DAF LF45, LF55 Series. Manual — part 565
0
8
LF45/55 series
Single rear axle 10.20
TECHNICAL DATA
5-1
5. SINGLE REAR AXLE 10.20
5.1 GENERAL
Wheel hub
Before installing the wheel hub, axle journal
to be treated with
Gleitmo 805
Wheel speed sensor
Anti-corrosion agent
Molykote P37
Differential-gear lock stud bolts
Differential-gear lock stud bolt locking
compound
Loctite 2701
Differential attachment stud bolts
Differential attachment stud bolt locking
compound
Loctite 2701
Differential attachment
Sealant between differential and axle housing
Loctite 518
Stub axle attachment
Sealant for stub axle flange mating surface
Loctite 518
5.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of the standard
tightening torques. The other threaded
connections which are not stated must therefore
be tightened to the tightening torque stated in
the overview of standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that these bolts and nuts
are of exactly the same length and property
class as the ones removed - unless stated
otherwise -.
ᓻ 200313
8
TECHNICAL DATA
Single rear axle 10.20
LF45/55 series
5-2
Differential
Drive flange attachment nut (self-locking)
675 Nm
(1)
Differential lock cover attachment bolts
20 Nm
Attachment bolts/nuts
225 Nm
(2)
Drain plug
54 Nm
Wheel hub
-
1
st
phase
300 Nm
(1)
-
2
nd
phase
turn the hub 10 revolutions at a speed of
approx. 40 rpm
-
3
rd
phase
350 Nm
-
4
th
phase
turn the hub 10 revolutions at a speed of
approx. 40 rpm
-
5
th
phase
1100 Nm
Stub axle attachment bolts
260 Nm
Wheel-speed sensor holder attachment bolts
8 Nm
Notes:
1.
Only use a new nut
2.
Bolts to be treated with Loctite 572
5.3 FILLING CAPACITIES
Differential
Filling capacity
approx. 9.0 litres
0
ᓻ 200313
0
8
LF45/55 series
Single rear axle 10.26
TECHNICAL DATA
6-1
6. SINGLE REAR AXLE 10.26
6.1 GENERAL
Wheel hub
Before installing the wheel hub, axle journal to
be treated with
Gleitmo 805
Wheel speed sensor
Anti-corrosion agent
Molykote P37
Differential-gear lock stud bolts
Differential-gear lock stud bolt locking
compound
Loctite 2701
Differential attachment stud bolts
Differential attachment stud bolt locking
compound
Loctite 2701
Differential attachment
Sealant between differential and axle housing
Loctite 518
Stub axle attachment
Sealant for stub axle flange mating surface
Loctite 518
6.2 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening
torques stated in the overview of the standard
tightening torques. The other threaded
connections which are not stated must therefore
be tightened to the tightening torque stated in
the overview of standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that these bolts and nuts
are of exactly the same length and property
class as the ones removed - unless stated
otherwise.
ᓻ 200313
8
TECHNICAL DATA
Single rear axle 10.26
LF45/55 series
6-2
Differential
Drive flange attachment nut (self-locking)
1250 Nm
(1) / (3)
Differential lock cover attachment bolts
20 Nm
Attachment bolts/nuts
225 Nm
(2)
Drain plug
54 Nm
Wheel hub
-
1
st
phase
300 Nm
(1)
-
2
nd
phase
turn the hub 10 revolutions at a speed of
approx. 40 rpm
-
3
rd
phase
350 Nm
-
4
th
phase
turn the hub 10 revolutions at a speed of
approx. 40 rpm
-
5
th
phase
1100 Nm
Stub axle attachment bolts
260 Nm
Wheel-speed sensor holder attachment bolts
8 Nm
Notes:
1.
Only use a new nut
2.
Bolts to be treated with Loctite 572
3.
Secure with Loctite 262
6.3 FILLING CAPACITIES
Differential
Filling capacity
approx. 9.0 litres
0
ᓻ 200313
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст