DAF CF65, CF75, CF85 Series . Manual — part 1181

©

200423

3-1

Rear axle

TECHNICAL DATA

ΧΦ85 series

0

3. REAR AXLE

3.1 TIGHTENING TORQUES

The tightening torques stated in this paragraph
are different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.

When attachment bolts and nuts are replaced, it
is important that - unless stated otherwise - these
bolts and nuts are of exactly the same length and
property class as those removed.

M24 U-bolt nut, property class 8

(1) Evenly tighten the two U-bolt nuts alternately.

M24 U-bolt nut, property class 10

(1) Evenly tighten the two U-bolt nuts alternately.

M22 U-bolt nut, property class 10
(leading rear axle)

(1) Evenly tighten the two U-bolt nuts alternately.

Filler and drain plugs/hub plugs (Torx wrench)

85 Nm

If flanged nut

740 Nm

≥ 55 Nm

(1)

If yellow zinc plated hexagonal nut

615 Nm

≥ 50 Nm

(1)

If flanged nut

880 Nm

≥ 60 Nm

(1)

If yellow zinc plated hexagonal nut

615 Nm

≥ 50 Nm

(1)

If flanged nut

700 Nm

≥ 50 Nm

(1)

If yellow zinc plated hexagonal nut

530 Nm

≥ 40 Nm

(1)

TECHNICAL DATA

3-2

©

200423

Rear axle

0

ΧΦ85 series

3.2 FILLING CAPACITIES

Differential

Filling quantity with
minimum caster

Filling quantity with
maximum caster

1339 axle

approx. 18.0 litres

approx. 20.0 litres

1347 axle

approx. 21.5 litres

approx. 23.5 litres

1354 axle

approx. 16.5 litres

approx. 16.5 litres

1355(T) axle (1

st

axle)

approx. 13.0 litres

approx. 18.0 litres

1355(T) axle (2

nd

axle)

approx. 11.5 litres

approx. 13.0 litres

1132(T) axle (1

st

axle)

approx. 17.0 litres

approx. 25.5 litres

1132(T) axle (2

nd

axle)

approx. 15.0 litres

approx. 17.5 litres

Wheel hub

Filling capacity per hub

1354 axle

approx. 2 litres

1355(T) axle

approx. 2 litres

1132(T) axle

approx. 0.8 litres

©

200423

4-1

Brakes

TECHNICAL DATA

ΧΦ85 series

0

4. BRAKES

4.1 GENERAL

Brake travel of automatic brake adjuster (Haldex)

35 - 40 mm

Brake travel of automatic brake adjuster
(FTP axle)

25 - 35 mm

Reverse torque of adjusting bolt

> 18 Nm

TECHNICAL DATA

4-2

©

200423

Brakes

0

ΧΦ85 series