DAF LF45, LF55 Series. Manual — part 564
0
8
LF45/55 series
Single rear axle 5.14
TECHNICAL DATA
3-1
3. SINGLE REAR AXLE 5.14
3.1 GENERAL
Wheel speed sensor
Anti-corrosion agent
Molykote P37
Differential-gear lock stud bolts
Differential-gear lock stud bolt locking
compound
Loctite 2701
Differential attachment stud bolts
Differential attachment stud bolt locking
compound
Loctite 2701
Differential attachment
Sealant between differential and axle housing
Loctite 518
Stub axle attachment
Sealant for stub axle flange mating surface
Loctite 518
Wheel bearing play
Wheel bearing axial play
0.05 - 0.20 mm
3.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of the standard
tightening torques. The other threaded
connections which are not stated must therefore
be tightened to the tightening torque stated in
the overview of standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that these bolts and nuts
are of exactly the same length and property
class as the ones removed - unless stated
otherwise -.
ᓻ 200313
8
TECHNICAL DATA
Single rear axle 5.14
LF45/55 series
3-2
Differential
Differential lock cover attachment bolts
20 Nm
(1)
Attachment bolts and nuts
90 Nm
(1)
Drive flange attachment nut (self-locking)
675 Nm
(2)
Drain plug
54 Nm
Wheel hub
Stub axle attachment nuts
82 Nm
Wheel-speed sensor holder attachment bolts
8 Nm
Lock nut
135 Nm
Level check/filler plug
27 Nm
Notes:
1.
Bolts to be treated with Loctite 572
2.
Only use a new nut
3.3 FILLING CAPACITIES
Differential
Filling capacity
approx. 4.0 litres
Hub
Filling capacity
0.25 litres
0
ᓻ 200313
0
8
LF45/55 series
Single rear axle 8.20
TECHNICAL DATA
4-1
4. SINGLE REAR AXLE 8.20
4.1 GENERAL
Wheel speed sensor
Anti-corrosion agent
Molykote P37
Differential-gear lock stud bolts
Differential-gear lock stud bolt locking
compound
Loctite 2701
Differential attachment stud bolts
Differential attachment stud bolt locking
compound
Loctite 2701
Differential attachment
Sealant between differential and axle housing
Loctite 518
Stub axle attachment
Sealant for stub axle flange mating surface
Loctite 518
Wheel bearing play
Wheel bearing axial play
0.05 - 0.20 mm
4.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of the standard
tightening torques. The other threaded
connections which are not stated must therefore
be tightened to the tightening torque stated in
the overview of standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that these bolts and nuts
are of exactly the same length and property
class as the ones removed - unless stated
otherwise -.
ᓻ 200313
8
TECHNICAL DATA
Single rear axle 8.20
LF45/55 series
4-2
Differential
Drive flange attachment nut (self-locking)
675 Nm
(1)
Differential lock cover attachment bolts
20 Nm
Attachment bolts/nuts
225 Nm
(2)
Drain plug
54 Nm
Wheel hub
Stub axle attachment nuts
82 Nm
Wheel-speed sensor holder attachment bolts
8 Nm
Lock nut
135 Nm
Level check/filler plug
27 Nm
Notes:
1.
Only use a new nut
2.
Bolts to be treated with Loctite 572
4.3 FILLING CAPACITIES
Differential
Filling capacity
approx. 8.0 litres
Hub
Filling capacity
0.25 litres
0
ᓻ 200313
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст