Acura RSX Honda Integra. Manual — part 444
―――
+
+
+
+
+
+
―――
―――
―――
―――
−
−
−
−
−
−
01
Audio Unit Connector Inputs and Outputs
Without BOSE Sound System
Cavity
Wire
Connects to
22-115
When replacing an audio unit connector, match the wires to the cavities as listed in the following table.
1
YEL/GRN
Antenna amplifier power
2
YEL/RED
ACC (Main stereo power supply)
3
Not used
4
RED/WHT
Security input
5
PNK
Right rear speaker (
)
6
BLU/WHT
Left rear speaker (
)
7
GRN/YEL
Passenger’s door speaker (
), Right tweeter (
)
8
GRN/BLK
Driver’s door speaker (
), Left tweeter (
)
9
RED/BLK
Lights-on signal
10
WHT/RED
Constant power
11
Not used
12
Not used
13
Not used
14
Not used
15
BLU/YEL
Right rear speaker (
)
16
BLU/BLK
Left rear speaker (
)
17
GRY/RED
Passenger’s door speaker (
), Right tweeter (
)
18
LT GRN
Driver’s door speaker (
), Left tweeter (
)
19
RED
Dash lights brightness controller (In the gauge assembly)
20
BLK
Ground (G403)
: ’05-06 models
(cont’d)
05/06/27 18:04:11 61S6M040_220_0116
−
−
+
+
―――
+
−
−
−
−
―――
+
−
−
+
―――
−
+
+
+
+
―――
−
−
+
+
01
Front Stereo Amplifier Connector Inputs and Outputs
With BOSE Sound System
Cavity
Wire
Connects to
22-116
Audio System
System Description (cont’d)
When replacing a stereo amplifier connector, match the wires to the cavities as listed in the following table.
1
GRY/RED
Passenger’s door speaker (
), Right tweeter (
)
2
GRN/YEL
Passenger’s door speaker (
), Right tweeter (
)
3
BLU/RED
Constant power
4
Not used
5
BRN
Radio switch
6
LT GRN
Rear stereo amplifier-bass signal (
)
7
RED
Audio unit-right rear (
)
8
GRN
Audio unit-right front (
)
9
BLK
Audio unit-left rear (
)
10
BRN
Audio unit-left front (
)
11
Not used
12
BLU/WHT
Left rear speaker (
)
13
BLU/BLK
Left rear speaker (
)
14
BLU/YEL
Right rear speaker (
)
15
PNK
Right rear speaker (
)
16
BLK
Ground (G502)
17
WHT/BLU
Shielding
18
Not used
19
GRN/WHT
Rear stereo amplifier-bass signal (
)
20
YEL
Audio unit-right rear (
)
21
ORN
Audio unit-right front (
)
22
WHT
Audio unit-left rear (
)
23
BLU
Audio unit-left front (
)
24
Not used
25
LT GRN
Driver’s door speaker (
), Left tweeter (
)
26
GRN/BLK
Driver’s door speaker (
), Left tweeter (
)
05/06/27 18:04:11 61S6M040_220_0117
―――
+
―――
−
01
Rear Stereo Amplifier Connector Inputs and Outputs
With BOSE Sound System
Cavity
Wire
Connects to
22-117
When replacing a stereo amplifier connector, match the wires to the cavities as listed in the following table.
1
WHT
Rear stereo amplifier relay (power when radio is ON)
2
Not used
3
BLK
Ground (G502)
4
LT GRN
Front stereo amplifier-bass (
)
5
Not used
6
GRN/WHT
Front stereo amplifier-bass (
)
Terminal side of
male terminals
05/06/27 18:04:11 61S6M040_220_0118
01
02
S6M6A30J10311113151KDAT00
With BOSE Sound System
22-118
Audio System
Audio Unit Removal/Installation
D
B
A
C
A
C
B
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard and related
parts.
1. Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio’s
preset buttons.
2. Remove the dashboard center lower cover
(see page 20-65).
3. Remove the two mounting bolts, then remove the
center panel.
4. Disconnect the audio unit connector (A), antenna
lead (B) and hazard warning switch connector (C),
then remove the audio unit (D).
5. Remove the four mounting bolts and the audio unit
assembly (A) from the audio bracket (B).
6. Remove the hazard warning switch (C) from the
audio unit assembly.
7. Install the hazard warning switch to the audio unit,
then install the audio unit in the reverse order of
removal, and note these items:
• Install the hazard warning switch in the audio
unit.
• Make sure the audio unit and hazard warning
light switch connectors are plugged in properly,
and the antenna lead is connected properly.
• Enter the anti-theft code for the radio, then enter
the customer’s radio station presets.
05/06/27 18:04:12 61S6M040_220_0119
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст