Honda Civic. Manual — part 240
19. Install shift solenoid valve D (black connector) and shift solenoid valve C
(brown connector) by holding the shift solenoid valve body; make sure the
mounting bracket contacts the servo body.
20. Install shift solenoid valve B (black connector) by holding the shift solenoid
valve body; make sure the mounting bracket contacts the servo body.
21. Install shift solenoid valve A (brown connector) by holding the shift solenoid
valve body; make sure the mounting bracket contacts the bracket of shift
solenoid valve B.
22. Connect the shift solenoid harness connectors:
BLU wire to shift solenoid valve A.
ORN, WHT, and WHT wires to shift solenoid valve B.
GRN wire to shift solenoid valve C.
YEL wire to shift solenoid valve D.
23. Install the shift solenoid valve cover, the dowel pins, a new gasket, and the
harness clamp bracket.
24. Check the connector for rust, dirt, or oil, then connect the connector securely.
25. Refill the transmission with ATF (see step 5 ).
26. Install the splash shield.
NOTE:
A new solenoid valve comes with new O-rings. If you
install a new solenoid valve, use the O-rings provided
on it.
NOTE:
Do not hold the solenoid valve by the connector when
installing the solenoid valve. Be sure to hold the
solenoid valve body.
NOTE:
Do not install shift solenoid valve A before installing
shift solenoid valve B. If shift solenoid valve A is
installed before installing shift solenoid valve B, it may
damage to hydraulic control system.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
SHIFT SOLENOID VALVE AND SHIFT SOLENOID WIRE HARNESS REPLACEMENT
1. Raise the vehicle on a lift, or apply the parking brake, block rear wheels, and
raise the front of the vehicle. Make sure it is securely supported.
2. Remove the splash shield.
3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).
Fig. 183: Identifying Drain Plug, Sealing Washer & Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Reinstall the drain plug with a new sealing washer (B).
5. Remove the shift solenoid valve cover (A), the dowel pins (B), the gasket (C),
and the harness clamp bracket (D).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 184: Identifying Shift Solenoid Valve Cover, Dowel Pins, Gasket,
Harness Clamp Bracket & Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Disconnect the shift solenoid valve connectors.
If replacing shift solenoid valve(s), go to step 7.
If replacing the shift solenoid harness, remove the shift solenoid harness
connector (A), and replace it. Install a new O-ring (B) on the new shift
solenoid harness connector, and install it in the transmission housing, then
go to step 12.
Fig. 185: Identifying Shift Solenoid Harness Connector, O-Ring &
Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
7. Remove the mounting bolts, then hold the shift solenoid valve body and
remove the solenoid valves. Do not hold the connector to remove the solenoid
valve.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 186: Identifying Shift Solenoid Valve, O-Ring & Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
8. Install new O-rings (two O-rings per solenoid valve) (E) on the solenoid valve.
9. Install shift solenoid valve D (black connector) and shift solenoid valve C
(brown connector) by holding the shift solenoid valve body; make sure the
mounting bracket contacts the servo body.
10. Install shift solenoid valve B (black connector) by holding the shift solenoid
valve body; make sure the mounting bracket contacts the servo body.
11. Install shift solenoid valve A (brown connector) by holding the shift solenoid
valve body; make sure the mounting bracket contacts the bracket of shift
solenoid valve B.
NOTE:
A new solenoid valve comes with new O-rings. If you
install a new solenoid valve, use the O-rings provided
on it.
NOTE:
Do not hold the solenoid valve by the connector when
installing the solenoid valve. Be sure to hold the
solenoid valve body.
NOTE:
Do not install shift solenoid valve A before installing
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст