DAF 95XF. Manual — part 206

©

200438

3-1

System inspection with DAVIE XD

EBS-2

DAVIE XD diagnostics manual

12

3. SYSTEM INSPECTION WITH DAVIE XD

3.1 GENERAL

If the vehicle has been modified and the

configuration changed, the electronic unit may

have to be re-programmed.

EBS-2

3-2

©

200438

System inspection with DAVIE XD

12

DAVIE XD diagnostics manual

3.2 VSC CALIBRATION

Using DAVIE, the VSC calibration must be

activated after the following operations:

-

replacing EBS-2 electronic unit

-

replacing VSC module

-

changes to parameter setting

The slip indicator on the instrument panel will be

activated while the VSC is being calibrated and

will go off when VSC calibration has been

successfully completed.

When VSC calibration is active, a calibration error

code can also be displayed by means of DAVIE.

Note:

-

The slip indicator is not activated during VSC

calibration on vehicles with production date

<2004-21. On these vehicles the fact that the

calibration error code is no longer present on

DAVIE indicates that calibration has been

successfully completed.

-

VSC calibration takes place automatically

and is completed when the vehicle has been

driven a total of approximately 250 m in the

straight-ahead position. This distance of 250

m in the straight-ahead position does not

have to be covered in one go: the steering

wheel can be turned from time to time.

-

VSC control functions cannot be activated

while calibration is being carried out.

©

200438

1

Contents

ECAS-3

DAVIE XD diagnostics manual

13

13 ECAS-3

CONTENTS

Page

Date

1.

ECAS-3 FAULT CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 . . . . . 200438
1.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 . . . . . 200438

1.2

Explanatory notes to ECAS-3 fault codes . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 . . . . . 200438

2.

ECAS-3 CUSTOMER PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 . . . . . 200438
2.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 . . . . . 200438

2.2

Explanatory notes to ECAS-3 customer parameters . . . . . . . . . . . . . . . . . 2-2 . . . . . 200438

3.

SYSTEM INSPECTION WITH DAVIE XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 . . . . . 200438
3.1

Calibrating the sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 . . . . . 200438

3.2

Inspection of height sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 . . . . . 200438

ECAS-3

2

©

200438

Contents

13

DAVIE XD diagnostics manual