Honda Civic. Manual — part 978

Fig. 16: Prying Master Switch

2. Disconnect the 22P connector (B) from the power window master switch.
3. Check for continuity between the terminals in each switch position according

to Fig. 17, Fig. 18, Fig. 19 and Fig. 20 .

Driver's Switch (With AUTO UP/AUTO DOWN)

The driver's switch is combined with the control unit, so you cannot isolate the
switch to test it. Instead, run the master switch input test procedures (see 4-
DOOR WITH AUTO UP/AUTO DOWN FUNCTION ). If the tests are
normal, the driver's switch must be faulty. Replace the switch.

Driver's Switch (Without AUTO UP/AUTO DOWN)

Fig. 17: Drives's Switch (Without AUTO UP/AUTO DOWN) Continuity
Table

Front Passenger's Switch

Fig. 18: Front Passenger's Switch Terminals Continuity Table

Left Rear Switch

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)

Fig. 19: Left Rear Switch Continuity Table

Right Rear Switch

Fig. 20: Right Rear Switch Continuity Table

4. If the continuity is not as specified, remove the screws and replace the switch.
5. Install the switch in the reverse order of removal.

2-DOOR

1. Remove the power window master switch, and disconnect the 16P connector

from the switch (see DOOR PANEL REMOVAL/INSTALLATION ).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)

Fig. 21: Disconnecting 16P Connector

2. Check for continuity between the terminals in each switch position according

to Fig. 22 and Fig. 23 .

Driver's Switch (With AUTO UP/AUTO DOWN)

The driver's switch is combined with the control unit, so you cannot isolate the
switch to test it. Instead, run the master switch input test procedures (see 2-
DOOR WITH AUTO UP/AUTO DOWN FUNCTION ). If the tests are
normal, the driver's switch must be faulty.

Driver's Switch (Without AUTO UP/AUTO DOWN)

Fig. 22: Driver's Switch (Without AUTO UP/AUTO DOWN) Continuity
Table

Passenger's Switch

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)

Fig. 23: Passenger Switch Continuity Table

3. If the continuity is not as specified, remove the screws and replace the switch.
4. Install the switch in the reverse order of removal.

PASSENGER'S POWER WINDOW SWITCH TEST/REPLACEMENT

1. 4-door: Remove the passenger's switch (A).

2-door: Remove the passenger's switch (see DOOR PANEL
REMOVAL/INSTALLATION ).

2008 Honda Civic EX

2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)