DAF CF65, CF75, CF85 Series . Manual — part 458
©
200324
5-1
Cleaning
PE ENGINE INLET/EXHAUST SYSTEM
CF65/75/85 series
4
6
5. CLEANING
5.1 CLEANING THE EXTERIOR OF RADIATOR/AIR COOLER
}
Inhalation of dust may have serious
consequences for your health. Take
the necessary precautions, such as
wearing goggles and a face mask.
Cleaning wire mesh
1.
Remove the lower grille.
2.
Remove the wire mesh.
3.
Clean the wire mesh.
Cleaning, radiator/air cooler
With the aid of a simple tool, the radiator and the
air cooler can be blow-cleaned.
This tool can be made in your own workshop. It
cannot be ordered from DAF.
Key to drawing:
1.
Solder up
2.
Solder
3.
Quick-release coupling for air hose
4.
Steel pipe, ø 10 mm
5.
6 x ø 1.5 mm between holes, with a centre-
to-centre distance between the holes of 7
mm, drilled on one side.
Note:
Make sure that the air cooler and radiator
element are not damaged when positioning the
radiator cleaner.
1.
From below, insert the radiator cleaner (4)
between the air cooler (1) and radiator (2),
with the air holes facing the air cooler (1).
2.
Apply air pressure to the radiator cleaner (4)
and continue blow-cleaning the air cooler (1)
until no more dirt comes out.
100mm
5mm
2
1150mm
2
4
3
5
5
4
1
1
M2108
1
2
3
4
M2109
P
PE ENGINE INLET/EXHAUST SYSTEM
5-2
©
200324
Cleaning
6
CF65/75/85 series
4
3.
Turn the radiator cleaner over, turning the
holes towards the radiator (2), and blow-
clean the radiator (2).
4.
Fit the wire mesh.
5.
Install the lower grille.
5.2 CLEANING, AIR FILTER ELEMENT
}
Inhalation of dust may have serious
consequences for your health.
Use mouth and eye protection.
1.
Remove the air filter element. See "Removal
and installation".
2.
Check the air filter element for damage. If the
air filter element or its sealing rings are
damaged, the air filter element must be
replaced.
3.
Knock out the air filter element.
4.
Blow-clean the air filter element by blowing
pressurised air through from the inside,
using a maximum pressure of approx. 1.5
bar.
5.
Fit the air filter element. See "Removal and
installation".
1
2
3
4
M2110
P
M2009
©
200324
1
Contents
ENGINE BRAKE, PE ENGINE
CF65/75/85 series
4
7
7 Engine brake, PE Engine
CONTENTS
Page
Date
1.
SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 . . . . . 200324
1.1
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 . . . . . 200324
2.
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 . . . . . 200324
2.1
Location of exhaust brake components . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 . . . . . 200324
2.2
System description, exhaust brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 . . . . . 200324
3.
INSPECTION AND ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 . . . . . 200324
3.1
Inspection and adjustment, exhaust brake . . . . . . . . . . . . . . . . . . . . . . . . 3-1 . . . . . 200324
4.
REMOVAL AND INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 . . . . . 200324
4.1
Removal and installation of exhaust brake . . . . . . . . . . . . . . . . . . . . . . . . 4-1 . . . . . 200324
ENGINE BRAKE, PE ENGINE
2
©
200324
Contents
7
CF65/75/85 series
4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст