Turn the ignition switch ON (II).
NOTE: DTC P0630 ‘‘VIN Not Programmed or
Mismatch’’ may be stored because the VIN has not
been programmed into the ECM/PCM; ignore it,
and continue this procedure.
7. Input the VIN to the ECM/PCM with the HDS.
8. Rewrite the immobilizer code with the ECM/PCM
replacement procedure in the HDS; it allows you to
start the engine.
9. Reset the ECM/PCM with the HDS.
10. Do the ECM/PCM idle learn procedure (see page
11-349).
11. Do the CKP pattern learn procedure (see page 11-5).
05/06/27 17:39:32 61S6M040_110_0284
*01
S6M6A00A14680400000DAAT30
11-285
VTEC/VTC
Component Location Index
ROCKER ARM OIL CONTROL SOLENOID
(VTEC SOLENOID VALVE)
ROCKER ARM OIL PRESSURE SWITCH
(VTEC OIL PRESSURE SWITCH)
VTC OIL CONTROL SOLENOID VALVE
CAMSHAFT POSITION (CMP) SENSOR A
VTC STRAINER
Inspection, page 11-323
Removal/Installation, page 11-324
Removal/Installation, page 11-324
Removal/Test/Installation,
page 11-321
Replacement, page 11-323
*: This illustration shows the 2002-2004 K20A3 engine model; the other models are similar.
05/06/27 17:39:33 61S6M040_110_0285
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст