DAF CF65, CF75, CF85 Series . Manual — part 938
©
200423
2-3
Steering box
TECHNICAL DATA
ΧΦ65/75/85 series
7
0
2.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
A.
Steering wheel attachment nut
65 Nm
B.
Bolts for attaching the steering bracket to the
chassis
260 Nm + 60
angular displacement
C.
Bolt, steering column universal joint
56 Nm
(1)
D.
Bolts for attaching the steering box to the
steering bracket
520 Nm + 90
angular displacement
(2)
E.
Pitman arm attachment nut
900 Nm
F.
Right-angle transmission bolts
65 Nm
G.
Pressure-limiting valve plug
41 Nm
M
I
H
G
F
E
D
C
B
L
K
S7 00 716
A
TECHNICAL DATA
2-4
©
200423
Steering box
0
ΧΦ65/75/85 series
7
(1) Fit new original locating bolt and self-locking nut.
(2) Only fit new attachment bolts.
(3) Fit new self-locking nut.
(4) Tighten until the split pin fits (max. 60
). It is not allowed to fit a self-locking nut instead of a castle nut.
(5) Check the ball end thread for damage before fitting a new self-locking nut.
To do so, hand-tighten a non-self-locking nut on the ball joint to be checked.
If the new nut cannot be fully hand-screwed onto the entire thread, the ball end must be replaced.
Fit new self-locking nut. Apply Loctite 243 to the nut.
Fitting a new self-locking nut to a
ball end with a damaged thread may
lead to dangerous situations.
H.
Steering box side cover attachment bolts
240 Nm
Tightening sequence of attachment bolts on
the steering box side cover. See illustration.
I.
Lock nut for pressure point adjusting bolt
70 Nm
K.
Lock nut of wheel deflection limiting valve
adjusting bolt
55 Nm
L.
Attachment bolt, steering rod clamping
bracket
-
if M10
47 Nm
(3)
-
if M12
80 Nm
(3)
M.
Steering rod nut
-
if M20 castle nut
225 Nm
(4)
-
if M24 castle nut
285 Nm
(4)
-
if self-locking M20 nut
225 Nm
(5)
-
if self-locking M24 nut
285 Nm
(5)
1
8
6
4
2
3
5
7
S7 00 043
}
A
B
P2
P1
R2
R1
C1
C2
S7 00 409
A. Output indicator circuit 1
50 Nm
B. Output indicator circuit 2
(banjo bolt)
50 Nm
©
200423
3-1
Steering pump
TECHNICAL DATA
ΧΦ65/75/85 series
7
0
3. STEERING PUMP
3.1 GENERAL
Main steering pump
Emergency steering pump
Type
vane pump
Maximum pressure
see steering box type plate
(Pump is not equipped with pressure limiting
valve.)
Type:
VT72A
85 series, FAX model
VT77
75 and 85 series
LF77
75 and 85 series FAN model
ZF 7685
65 series
Type
radial plunger pump
Type
ZF 8604
Maximum pressure
see steering box type plate
Setting of peak pressure limiting valve
200 bar
Output of emergency steering pump at a steering
oil temperature of 50
C and a pressure of 50 bar
16 l/min.
TECHNICAL DATA
3-2
©
200423
Steering pump
0
ΧΦ65/75/85 series
7
3.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Steering pump LUK VT72A
Steering pump LUK VT77 and LF77
(1) Apply Loctite 243 to the nut.
Steering pump ZF 7685
Emergency steering pump
(1) Apply Loctite 243 to the nut.
Pipe connection in the pump, delivery side
50 Nm
Pipe connection in the pump, intake side
100 Nm
Flow control valve plug
80 Nm
Attachment bolts, steering pump
60 Nm
Drive sprocket attachment nut
80 Nm
(1)
Pipe connection in the pump, delivery side
40 Nm
Pipe connection in the pump, intake side
90 Nm
Flow control valve plug
80 Nm
Attachment bolts, steering pump
60 Nm
Pipe connection in the pump, delivery side
50 Nm
Pipe connection in the pump, intake side
75 Nm
Flow control valve plug
65 Nm
Attachment bolts, steering pump
60 Nm
Emergency steering pump attachment bolts
80 Nm
(1)
Drive sprocket attachment nut
60 Nm
(1)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст