DAF 95XF. Manual — part 175
©
200438
2-3
System inspection with DAVIE XD
AS TRONIC
DAVIE XD diagnostics manual
3
2.3 'CLUTCH ACTUATOR' MENU
This test provides an indication of the
performance of the clutch/clutch actuator, and
can best be carried out on a moving vehicle.
The "absolute clutch stroke" is the clutch stroke
from a fully closed to a fully opened position,
expressed in mm.
The "relative clutch stroke" indicates the position
of the clutch in % instead of mm.
The "clutch status" indicates whether at that
moment the clutch is "opened" or "closed" or
whether the clutch "slips".
The above measurements are closely connected.
For instance, the clutch position "closed" is
expressed in mm and %.
A closed clutch gives a relative clutch stroke of
100% in a position between 37 and 60 mm. An
opened clutch gives a relative clutch stroke of
about 0% in a position between 18 and 40 mm.
The clutch position sensor in the clutch actuator
measures the distance from a fully closed to a
fully opened clutch.
Example:
Clutch position/stroke:
fully closed (100%) = 37 mm
fully opened (approx. 0%) = 18 mm
Difference (clutch stroke) = approx. 19 mm
The position of clutch operation components
changes during the service life of the clutch plate.
For this reason the clutch stroke of approx.
19 mm will move along the "operating range" of
the clutch actuator. This is visible by the changing
clutch position (in mm) of the opened and closed
clutch.
The "absolute change-over" is the point at which
the clutch "engages"; depending on tolerances
and wear this point is between 12 and 45 mm.
If the accelerator pedal is not operated, the "low
idling switch" is active.
A number of situations are shown by way of
example:
Neutral
In neutral the clutch is closed; therefore "engine
speed in" and "input shaft speed" have to be
virtually equal.
With a closed clutch the "relative clutch stroke" is
100%; also, the "clutch status" indicates that the
clutch is closed.
If the accelerator pedal is not operated, the "low
idling switch" is active.
AS TRONIC
2-4
©
200438
System inspection with DAVIE XD
3
DAVIE XD diagnostics manual
Selecting D or R
If D or R is selected, the clutch will open, which is
indicated by the "clutch status" and the "input
shaft speed" which has become 0 rpm.
With an opened clutch the "relative clutch stroke"
is approx. 0%.
If the accelerator pedal is not operated, the "low
idling switch" is still active.
When driving away, the clutch will close and the
engine and input shaft speeds will be virtually
equal.
At the same time the "low idling switch" status will
change to not active.
Selecting Manoeuvering R or Manoeuvering D
Selection of Manoeuvering R or Manoeuvering D
gives the same result as selection of D and R,
until the accelerator pedal is depressed.
The "low idling switch" status changes to not
active and the "clutch status" indicates that the
clutch slips.
Also, the "relative clutch stroke" indicates that the
clutch does not close completely; the stroke will
be between 30 and 50%, depending on the
resistance that has to be overcome.
©
200438
1
Contents
VIC
DAVIE XD diagnostics manual
4
4 VIC
CONTENTS
Page
Date
Explanatory notes to VIC customer parameters, restricted version. . . . . . 2-2 . . . . . 200438
Explanatory notes to VIC customer parameters, elaborate version . . . . . 2-6 . . . . . 200438
VIC
2
©
200438
Contents
4
DAVIE XD diagnostics manual
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст