DAF CF65, CF75, CF85 Series . Manual — part 1182

©

200423

5-1

Steering gear

TECHNICAL DATA

ΧΦ85 series

0

5. STEERING GEAR

5.1 GENERAL

Maximum steering ball joint axial clearance

1.5 mm

TECHNICAL DATA

5-2

©

200423

Steering gear

0

ΧΦ85 series

5.2 TIGHTENING TORQUES

Steering gear

The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.

When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.

Note:
-

The two plugs are interchangeable.

(1) Fit new original attachment bolt and nut.

A

S7 00 906

Filter plug without flange (A),
fluid flow control valve block
of EMAS system

125 Nm

≥ 5 Nm

B

S7 00 907

Filter plug with flange (B),
fluid flow control valve block
of EMAS system

270 Nm

≥ 20 Nm

Attachment bolt, steering column universal joint

54 Nm + 4 Nm

(1)

©

200423

6-1

Front axle

TECHNICAL DATA

ΧΦ85 series

0

6. FRONT AXLE

6.1 TIGHTENING TORQUES

The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.

When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.

U-bolt nut M20, property class 10

(1) Evenly tighten the two U-bolt nuts alternately.

M22 U-bolt nut, property class 10
(leading rear axle)

(1) Evenly tighten the two U-bolt nuts alternately.

If flanged nut

450 Nm

≥ 40 Nm

(1)

If yellow zinc plated hexagonal nut

400 Nm

≥ 40 Nm

(1)

If flanged nut

700 Nm

≥ 50 Nm

(1)

If yellow zinc plated hexagonal nut

530 Nm

≥ 40 Nm

(1)

TECHNICAL DATA

6-2

©

200423

Front axle

0

ΧΦ85 series