Acura ILX (2021 year). Manual in english — page 8

uu

Locking and Unlocking the Doors

u

Childproof Door Locks

126

Co
ntrols

Press the master door lock switch in as shown
to lock or unlock all the doors.

Childproof Door Locks

The childproof door locks prevent the rear doors from being opened from the inside
regardless of the position of the lock tab.

Slide the lever in the rear door to the lock
position, and close the door.

■

When opening the door

Open the door using the outside door handle.

■

Using the Master Door Lock Switch

1

Using the Master Door Lock Switch

When you lock/unlock either front door using the
master door lock switch, all the other doors lock/
unlock at the same time.

To Unlock

To Lock

Master Door Lock Switch

■

Setting the Childproof Door Locks

1

Childproof Door Locks

To open the door from the inside when the
childproof door lock is on, put the lock tab in the
unlock position, lower the rear window, put your
hand out of the window, and pull the outside door
handle.

Unlock

Lock

127

uu

Locking and Unlocking the Doors

u

Auto Door Locking/Unlocking

Co
ntrols

Auto Door Locking/Unlocking

Your vehicle locks or unlocks all doors automatically when a certain condition is met.

■

Drive lock mode

All doors lock when the vehicle’s speed reaches about 10 mph (15 km/h).

■

Driver’s door open mode

All doors unlock when the driver’s door is opened.

■

Auto Door Locking

■

Auto Door Unlocking

1

Auto Door Locking/Unlocking

You can turn off or change to another auto door
locking/unlocking setting using the multi-information
display.

2

Customized Features

P. 99

You can turn off or change to another auto door
locking/unlocking setting using the information
screen or multi-information display.

2

Customized Features

P. 99, 315

Models with one display

Models with two displays

128

Co
ntrols

Opening and Closing the Trunk

Precautions for Opening/Closing the Trunk

■

Opening the trunk

Open the trunk all the way.

u

If it is not fully opened, the trunk lid may begin to close under its own weight.

■

Closing the trunk

Keep the trunk lid closed while driving to:

u

Avoid possible damage.

u

Prevent exhaust gas from leaking into the vehicle.

2

Exhaust Gas Hazard

P. 69

Using the Trunk Opener

Pulling the trunk opener on the lower left of
the driver's seat unlocks and opens the trunk.

Trunk Opener

129

uu

Opening and Closing the Trunk

u

Using the Trunk Release Button

Co
ntrols

■

Locking the trunk opener

You can lock the trunk opener with the built-
in key.

Using the Trunk Release Button

Press the release button on the trunk lid after
the doors are unlocked.

Even if the trunk is locked, you can open the
trunk if you carry the keyless access remote.

u

The beeper sounds.

1

Using the Trunk Release Button

•

If you forget the keyless access remote inside, the
beeper will sound and the trunk will not close.

•

A person who is not carrying the keyless access
remote can unlock the trunk if a person who is
carrying it is within range.

•

If the beeper sounds after you close the trunk,
move the keyless access remote away from the
trunk and close again.

•

The keyless access remote may not operate if it is
too close to the trunk.

Trunk Release

Button

130

uu

Opening and Closing the Trunk

u

Using the Remote Transmitter

Co
ntrols

Using the Remote Transmitter

Press the trunk release button for
approximately one second to unlock and open
the trunk.

Trunk Main Switch

The trunk main switch disables the trunk
release button on the remote transmitter and
the trunk release button on the trunk lid to
protect luggage in the trunk.

1.

Make sure the rear seat-back is not folded
down.

2.

Turn off the trunk main switch in the glove
box.

3.

Lock the glove box.

4.

Lock the trunk opener.

2

Using the Trunk Opener

P. 128

1

Using the Remote Transmitter

If the driver’s door is locked, the trunk will
automatically lock when you close it. Otherwise, you
will have to lock it manually.

Trunk

Release

Button

Trunk

Release

Button

1

Trunk Main Switch

If you need to give the key to someone else, remove
the built-in key from the keyless access remote by
sliding the release knob, and give the remote as a
valet key.

ON

OFF

Main Switch

131

uu

Opening and Closing the Trunk

u

Emergency Trunk Opener

Co
ntrols

Emergency Trunk Opener

The trunk release lever allows you to open the
trunk from inside for your safety.

Slide the release lever in the direction of the
arrow.

1

Emergency Trunk Opener

Parents should decide if their children should be
shown how to use this feature.

Lever

132

Co
ntrols

Security System

Immobilizer System

This system prevents a key that has not been pre-registered from starting the
engine.

Pay attention to the following when pressing the

ENGINE START/STOP

button:

•

Do not allow objects that emit strong radio waves near the

ENGINE START/

STOP

button.

•

Make sure the key is not covered by or touching a metal object.

•

Do not bring a key from another vehicle’s immobilizer system near the

ENGINE

START/STOP

button.

•

Do not put the key near magnetic items. Electronic devices, such as televisions
and audio systems emit strong magnetic fields. Note that even a key chain can
become magnetic.

Security System Alarm

The security system alarm activates when the trunk, hood or doors are forcibly
opened. The alarm does not activate if the trunk or doors are opened with the key,
remote transmitter or keyless access system.

However, the alarm activates if a door is opened with the key and then the
transmission is taken out of

(

P

or the hood is opened before the power mode is set

to ON.

■

When the security system alarm activates

The horn sounds intermittently and some exterior lights flash.

1

Immobilizer System

NOTICE

Leaving the key in the vehicle can result in theft or
accidental movement of the vehicle.
Always take the key with you whenever you leave the
vehicle unattended.

Do not alter the system or add other devices to it.
Doing so may damage the system and make your
vehicle inoperable.

1

Security System Alarm

Do not alter the system or add other devices to it.
Doing so may damage the system and make your
vehicle inoperable.

The security system alarm continues for a maximum
of two minutes until the security system alarm
deactivates.

Continued

133

uu

Security System

u

Security System Alarm

Co
ntrols

■

To deactivate the security system alarm

Unlock the vehicle using the key, remote transmitter or keyless access system, or set
the power mode to ON. The system, along with the horn and flashing lights, is
deactivated.

■

Setting the security system alarm

The security system alarm automatically sets when the following conditions have
been met:

•

The power mode is set to VEHICLE OFF (LOCK).

•

The hood is closed.

•

All doors and the trunk are locked from outside with the key, remote transmitter
or keyless access system.

■

When the security system alarm sets

The security system alarm indicator in the instrument panel blinks and the blinking
interval changes after about 15 seconds.

■

To cancel the security system alarm

The security system alarm is canceled when the vehicle is unlocked using the remote
transmitter or keyless access system, or when the power mode is set to ON. The
security system alarm indicator goes off at the same time.

1

Security System Alarm

Do not set the security system alarm when someone
is in the vehicle or a window is open. The system can
accidentally activate when:

•

Unlocking the door with the lock tab.

•

Opening the trunk with the trunk opener or the
emergency trunk opener.

•

Opening the hood with the hood release.

•

Taking the transmission out of

(

P

.

If the battery goes dead after you have set the
security system alarm, the security alarm may go off
once the battery is recharged or replaced.
If this occurs, deactivate the security system alarm by
unlocking a door using the key, remote transmitter,
or keyless access system.

134

uu

Security System

u

Security System Alarm

Co
ntrols

■

The panic button on the remote
transmitter

If you press the panic button for
approximately one second, the following will
occur for about 30 seconds:

•

The horn sounds.

•

Some exterior lights flash.

■

Canceling panic mode

•

Press any button on the remote transmitter.

•

Set the power mode to ON.

■

Panic Mode

Panic

Button

Panic

Button

135

Continued

Co
ntrols

Windows

Opening/Closing the Power Windows

The power windows can be opened and closed when the power mode is in ON,
using the switches on the doors.

The driver’s side switches can be used to open and close all the windows. The power
window lock button on the driver's side must be switched off (not pushed in,
indicator off) to open and close the windows from anywhere other than the driver’s
seat.

When the power window lock button is pushed in, the indicator comes on and you
can only operate the driver’s window. Turn the power window lock button on if a
child is in the vehicle.

■

Manual operation

To open:

Push the switch down lightly, and

hold it until the desired position is reached.

To close:

Pull the switch up lightly, and hold it

until the desired position is reached.

■

Automatic operation

To open:

Push the switch down firmly.

To close:

Pull the switch up firmly.

The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly.

■

Opening/Closing the Windows with Auto-Open/Close

Function

1

Opening/Closing the Power Windows

The power windows can be operated for up to 10
minutes after you set the power mode to VEHICLE
OFF (LOCK).
Opening either front door cancels this function.

Auto Reverse

If a power window senses resistance when closing
automatically, it will stop closing and reverse
direction.

The driver’s window auto reverse function is disabled
when you continuously pull up the switch.

The auto reverse function stops sensing when the
window is almost closed to ensure that it fully closes.

3

WARNING

Closing a power window on someone's
hands or fingers can cause serious injury.

Make sure your passengers are away from
the windows before closing them.

ON
OFF

Power Window

Lock Button

Indicator

Driver’s

Window

Switch
Front Passenger’s

Window Switch

uu

Windows

u

Opening/Closing the Power Windows

136

Co
ntrols

To open:

Push the switch down.

To close:

Pull the switch up.

Release the switch when the window reaches
the desired position.

To open:

Press the unlock button, and then

within 10 seconds, press it again and hold it.

If the windows stop midway, repeat the
procedure.

■

Opening/Closing Windows without Auto-Open/Close Function

1

Opening/Closing the Power Windows

While driving with any of the windows open, you
may hear a booming, throbbing, or helicopter-type
noise or pressure. This is called wind buffeting. This is
a normal occurrence that can be minimized.

If you hear a wind buffeting noise with any of the
windows open, lower all of the other windows
slightly or open the moonroof.

Close

Open

■

Opening the Windows with the Remote

1

Opening the Windows with the Remote

If you open the windows with the remote, the
moonroof will open automatically along with them.

Unlock

Button

137

uu

Windows

u

Opening/Closing the Power Windows

Co
ntrols

To open:

Unlock the driver’s door with the

key. Within 10 seconds of returning the key to
the central position, turn the key in the unlock
direction and hold it there.

To close:

Lock the driver’s door with the key.

Within 10 seconds of returning the key to the
central position, turn the key in the lock
direction and hold it there.

Release the key to stop the windows at the
desired position. If you want further
adjustment, repeat the same operation.

■

Opening/Closing the Windows with the Key

1

Opening/Closing the Windows with the Key

If you open/close the windows with the key, the
moonroof will open/close automatically along with
them.

Close

Open

138

Co
ntrols

Moonroof

Opening/Closing the Moonroof

You can operate the moonroof when the power mode is in ON. Use the switch in
the front of the ceiling to open and close the moonroof.

■

Automatic operation

To open:

Pull the switch back firmly.

To close:

Push the switch forward firmly.

The moonroof automatically opens or closes
all the way. To stop the moonroof midway,
pull or push the switch briefly.

■

Manual operation

To open:

Pull the switch back lightly, and

hold it until the desired position is reached.

To close:

Push the switch forward lightly, and

hold it until the desired position is reached.

■

Tilting the moonroof up

To tilt:

Push on the center of the moonroof

switch.

To close:

Push the switch forward firmly, then

release.

■

Using the Moonroof Switch

1

Moonroof

NOTICE

Opening the moonroof in below freezing
temperature or when it is covered with snow or ice
can damage the moonroof panel or motor.

The moonroof can be operated for up to 10 minutes
after you set the power mode to VEHICLE OFF
(LOCK).
Opening either front door cancels this function.

When resistance is detected, the auto reverse
function causes the moonroof to change directions,
then stop. Auto reverse stops sensing when the
moonroof is almost closed to ensure that it fully
closes. Make sure that all objects, including fingers,
are clear of the moonroof.

You can use the remote transmitter or the key to
operate the moonroof.

2

Opening the Windows with the Remote

P. 136

2

Opening/Closing the Windows with the
Key

P. 137

3

WARNING

Opening or closing the moonroof on
someone's hands or fingers can cause
serious injury.

Make sure all hands and fingers are clear of
the moonroof before opening or closing it.

Close

Open

Tilt

139

Continued

Co
ntrols

Operating the Switches Around the Steering Wheel

ENGINE START/STOP Button

■

Changing the Power Mode

1

ENGINE START/STOP Button

ENGINE START/STOP Button Operating Range

You can start the engine when the keyless access
remote is inside the vehicle.
The engine may also run if the keyless access remote
is close to the door or window, even if it is outside the
vehicle.

ON mode:
The

ENGINE START/STOP

button is on (in red), if the

engine is running.

If the battery of the keyless access remote is getting
low, the engine may not start when you press the

ENGINE START/STOP

button. If the engine does not

start, refer to the following link.

2

If the Keyless Access Remote Battery is
Weak

P. 584

Do not leave the power mode in ACCESSORY or ON
when you get out.

Operating Range

VEHICLE OFF (LOCK)

The button is off.
The power to all electrical components is turned off.

Press the button without the

transmission in

(

P

.

Press the button with the

transmission in

(

P

.

Press the button.

Without pressing the brake pedal

ACCESSORY

The button blinks (in red).
Operate the audio system and other accessories in

this position.

ON

The button blinks (in red).
All electrical components can be used.

Put the transmission into

(

P

.

140

uu

Operating the Switches Around the Steering Wheel

u

ENGINE START/STOP Button

Co
ntrols

If you leave the vehicle for 30 to 60 minutes with the transmission in

(

P

and the

power mode in ACCESSORY, the vehicle automatically goes into the mode to
VEHICLE OFF (LOCK) to avoid draining the battery.

If you open the driver’s door when the power mode is set to ACCESSORY, a warning
beep sounds.

■

Automatic Power Off

■

Power Mode Reminder

141

uu

Operating the Switches Around the Steering Wheel

u

ENGINE START/STOP Button

Co
ntrols

When the power mode is set to any mode
other than OFF and you remove the keyless
access remote from the vehicle and shut the
door, an alarm will sound. If the alarm
continues to sound, place the keyless access
remote in another location.

■

When the power mode is in
ACCESSORY

The alarm will sound from outside the vehicle.

■

When the power mode is in ON

An alarm will sound both inside and outside
the vehicle. In addition, a warning indicator
will appear on the instrument panel.

■

Keyless Access Remote Reminder

1

Keyless Access Remote Reminder

When the keyless access remote is within the
system’s operational range, and the driver’s door is
closed, the warning function cancels.

If the keyless access remote is taken out of the vehicle
after the engine has been started, you can no longer
change the

ENGINE START/STOP

button mode or

restart the engine. Always make sure if the remote is
in your vehicle when you operate the

ENGINE

START/STOP

button.

Removing the keyless access remote from the vehicle
through a window does not activate the warning
buzzer.

Do not put the keyless access remote on the
dashboard or in the glove box. It may cause the
warning buzzer to go off. Under some other
conditions that can prevent the vehicle from locating
the remote, the warning buzzer may also go off even
if the remote is within the system’s operational
range.