DAF CF65, CF75, CF85 Series . Manual — part 1145
©
200423
2-5
Gearbox
TECHNICAL DATA
ΧΦ75 series
0
2.3 FILLING CAPACITIES
ZF gearboxes
ZF 8S-109
ZF 9S-109
ZF 16S-109
ZF 8S-151
ZF 16S-151
ZF 8S-109 with integrated retarder
ZF 9S-109 with integrated retarder
ZF 16S-109 with integrated retarder
ZF 8S-151 with integrated retarder
ZF 16S-151 with integrated retarder
Filling capacity
approx. 9 litres
Filling capacity
approx. 8 litres
Filling capacity
approx. 9 litres
Filling capacity
approx. 11 litres
Filling capacity
approx. 11 litres
Filling capacity
approx. 12.5 litres
Filling capacity
approx. 12 litres
Filling capacity
approx. 12.5 litres
Filling capacity
approx. 11 litres
Filling capacity
approx. 11 litres
TECHNICAL DATA
2-6
©
200423
Gearbox
0
ΧΦ75 series
ZF AS Tronic gearboxes
ZF 12 AS 1930/2330
ZF 12 AS 2540
ZF 12 AS 1931/2331 with integrated retarder
ZF 12 AS 2541 with integrated retarder
Allison gearboxes
MD3060P, M3066P, M3560P
MD3060P
Filling capacity
approx. 11 litres
Filling capacity
approx. 12 litres
Filling capacity
approx. 12 litres
Filling capacity
approx. 13 litres
Fill capacity 4" oil sump
approx. 20 litres
Fill capacity 2" oil sump
approx. 18 litres
©
200423
3-1
Rear axle
TECHNICAL DATA
ΧΦ75 series
0
3. REAR AXLE
3.1 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
M24 U-bolt nut, property class 8
(1) Evenly tighten the two U-bolt nuts alternately.
M24 U-bolt nut, property class 10
(1) Evenly tighten the two U-bolt nuts alternately.
M22 U-bolt nut, property class 10 (leading rear
axle)
(1) Evenly tighten the two U-bolt nuts alternately.
Filler and drain plugs/hub plugs (Torx wrench)
85 Nm
If flanged nut
740 Nm
≥ 55 Nm
If yellow zinc plated hexagonal nut
615 Nm
≥ 50 Nm
If flanged nut
880 Nm
≥ 60 Nm
If yellow zinc plated hexagonal nut
615 Nm
≥ 50 Nm
If flanged nut
700 Nm
≥ 50 Nm
If yellow zinc plated hexagonal nut
530 Nm
≥ 40 Nm
TECHNICAL DATA
3-2
©
200423
Rear axle
0
ΧΦ75 series
3.2 FILLING CAPACITIES
Differential
Filling quantity with
minimum caster
Filling quantity with
maximum caster
1339 axle
approx. 18.0 litres
approx. 20.0 litres
1347 axle
approx. 21.5 litres
approx. 23.5 litres
1354 axle
approx. 16.5 litres
approx. 16.5 litres
1355(T) axle (1
st
axle)
approx. 13.0 litres
approx. 18.0 litres
1355(T) axle (2
nd
axle)
approx. 11.5 litres
approx. 13.0 litres
1132(T) axle (1
st
axle)
approx. 17.0 litres
approx. 25.5 litres
1132(T) axle (2
nd
axle)
approx. 15.0 litres
approx. 17.5 litres
Wheel hub
Filling capacity per hub
1354 axle
approx. 2 litres
1355(T) axle
approx. 2 litres
1132(T) axle
approx. 0.8 litres
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст