DAF CF65, CF75, CF85 Series . Manual — part 1114
©
200518
1-1
Engine, cooling system and fuel system
TECHNICAL DATA
ΧΦ65/65 (II) series
0
1. ENGINE, COOLING SYSTEM AND FUEL SYSTEM
1.1 GENERAL
1.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections which
are not stated must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
Valve clearance
Inspection dimension, cold valve clearance
Inlet
0.15 - 0.40 mm
Exhaust
0.40 - 0.75 mm
Setting dimension, cold valve clearance
Inlet
0.25 mm
Exhaust
0.50 mm
Lubrication system
Oil drain plug
60 Nm
Valve cover
Valve cover attachment bolts
10 Nm
TECHNICAL DATA
1-2
©
200518
Engine, cooling system and fuel system
0
ΧΦ65/65 (II) series
1.3 FILLING CAPACITIES
Lubrication system
CF 65 cooling system
CF65 (II) cooling system
Total capacity (including oil cooler and oil filter)
approx. 19.5 litres
Sump capacity, maximum level
approx. 17.5 litres
Sump capacity, minimum level
approx. 15.4 litres
Cooling system
approx. 26 litres
With Allison gearbox
approx. 40 litres
Cooling system
approx. 23 litres
©
200518
2-1
Steering gear and brake system
TECHNICAL DATA
ΧΦ65/65 (II) series
0
2. STEERING GEAR AND BRAKE SYSTEM
2.1 GENERAL
2.2 TIGHTENING TORQUES
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
(1) Fit new original attachment bolt and self-locking nut.
Maximum steering ball joint axial clearance
1.5 mm
Bolt, steering column universal joint
56 Nm
TECHNICAL DATA
2-2
©
200518
Steering gear and brake system
0
ΧΦ65/65 (II) series
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст