Acura RSX Honda Integra. Manual — part 496
03
04
*02
−
−
’02-04 models
’05-06 models
YES
NO
23-116
SRS
DTC Troubleshooting (cont’d)
K
GRN
OPDS UNIT 8P CONNECTOR D
OPDS UNIT 8P CONNECTOR D
ORN
11. Turn the ignition switch OFF.
12. Disconnect the dashboard wire harness 17P
connector K from the under-dash fuse/relay box.
13. Turn the ignition switch ON (II).
14. Check for voltage between the No. 3 terminal of the
OPDS unit 8P connector D and body ground. There
should be 0.5 V or less.
Faulty OPDS unit; replace the OPDS unit
(see page 23-143).
Go to step 15.
Wire side of female terminals
Wire side of female terminals
Is the voltage as specif ied?
05/06/27 18:11:06 61S6M040_230_0116
03
09
*03
−
−
’02-04 models
’05-06 models
YES
NO
23-117
B
OPDS UNIT 8P CONNECTOR D
GRN
OPDS UNIT 8P CONNECTOR D
ORN
15. Turn the ignition switch OFF.
16. Remove the gauge assembly (see page 22-74), then
disconnect gauge assembly connector B (18P ) or
(16P ) from the gauge assembly.
1: ’02-04 models
2: ’05-06 models
17. Turn the ignition switch ON (II).
18. Check for voltage between the No. 3 terminal of the
OPDS unit 8P connector D and body ground. There
should be 0.5 V or less.
Short to power in the gauge assembly;
replace the gauge assembly.
Go to step 19.
(cont’d)
1
2
Wire side of female terminals
Wire side of female terminals
Is the voltage as specif ied?
05/06/27 18:11:06 61S6M040_230_0117
*04
10
*05
−
−
’02-04 models
’05-06 models
YES
NO
23-118
SRS
DTC Troubleshooting (cont’d)
A
(C503)
B
(C503)
OPDS UNIT 8P CONNECTOR D
GRN
OPDS UNIT 8P CONNECTOR D
ORN
19. Turn the ignition switch OFF.
20. Disconnect the floor wire harness 21P
or 20P
connector (A) from the dashboard wire harness
connector C503 (B).
1: ’02-04 models
2: ’05-06 models
21. Turn the ignition switch ON (II).
22. Check for voltage between the No. 3 terminal of the
OPDS unit 8P connector D and body ground. There
should be 0.5 V or less.
Short to power in the dashboard wire
harness; replace the dashboard wire harness.
Short to power in the floor wire harness or in
the OPDS unit harness, or seat subharness (with
BOSE sound system); if the OPDS unit harness is
OK, replace the floor wire harness.
1
2
Wire side of female terminals
Wire side of female terminals
Is the voltage as specif ied?
05/06/27 18:11:06 61S6M040_230_0118
08
05
*06
−
−
’02-04 models
’05-06 models
YES
NO
23-119
B
GAUGE ASSEMBLY CONNECTOR B (18P)
PNK/BLU
GAUGE ASSEMBLY CONNECTOR B (18P)
PNK/BLU
23. Turn the ignition switch OFF.
24. Remove the gauge assembly (see page 22-74).
With the connectors still connected to the gauge
assembly, backprobe the No. 8
or No. 7
terminal
of gauge assembly connector B (18P ) or (16P ).
1: ’02-04 models
2: ’05-06 models
25. Turn the ignition switch ON (II).
26. Check for voltage between the No. 8
or No. 7
terminal of gauge assembly connector B (18P ) or
(16P ) and body ground. There should be battery
voltage.
1: ’02-04 models
2: ’05-06 models
Go to step 27.
Go to step 31.
(cont’d)
1
2
1
2
1
2
1
2
Wire side of female terminals
Wire side of female terminals
Is ther e batter y voltage?
05/06/27 18:11:07 61S6M040_230_0119
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст