DAF LF45, LF55 Series. Manual — part 237
©
200508
3-3
Inspection and adjustment
PNEUMATIC GEARBOX CONTROL
ΛΦ45/55 series
3
3
3.3 INSPECTION, DOWNSHIFT PROTECTION VALVE
Inspection without vehicle speed signal
1.
Make sure there is sufficient air pressure in
the brake system.
2.
Position the gear lever in neutral.
3.
Switch the vehicle ignition on.
4.
Use the range group operating switch on the
ball of the gear lever to select the lower
range. The range group should now switch to
the lower range.
5.
Switch the vehicle ignition off. The range
group should now automatically switch to the
higher range.
Inspection with the vehicle speed signal
1.
Make sure there is sufficient air pressure in
the brake system.
2.
Connect special tool DELSI
(DAF no. 0694941).
3.
Position the gear lever in neutral.
4.
Switch the vehicle ignition on.
5.
Use the range group operating switch on the
ball of the gear lever to select the lower
range. The range group should now switch to
the lower range.
V300425
PNEUMATIC GEARBOX CONTROL
3-4
©
200508
Inspection and adjustment
3
ΛΦ45/55 series
3
6.
Use DELSI to raise the simulated vehicle
speed slowly to approximately 40 km/h. As
the vehicle speed increases, the range group
should automatically switch to the higher
range.
7.
Use DELSI to decrease the simulated
vehicle speed slowly to approximately
0 km/h. As the vehicle speed decreases, the
range group should automatically switch to
the lower range.
V300426
©
200508
3-5
Inspection and adjustment
PNEUMATIC GEARBOX CONTROL
ΛΦ45/55 series
3
3
3.4 INSPECTION, FILTER/GOVERNOR
Inspection, filter/governor
1.
Remove the plug from the extra outlet (9)
and install a pressure gauge.
2.
Check the service pressure. See "Technical
data".
6
5
4
3
2
1
10
9
8
V300430
7
PNEUMATIC GEARBOX CONTROL
3-6
©
200508
Inspection and adjustment
3
ΛΦ45/55 series
3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст