DAF LF45, LF55 Series. Manual — part 662
©
200515
7-1
Lubrication
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΛΦ45/55 series
5
7. LUBRICATION
7.1 LUBRICATING ACCORDING TO Y-SERVICE LUBRICATION SCHEDULE
Note:
The lubricating points marked below with an (S)
indicate that the lubricating point is positioned on
both the left-hand and right-hand side of the
vehicle.
Lubricating stub axles (S), general
1.
To make sure that the grease can penetrate
adequately, the stub axles should be
lubricated in unloaded condition. The front
axle should therefore be completely jacked
up; make a complete steering movement
from left to right during greasing.
2.
Lubricate the stub axles until grease comes
out.
F36, F48 and F60 (S) front axles
1.
The F36 and F48 front axles have a grease
nipple on the top side and the underside. The
F60 front axle has a grease nipple only on
the underside.
S7 00 545
S7 00 591
S7 00 590
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
7-2
©
200515
Lubrication
5
ΛΦ45/55 series
152N (S) front axle
1.
The 152N front axle has a grease nipple on
the top side and underside.
G000189
©
200515
7-3
Lubrication
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΛΦ45/55 series
5
7.2 LUBRICATE ACCORDING TO X-SERVICE LUBRICATION SCHEDULE
Lubricating the selector rod
1.
Tilt the cab.
2.
Apply a thin, even layer of grease to the
indicated part.
Note:
The locking hook under the cab must not be
lubricated.
Lubricating the fifth wheel
3.
Lubricate the fifth wheel via the grease
nipple.
Lubricating the trailer coupling
4.
Lubricate the trailer coupling via the grease
nipple.
V3 00 380
G000192
G000188
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
7-4
©
200515
Lubrication
5
ΛΦ45/55 series
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст