Chevrolet Silverado / GMC Sierra. Manual — part 2986
Fig. 68: Applying Urethane Adhesive Between Window & Pinch-Weld
Courtesy of GENERAL MOTORS CORP.
6. Apply a small bead of urethane adhesive (2) between the window (1) and the pinch-weld.
Fig. 69: Identifying Reveal Molding
Courtesy of GENERAL MOTORS CORP.
7. Reinstall the window reveal molding.
1. Start from the loose area and hand-press the reveal molding into place over the edge of
the window.
2. Run warm water over the reveal molding in order to speed the setup time of the
urethane adhesive.
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
3. Tape should be applied in order to retain the reveal molding to the window. This will
maintain a flush fit with the body.
4. The tape is to be removed after 6 hours.
FRONT SIDE DOOR WINDOW AND REAR SIDE DOOR WINDOW SWITCH REPLACEMENT
(WITH DL8 AND WITHOUT SLT)
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Fig. 70: View Of Front Side Door Window, Rear Side Door Window Switch & Bezel
Courtesy of GENERAL MOTORS CORP.
REAR SIDE DOOR WINDOW SWITCH REPLACEMENT (CREW CAB)
Callout
Component Name
1
Front Side Door Window Switch Bezel
Refer to Front Door Switch Bezel Replacement .
2
Front Side Door Window and Rear Side Door Window Switch
Procedure:
Use a small flat bladed tool to aid in the removal of the switch from the bezel.
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст