DAF 95XF. Manual — part 792
1
TECHNICAL DATA
Cab suspension
2-2
2.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques. Any other threaded connections that
are not specified must therefore be tightened to
the tightening torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed, unless stated otherwise.
0
ᓻ 200345
0
1
Cab suspension
TECHNICAL DATA
2-3
Cab suspension
K100796
A
E
B
D
C
K100797
F
E
G
H
J
K
Position
Description
Tightening torque
A
Rear bracket attachment bolt
M16 x 110
260
ᐔ 20 Nm + 90_ angular displacement
B
Rear horizontal shock absorber
attachment bolt M14 x 65
170
ᐔ 15 Nm
C
Rear horizontal shock absorber
attachment bolt M14 x 110
170
ᐔ 15 Nm
D
Rear shock absorber attachment
bolt M14 x 65
170
ᐔ 15 Nm
E
Self--locking nut M14 for front and
rear spring element
50 Nm
F
Front right--hand side bracket
fastening bolt M16 x 50
260
ᐔ 20 Nm
G
Front right--hand side bracket
fastening bolt M16 x 70
260
ᐔ 20 Nm
H
Front right--hand side bracket
fastening bolt M16 x 100
260
ᐔ 20 Nm
J
Vibration damper locating bolt
M18 x 145
360
ᐔ 30 Nm
(1)
K
Front left--hand side bracket
fastening bolt M14 x 70
170
ᐔ 15 Nm
(1)
Secure with Loctite 243
ᓻ 200345
1
TECHNICAL DATA
Cab suspension
2-4
0
ᓻ 200345
0
1
Cab tilting gear
TECHNICAL DATA
3-1
3. CAB TILTING GEAR
3.1 GENERAL
Lifting cylinder
Nominal pressure
400 bar
Cab tilting pump
Nominal pressure
400 bar
Displacement
4 cm
3
Pressure--limiting valve
400 + 50 bar
Level check/filler plug pressure--relief valve
2.5 bar
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques. Any other threaded connections that
are not specified must therefore be tightened to
the tightening torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed, unless stated otherwise.
Lifting cylinder
Lifting cylinder cab support attachment bolts
260 Nm
Chassis support attachment bolt
60 Nm
Non--return valve seat
40 - 45 Nm
3.3 FILLING CAPACITIES
Cab tilting pump
Capacity of reservoir
625 cm
3
ᓻ 200345
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст