DAF LF45, LF55 Series. Manual — part 460
©
200436
2-19
Inspection and adjustment
BRAKE SYSTEM AND COMPONENTS
ΛΦ45/55 series
6
4
2.13 INSPECTING BRAKE PADS, WABCO MODEL
With wheels fitted
No external wear indicators are fitted on these
models. The brake pad thickness must be
inspected by using a mirror and a lamp, if
necessary.
BRAKE SYSTEM AND COMPONENTS
2-20
©
200436
Inspection and adjustment
4
ΛΦ45/55 series
6
2.14 INSPECTING BRAKE PADS, KNORR MODEL
Inspecting Knorr SB7000 brake pads
With wheels fitted:
If the guide sleeve (4) no longer protrudes (C)
from the guide bush (6) but is flush with it (detail
A), the brake pad thickness must be inspected
with the wheels removed. See "Technical data".
C
1
4
6
R600481
A
©
200436
2-21
Inspection and adjustment
BRAKE SYSTEM AND COMPONENTS
ΛΦ45/55 series
6
4
Inspecting Knorr SN7000 brake pads
With wheels fitted
The brake pad thickness can be checked on the
basis of the position of the guide bush relative to
the rubber bush.
At maximum brake pad thickness the rubber
cover is stretched. Wear of the brake pads and
movement of the brake calliper along the guide
bushes will cause the rubber cover to roll up.
As soon as the transition from the ribbed section
of the rubber cover to the smooth section (A)
starts to roll inward, the brake pad thickness is to
be checked with the wheels removed. See
"Technical data".
A
A
A
R600730
BRAKE SYSTEM AND COMPONENTS
2-22
©
200436
Inspection and adjustment
4
ΛΦ45/55 series
6
2.15 INSPECTION, BRAKE DISCS
1.
Remove the wheels.
2.
Measure the disc thickness at different
points to find the thinnest measurement.
Compare the reading with the technical data.
See "Technical data".
3.
Check the brake discs for signs of wear. See
"Technical data".
Note:
The brake discs may be turned. See
"Technical data".
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст