DAF CF65, CF75, CF85 Series . Manual — part 1091
©
200448
2-3
Removal and installation
STABILISERS AND TORQUE RODS
ΧΦ65/75/85 series
9
4
2.2 REMOVAL AND INSTALLATION, LEAF-SPRUNG REAR AXLE STABILISER
Removing leaf-sprung rear axle stabiliser
1.
Remove the brackets (5) and (11).
2.
Remove the attachment bolts (12).
3.
Remove the stabiliser bar (10) from under
the vehicle.
4.
Remove the bearing bushes (9) from the
stabiliser bar (10).
5.
Remove the circlip (7) with the washer (6)
and remove the bearing bush (4) from the
axle (3).
Installing leaf-sprung rear axle stabiliser
1.
Check the condition of the silentblock (14)
and the bearing bushes (4) and (9).
2.
Fit the bearing bushes (4), using new
circlips (7).
3.
Fit the bearing bushes (9) to the stabiliser
bar (10).
C9 00 425
11
1
3
4
6
7
9
8
13
15
12
16
10
2
5
14
STABILISERS AND TORQUE RODS
2-4
©
200448
Removal and installation
4
ΧΦ65/75/85 series
9
4.
Turn the bearing bushes (4) and (9) into the
indicated position.
5.
Fit the brackets (5) and (11). Fit the
attachment bolts (8) with the heads facing
towards the front of the vehicle and tighten
the bolts (8) to the specified torque, see
"Technical data".
6.
Fit the attachment bolts (12) with the heads
facing towards the chassis.
C9 00 310
4
9
©
200448
2-5
Removal and installation
STABILISERS AND TORQUE RODS
ΧΦ65/75/85 series
9
4
2.3 REMOVAL AND INSTALLATION, STABILISER OF LEAF-SPRUNG TRAILING
AXLE AND PARABOLIC LEAF-SPRUNG TANDEM AXLE
Removing stabiliser of leaf-sprung trailing
axle and parabolic leaf-sprung tandem axle
1.
Remove the brackets (5) and (11).
2.
Remove the attachment bolts (12).
3.
Remove the stabiliser bar (10) from under
the vehicle.
4.
Remove the bearing bushes (9) from the
stabiliser bar (10).
5.
Remove the circlip (7) with the washer (6)
and remove the bearing bush (4) from the
axle (3).
Installing stabiliser of leaf-sprung trailing axle
and parabolic leaf-sprung tandem axle
1.
Check the condition of the silentblock (14)
and the bearing bushes (4) and (9).
2.
Fit the bearing bushes (4), using new
circlips (7).
3.
Fit the bearing bushes (9) to the stabiliser
bar (10).
C9 00 426
11
1
3
4
6
7
9
13
8
15
12
16
10
2
5
14
STABILISERS AND TORQUE RODS
2-6
©
200448
Removal and installation
4
ΧΦ65/75/85 series
9
4.
Turn the bearing bushes (4) and (9) into the
indicated position.
5.
Fit the brackets (5) and (11). Fit the
attachment bolts (8) with the heads facing
towards the rear of the vehicle and tighten
the bolts (8) to the specified torque, see
"Technical data".
6.
Fit the attachment bolts (12) with the heads
facing towards the chassis.
C9 00 360
4
9
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст