Acura RSX Honda Integra. Manual — part 123
08
−
−
−
−
YES
NO
YES
NO
11-198
PGM-FI System
DTC Troubleshooting (cont’d)
A
19. Replace PGM-FI main relay 1 (FI MAIN) (A).
20. Reconnect all connectors.
21. Turn the ignition switch ON (II).
22. Reset the ECM/PCM with the HDS.
23. Turn the ignition switch OFF.
24. Wait 10 seconds.
25. Do the ECM/PCM idle learn procedure (see page
11-349).
26. Check for Temporary DTCs or DTCs with the HDS.
If DTC P0563 is indicated, check for poor
connections or loose terminals at PGM-FI main
relay 1 (FI MAIN) and the ECM/PCM, then go to
step 1. If any other Temporary DTCs or DTCs are
indicated, go to the indicated DTC’s
troubleshooting.
Troubleshooting is complete.
27. Update the ECM/PCM if it does not have the latest
software, or substitute a known-good ECM/PCM
(see page 11-6).
28. Check for Temporary DTCs or DTCs with the HDS.
If DTC P0563 is indicated, check for poor
connections or loose terminals at PGM-FI main
relay 1 (FI MAIN) and the ECM/PCM, then go to
step 1. If any other Temporary DTCs or DTCs are
indicated, go to the indicated DTC’s
troubleshooting.
If the ECM/PCM was updated, troubleshooting
is complete. If the ECM/PCM was substituted,
replace the original ECM/PCM (see page 11-284).
Ar e any T empor ar y DT Cs or DT Cs indicated?
Ar e any T empor ar y DT Cs or DT Cs indicated?
05/06/27 17:35:50 61S6M040_110_0198
S6M6AALK72100090602FAAT00
−
−
DTC P0602:
YES
NO
11-199
ECM/PCM Programming Error
(2005-2006 models)
NOTE:
• This DTC is indicated when the ECM/PCM update is
not completed.
• Do not turn the ignition switch OFF while updating
the ECM/PCM. If you turn the ignition switch OFF
before completion, the ECM/PCM will be damaged.
1. Update the ECM/PCM (see page 11-6).
2. Check for Temporary DTCs or DTCs with the HDS.
Replace the original ECM/PCM (see page
11-284).
Troubleshooting is complete.
Is DT C P0602 indicated?
05/06/27 17:35:50 61S6M040_110_0199
S6M6AALK72100090603FAAT30
S6M6AALK72100090606FAAT00
−
−
−
−
DTC P0603:
DTC P0606:
YES
NO
YES
NO
11-200
11-200
PGM-FI System
DTC Troubleshooting (cont’d)
ECM/PCM Internal Circuit
Malfunction (Keep Alive Memory (KAM)
Error)
(2005-2006 models)
ECM/PCM Processor Malfunction
(2005 model)
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Wait for 1 second.
4. Check for Temporary DTCs or DTCs with the HDS.
Update the ECM/PCM if it does not have the
latest software, or substitute a known-good ECM/
PCM (see page 11-6), then recheck. If the symptom/
indication goes away with a known-good ECM/PCM,
replace the original ECM/PCM (see page 11-284).
Intermittent failure, system is OK at this
time.
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF.
4. Turn the ignition switch ON (II).
5. Wait 40 seconds.
6. Check for Temporary DTCs or DTCs with the HDS.
Update the ECM/PCM if it does not have the
latest software, or substitute a known-good ECM/
PCM (see page 11-6), then recheck. If the symptom/
indication goes away with a known-good ECM/PCM,
replace the original ECM/PCM (see page 11-284).
Intermittent failure, system is OK at this
time.
Ar e any T empor ar y DT Cs or DT Cs indicated?
Is DT C P0606 indicated?
05/06/27 17:35:50 61S6M040_110_0200
S6M6AACK72100090607FAAT00
−
−
DTC P0607:
DTC P1607:
YES
NO
11-201
ECM/PCM Internal Circuit
Malfunction
(2004 model)
ECM/PCM Internal Circuit
Malfunction
(2002-2003 models)
NOTE:
• Information marked with an asterisk ( ) applies to
2004 model.
• Information marked with double asterisk (
) applies
to 2002-2003 models.
1. Reset the ECM/PCM (see page 11-4).
2. Turn the ignition switch ON (II).
3. Wait 40 seconds.
Update the ECM/PCM if it does not have the
latest software, or substitute a known-good ECM/
PCM (see page 11-6), then recheck. If the symptom/
indication goes away with a known-good ECM/PCM,
replace the original ECM/PCM (see page 11-284).
Intermittent failure, system is OK at this
time.
Is DT C P0607 ( P1607 )
indicated?
05/06/27 17:35:50 61S6M040_110_0201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст