DAF CF65, CF75, CF85 Series . Manual — part 1147
©
200423
6-1
Front axle
TECHNICAL DATA
ΧΦ75 series
0
6. FRONT AXLE
6.1 TIGHTENING TORQUES
The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.
U-bolt nut M20, property class 10
(1) Evenly tighten the two U-bolt nuts alternately.
M22 U-bolt nut, property class 10 (leading rear
axle)
(1) Evenly tighten the two U-bolt nuts alternately.
If flanged nut
450 Nm
≥ 40 Nm
If yellow zinc plated hexagonal nut
400 Nm
≥ 40 Nm
If flanged nut
700 Nm
≥ 50 Nm
If yellow zinc plated hexagonal nut
530 Nm
≥ 40 Nm
TECHNICAL DATA
6-2
©
200423
Front axle
0
ΧΦ75 series
©
200423
1
Contents
THREADED CONNECTIONS
ΧΦ75 series
2
2 Threaded connections
CONTENTS
Page
Date
THREADED CONNECTIONS
2
©
200423
Contents
2
ΧΦ75 series
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст