DAF LF45, LF55 Series. Manual — part 37
ECAS-2
2
©
Contents
8
DAVIE XD diagnostics manual
©
1-1
ECAS-2 fault codes
ECAS-2
DAVIE XD diagnostics manual
8
1. ECAS-2 FAULT CODES
1.1 INTRODUCTION
If the electronic unit detects a system fault, this
fault is usually stored in the memory of the
electronic unit as a fault code.
Most system faults will also generate a warning.
ECAS-2
1-2
©
ECAS-2 fault codes
8
DAVIE XD diagnostics manual
1.2 EXPLANATORY NOTES TO ECAS-2 FAULT CODES
Fault code
Fault code description with possible cause
System response
01
Internal failure in ECAS-2 electronic unit due to:
-
incorrectly programmed parameter
-
No further system limitation
02
Internal failure in ECAS-2 electronic unit due to:
-
height sensor calibration data
-
No further system limitation
03
Internal failure in ECAS-2 electronic unit due to:
-
ROM memory fault
-
No further system limitation
04
Internal failure in ECAS-2 electronic unit due to:
-
Wabco data
-
No further system limitation
05
Internal failure in ECAS-2 electronic unit due to:
-
height sensor calibration data parameter
fault
-
No further system limitation
06
Internal failure in ECAS-2 electronic unit due to:
-
defective RAM memory
-
No further system limitation
08
Internal failure in ECAS-2 electronic unit due to:
-
pressure sensor calibration data
-
No further system limitation
09
Solenoid valve failure
Supply voltage fault on pin 1 of the ECU due to:
-
interrupted wire 1117
-
defective fuse (E051)
-
No rear axle chassis height control
-
Driving height is not reached
10
Rear axle height sensor failure, right
Supply voltage fault due to:
-
defective height sensor (F613)
-
interruption or short circuit to supply of
height sensors (F612 + F613) on pin 8 or
pin 25 of the ECU
-
interruption of earth connection of height
sensors (F612 + F613)
-
Driving height is not reached
-
Part chassis height control or none at all
-
Difference in height level on left and right
side
11
Rear axle height sensor failure, right
Supply voltage fault due to:
-
defective height sensor (F612)
-
interruption or short circuit to supply of
height sensors (F612 + F613) on pin 8 or
pin 25 of the ECU
-
interruption of earth connection of height
sensors (F612 + F613)
-
Driving height is not reached
-
Difference in height level on left and right
side
-
Part chassis height control or none at all
12
Front axle height sensor failure
Supply voltage fault due to:
-
defective height sensor (F614)
-
interruption or short circuit to supply of
height sensor (F614) on pin 26 of the ECU
-
interruption of earth connection of height
sensor (F614)
-
Driving height is not reached
-
Part chassis height control or none at all
-
No chassis height control, front axle
16
Short circuit to supply of driven axle pressure
sensor on pin 5 or pin 6 of the ECU
17
Short circuit to supply of driven axle pressure
sensor on pin 5 or pin 6 of the ECU
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст