DAF LF45, LF55 Series. Manual — part 218
©
200508
4-3
ZF 6S-850 gearbox
TECHNICAL DATA
ΛΦ45/55 series
3
0
4.3 FILLING CAPACITIES
Gearbox type
Filling amounts at oil change
(litres)
First filling, e.g. on repair
(litres)
ZF 6S-850
7.5
7.5
TECHNICAL DATA
4-4
©
200508
ZF 6S-850 gearbox
0
ΛΦ45/55 series
3
©
200508
5-1
Eaton FS/6309A gearbox
TECHNICAL DATA
ΛΦ45/55 series
3
0
5. EATON FS/6309A GEARBOX
5.1 GENERAL
Gearbox type
Each gearbox has a type plate attached to it,
indicating the type of gearbox. You can also find
this data on the identity card for the vehicle
concerned.
Eaton gearbox type plate
The Eaton specification number is unique to each
customer and gives detailed information on the
development level of the gearbox. The number
must be quoted whenever replacement parts are
ordered.
Secondary shaft pre-load
Sealant
Filter/governor
V300378
2
3
4
1
5
1.
Type of gearbox
2.
Specification no. Eaton
3.
DAF article Eaton code
4.
Serial no. Eaton
5.
Production date code
Input shaft play of adjusting rings:
Colour coding:
3.70 mm
Red, green, white
3.75 mm
Yellow, green, blue
3.80 mm
Blue, green, white
3.85 mm
Red, green, yellow
3.90 mm
Green, green, white
3.95 mm
Red, green, red
New bearings
0.075 - 0.125 mm
Original bearings
0.000 - 0.050 mm
Gearbox housing front cover contact surfaces
Loctite 518
Input shaft
Lithium-based grease, class NLGI 3
Governed pressure
5.3 - 5.7 bar
TECHNICAL DATA
5-2
©
200508
Eaton FS/6309A gearbox
0
ΛΦ45/55 series
3
5.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques.
The other threaded connections not specified
must therefore be tightened to the torque
mentioned in the overview of standard tightening
torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Gearbox
Drive flange
Gearbox front cover
Selector shaft housing
Filter/governor
Plugs
(1) Use new nut
(2) Use Loctite 243
Attachment bolts
60 Nm
M39 attachment nut
650 Nm
(1)
Drive flange oil seal housing attachment bolts
37 Nm
Attachment bolts
37 Nm
Selector shaft housing attachment bolts
37 Nm
(2)
M8 retaining cover attachment bolts
22 Nm
M8 shifting arm lock nut
25 Nm
M10 shifting arm lock nut
37 Nm
End cover attachment bolts
22 Nm
Bleeder
19 Nm
Bleed valve
22 Nm
M6 attachment bolts
13 Nm
Cover
25 Nm
Oil level check/filler plug
35 Nm
Drain plug
44 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст