Chevrolet Silverado / GMC Sierra. Manual — part 2985
4. Install the rear sliding window regulator and cables (2) to the motor/module.
5. Install the bolt (1) to the rear sliding window regulator and cables (2).
Tighten: Tighten bolt to 11 N.m (97 lb in).
6. Install the rear sliding window lower garnish molding. Refer to Rear Window Lower
Garnish Molding Replacement (Regular Cab) or Rear Window Lower Garnish
Molding Replacement (Ext Cab/Crew Cab w/A48) or Rear Window Lower Garnish
Molding Replacement (Ext Cab/Crew Cab w/o A48) .
7. Inspect the rear sliding window for proper operation.
DOOR WINDOW REGULATOR HANDLE REPLACEMENT
Fig. 65: View Of Side Door Window Regulator Handle Assembly & Retainer Clip
Courtesy of GENERAL MOTORS CORP.
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
STATIONARY WINDOW REVEAL MOLDING REPAIR
Removal Procedure
Fig. 66: Identifying Reveal Molding
Courtesy of GENERAL MOTORS CORP.
Callout
Component Name
1
Side Door Window Regulator Handle Retainer Clip
2
Side Door Window Regulator Handle Assembly
Tip: Use the J 9886-01 Door Handle Clip Remover to remove the crank
handle. See Special Tools.
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
1. Lift up on the loose area of the reveal molding.
2. Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of
isopropyl alcohol and water by volume on a dampened lint-free cloth.
Installation Procedure
1. Verify all primers and urethane adhesive are within expiration dates.
Fig. 67: Applying Glass Prep
Courtesy of GENERAL MOTORS CORP.
CAUTION: Refer to GLASS AND SHEET METAL HANDLING
CAUTION .
IMPORTANT: The window reveal molding fills the cavity between the body
and window. If the reveal molding is stretched or damaged, it
cannot be reused and it must be replaced.
CAUTION: Refer to Window Retention Caution .
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
2. Use a new dauber in order to apply glass prep, clear #1, to the channel area approximately
13 mm (1/2 in) to the upper edge of the window.
3. Wipe the glass primed area immediately with a clean lint-free cloth.
4. Shake the glass primer, black #2, for at least 1 minute.
5. Use a new dauber in order to apply glass primer, black #2, to the top edge of the window.
IMPORTANT: Use care when applying the prep, clear #1, to the window.
This primer dries almost instantly, and may stain the viewing
area of the window if not applied evenly.
2008 Chevrolet Silverado 1500
2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado,
Sierra & Silverado
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст