DAF CF65, CF75, CF85 Series . Manual — part 346
3
CF65/75/85 series
Removal and installation
AUTOMATIC GEARBOXES
4-5
4.3 REMOVAL AND INSTALLATION, OIL FILTERS
Removing the oil filters
1.
Remove the attachment bolts from the filter
covers (2) and take the filter covers off.
Collect any oil flowing out of the system.
2.
Remove the oil filters from the oil sump.
3.
Remove the various O-rings from the filter
covers.
4.
If a gasket has been used, remove the
gasket remnants from the filter covers and
the contact surfaces.
Installing the oil filters
1.
Lightly lubricate the new O-rings with clean
gearbox oil and fit the various O-rings on
the filter covers.
Note:
Compare the new O-rings with the old
O-rings to ensure that the correct O-rings
are being used.
2.
If a gasket has been used, fit a new gasket
on the filter cover.
3.
Lightly lubricate the rubber inner ring of the
oil filters with clean gearbox oil and fit the oil
filters on the filter covers.
4.
Carefully position the filter covers and oil
filters on the gearbox and tighten the
attachment bolts to the specified torque.
See “Technical data”.
5.
Check the oil level. See “Inspection and
adjustment”.
V300371
2
1
9
ᓻ 200337
3
AUTOMATIC GEARBOXES
Removal and installation
CF65/75/85 series
4-6
9
ᓻ 200337
3
CF65/75/85 series
Draining and filling
AUTOMATIC GEARBOXES
5-1
5. DRAINING AND FILLING
5.1 DRAINING AND FILLING, GEARBOX
To prevent skin injury, avoid
unnecessary contact with the
drained oil.
Draining the gearbox
1.
Bring the gearbox to operating temperature
(approx. 71
_C - 93_C) before the oil is
drained, so that the oil can be drained more
quickly and more completely.
2.
Place the vehicle on a level surface.
3.
Remove the drain plug (1) from the gearbox
oil sump.
4.
Remove the oil filters (2). See “Removal
and installation”.
Filling the gearbox
1.
Clean the drain plug (1) and, fitted with a
new sealing ring, tighten it to the specified
torque. See “Technical data”.
2.
Install the oil filters (2). See “Removal and
installation”.
3.
Fill the gearbox through the dipstick holder
with the specified oil quantity. See
“Technical data”.
V300371
2
1
W 3 03 098
9
ᓻ 200337
3
AUTOMATIC GEARBOXES
Draining and filling
CF65/75/85 series
5-2
4.
Check whether the oil level is at the “Cold
full” mark.
Note:
To take the dipstick out of the holder, the
sealing cap must be held tightly and the
dipstick turned anti-clockwise.
5.
Use the selector keypad to check the oil
level. See “Inspection and adjustment”.
HOT
FULL
COLD
FULL
HOT
ADD
COLD
ADD
W 3 03 099
9
ᓻ 200337
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст