Honda Civic. Manual — part 1107

Courtesy of AMERICAN HONDA MOTOR CO., INC.

4. Disconnect the 5P connector from the wiper motor (B), then remove the six

bolts and wiper linkage assembly (C).

5. Make sure the mark (A) on the link (B) is aligned with the mark (C) on the

windshield wiper linkage (D).

Fig. 17: Aligning Mark On Windshield Wiper Linkage (With
Specifications)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

6. Remove the nut (E), and separate the link and windshield wiper linkage.
7. Remove the three bolts, and separate the windshield wiper linkage from the

wiper motor (F).

8. Install in the reverse order of removal, and note these items:

Align the marks of the link and the linkage to install the linkage with the
original adjustment.

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Wipers/Washers - Civic (All Except Hybrid)

Apply multipurpose grease to the moving parts.

Before installing the wiper arms, turn the wiper switch ON, then OFF to
return the wiper shafts to the park position.

If necessary, replace any damaged clips.

9. After installation, adjust the wiper arms (see WIPER ARM/NOZZLE

ADJUSTMENT ).

2-DOOR

1. Open the hood. Remove the caps, nuts (A), and the windshield wiper arms (B).

Fig. 18: Removing Windshield Arms (With Specifications)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2. Remove the cowl covers (C).
3. Remove the bolts and the under-cowl panel (A).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Wipers/Washers - Civic (All Except Hybrid)

Fig. 19: Removing Under-Cowl Panel (With Specifications)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

4. Disconnect the 5P connector from the wiper motor (B), then remove the six

bolts and wiper linkage assembly (C).

5. Make sure the mark (A) on the link (B) is aligned with the mark (C) on the

windshield wiper linkage (D).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Wipers/Washers - Civic (All Except Hybrid)

Fig. 20: Aligning Mark On Windshield Wiper Linkage (With
Specifications)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

6. Remove the nut (E), and separate the link and windshield wiper linkage.
7. Remove the three bolts, and separate the windshield wiper linkage from the

wiper motor (F).

8. Install in the reverse order of removal, and note these items:

Align the marks of the link and the linkage to install the linkage with the
original adjustment.

Apply multipurpose grease to the moving parts.

Before installing the wiper arms, turn the wiper switch ON, then OFF to
return the wiper shafts to the park position.

If necessary, replace any damaged clips.

9. After installation, adjust the wiper arms (see WIPER ARM/NOZZLE

ADJUSTMENT ).

WIPER/WASHER SWITCH REPLACEMENT

1. Remove the dashboard lower cover (see DRIVER'S DASHBOARD LOWER

COVER REMOVAL/INSTALLATION ).

2. Remove the steering column covers (see STEERING COLUMN

REMOVAL AND INSTALLATION ).

3. Disconnect the dashboard wire harness 8P connector (A) from the

wiper/washer switch (B).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Wipers/Washers - Civic (All Except Hybrid)