DAF CF65, CF75, CF85 Series . Manual — part 170
©
200351
1
Contents
TECHNICAL DATA
ΧΦ65/75/85 series
2
0
0 Tech nical data
CONTENTS
Page
Date
TECHNICAL DATA
2
©
200351
Contents
0
ΧΦ65/75/85 series
2
©
200351
1-1
CE engine
TECHNICAL DATA
ΧΦ65/75/85 series
2
0
1. CE ENGINE
1.1 GENERAL
Engine types
General specifications
Exhaust manifold
Cylinder block
Cold engine
A cold engine is an engine which, having reached
operating temperature, has been allowed to cool
down for at least six hours.
Warm engine
A warm engine is an engine which, having
reached operating temperature, has been
allowed to cool down for not more than thirty
minutes.
Direction of rotation of the engine
The direction of rotation of the engine is
clockwise, as seen from the vibration damper
end.
First cylinder of the engine
The first cylinder of the engine is the cylinder at
the vibration damper end of the engine.
Left-hand and right-hand side of the engine
The left-hand side of the engine is the side where
the air compressor and electronic unit are
mounted. The right-hand side of the engine is the
side where the turbocharger and oil filter are
mounted.
Coding
CE 136 C
CE 162 C
CE 184 C
Environmental standard
Euro 3 (C)
Number of cylinders
6 cylinders in line
Valves
4 per cylinder
Bore x stroke
102 x 120 mm
Cubic capacity
5.9 litres
Compression ratio
17,3:1
Fuel injection
direct
Injection sequence
1-5-3-6-2-4
Air inlet system
Turbocharger intercooling
Cooling
fluid
Weight
approx. 498 kg
ENGINE TYPE
P (kW) at rpm
M (Nm) at rpm
CE 136 C
136 at 2500
700 at 1200 - 1600
CE 162 C
162 at 2500
820 at 1250 - 1600
CE 184 C
184 at 2500
950 at 1200 - 1600
Maximum flatness deviation
0.20 mm
Flatness deviation in the longitudinal direction
max. 0.076 mm
Flatness deviation in the lateral direction
max. 0.051 mm
TECHNICAL DATA
1-2
©
200351
CE engine
0
ΧΦ65/75/85 series
2
Cylinder head
Cylinder head gasket
Type cylinder head gasket to be used:
Cylinder head bolts
Rough value
0.4 - 1.6 mm
Flatness deviation in the longitudinal direction
max. 0.305 mm
Flatness deviation in the lateral direction
max. 0.076 mm
Test pressure using air
max. 2.75 bar
Water pressure temperature
approx. 60
C
M201231
Thickness:
1.15 mm
M201232
Thickness:
1.25 mm
Average piston projection
Thickness of cylinder head gasket
< 0.301 mm
1.15 mm
0.301 mm
1.25 mm
M201249
OK
OK
Maximum
dimensions of visible
corrosion or pitting
1 cm
2
Maximum depth of
pitting
0.12 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст