DAF 95XF. Manual — part 524
THREADED CONNECTIONS
Threaded connections
1-2
The following applies to all threaded
connections (for both new and used
vehicles):
-
in the case of standard connections, apply
the lubricant before fitting, and retighten in
accordance with the standard for dipped
bolts;
-
in the case of special connections, apply
the lubricant before fitting, and retighten in
accordance with the values specified in the
instructions.
The instructions for using a lubricant also apply
to new bolts supplied from the warehouse. Dry
threaded connections are not permitted because
of their highly variable friction coefficients.
Please consult the workshop
manual for the specified tightening
torque.
2
200424
Contents
COOLANT, OIL AND LUBRICANTS
1
CONTENTS
Page
Date
1.
SPECIFICATIONS
1-1
200424
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
1.1
General
1-1
200424
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
3
200424
COOLANT, OIL AND LUBRICANTS
Contents
2
3
200424
Specifications
COOLANT, OIL AND LUBRICANTS
1-1
1. SPECIFICATIONS
1.1 GENERAL
IN ORDER TO SATISFY THE WARRANTY
CONDITIONS AND GUARANTEE THE
LIFESPAN, SAFETY AND RELIABILITY OF
DAF PRODUCTS, IT IS OF THE UTMOST
IMPORTANCE THAT THE CORRECT FLUIDS,
OIL AND LUBRICANTS, COOLANT AND
FUEL ARE USED, AND THAT THE
REQUIRED REPLACEMENT INTERVALS
ARE OBSERVED.
Additives to lubricants, engine coolant and fuel -
of whatever type - must not be used except in
those circumstances prescribed by DAF.
Always follow the safety instructions below as
well as the instructions that are supplied with the
product.
Ask your lubricant and fuel supplier(s) whether
the products supplied comply with DAF
specifications.
DAF is not liable for damage or
problems in the following
instances: :
1. If oil of a quality inferior to that
specified is used.
2. If oil of a different viscosity than
specified is used.
3. If the replacement interval is
exceeded.
4. If fuel, lubricants or coolants
that do not meet the
requirements specified by DAF
are used.
3
200424
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст