Acura RSX Honda Integra. Manual — part 34
S6M6A000000000J0401ZAAT00
S6M6A000000000J0501ZCAT00
Engine Mechanical
Engine Assembly
. . . . . . . . . . . . ...
. . . . . . . . . . . . ...
Cylinder Head
. 6-1
. . . . . . . . . . . . .
. . . . . . . . . . . . .
Engine Block
. 7-1
. . . . . . . . . . ..
. . . . . . . . . . ..
Engine Lubrication
. 8-1
. . .
. . .
Intake Manifold and Exhaust System
. 9-1
. . . . . . . . . . . . . . ..
. . . . . . . . . . . . . ...
. . . . . . . . . ...
. . . . . . . . . . . . . . ..
. . . . . . . . . . . . . ...
. . . . . . . . . ...
Engine Removal
. 5-2
Engine Installation
. 5-11
Engine Mount Replacement
. 5-21
01
02
03
S6M6A00A18223800000KAAT00
5-2
Engine Assembly
Engine Removal
C
B
A
NOTE:
• Use fender covers to avoid damaging painted
surfaces.
• To avoid damaging the wire and terminals, unplug
the wiring connectors carefully while holding the
connector portion.
• Mark all wiring and hoses to avoid misconnection.
Also, be sure that they do not contact other wiring or
hoses, or interfere with other parts.
1. Secure the hood in the wide open position (support
rod in the lower hole).
2. Make sure you have the anti-theft code for the radio,
then write down the customer’s audio presets.
3. Relieve fuel pressure (see page 11-360).
4. Disconnect the negative cable from the battery first,
then disconnect the positive cable.
5. Remove the battery.
6. Remove the intake manifold cover.
7. Disconnect the intake air temperature (IAT) sensor
connector (A), and remove the breather hose (B),
then remove the air cleaner housing (C).
8. Remove the air intake duct.
04
05
06
5-3
A
C
B
A
C
D
B
C
B
C
A
9. Remove the battery cable (A) from the under-hood
fuse/relay box, then remove the harness clamps (B)
and ground cable (C).
10. K20A3 engine: Remove the throttle cover (A). Fully
open the throttle link and cruise control link by
hand, then remove the throttle cable (B) and cruise
control actuator cable (C) from the links. Loosen the
locknuts (D), and remove the cables from the
bracket.
11. K20A2, K20Z1 engines: Fully open the throttle link
and cruise control link by hand, then remove the
throttle cable (A) and cruise control actuator cable
(B) from the links. Loosen the locknuts (C), and
remove the cables from the bracket.
(cont’d)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст