Honda Civic. Manual — part 976
Fig. 11: Disconnecting 16P Connector
3. Inspect the connector and socket terminals to be sure they are all making good
contact.
If the terminals are bent, loose or corroded, repair them as necessary, and
recheck the system.
If the terminals look OK, make the following input tests at the connector.
If a test indicates a problem, find and correct the cause, then recheck
the system.
If all the input tests prove OK, the power window master switch must
be faulty; replace it.
4. With the master switch still disconnected, make these input tests at the
connector.
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)
If any test indicates a problem, find and correct the cause, then recheck the
system.
If all the input tests prove OK, go to step 5.
MASTER SWITCH INPUT TEST (DISCONNECTED)
5. Reconnect the 16P connector to the power window master switch. Turn the
ignition switch ON (II), and make these input tests at the connector.
If any test indicates a problem, find and correct the cause, then recheck the
system.
If all the input tests prove OK, the control unit must be faulty; replace the
Cavity Wire
Test condition
Test: Desired
result
Possible cause if
result is not
obtained
2
GRN
Connect the No. 12 and
the No. 2 terminals and
No. 3 and No. 7
terminals momentarily
with jumper wires.
Check driver's
window motor
operation: The
window should go
down.
Faulty driver's
power window
motor
An open in the
wire
3
YEL
Connect the No. 12 and
the No. 3 terminals and
No. 2 and No. 7
terminals momentarily
with jumper wires.
Check driver's
window motor
operation: The
window should go
up.
8
BRN
Connect the No. 12 and
the No. 8 terminals and
No. 9 and No. 1
terminals momentarily
with jumper wires.
Check passenger's
window motor
operation: The
window should go
down.
Faulty
passenger's
power window
motor
Faulty
passenger's
power window
switch
An open in the
wire
9
ORN
Connect the No. 12 and
the No. 9 terminals and
No. 8 and No. 1
terminals momentarily
with jumper wires.
Check passenger's
window motor
operation: The
window should go
down.
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)
power window master switch.
MASTER SWITCH INPUT TEST (RECONNECTED)
Cavity Wire Test condition
Test: Desired result
Possible cause H
result is not
obtained
10
BRN
Ignition switch
ON (II)
Check for voltage to
ground: There should be
battery voltage.
Blown No. 10
(7.5 A) fuse
in the under-
dash
fuse/relay box
An open in
the wire
11
GRN
Ignition switch
ON (II)
Check for voltage to
ground: There should be
battery voltage.
Blown No. 30
(20 A) fuse in
the under-
dash
fuse/relay box
Faulty power
window relay
Faulty MICU
An open in
the wire
12
WHT
Under all
conditions
Check for voltage to
ground: There should be
battery voltage.
Blown No. 26
(20 A) fuse in
the under-
hood
fuse/relay box
An open in
the wire
1
BLK
Ignition switch
ON (II), main
switch ON, and
Check for voltage to
ground: There should be
Poor ground
(G503)
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)
passenger's
window moving,
up and down
less than 0.5 V.
An open in
the wire
7
BLK
Ignition switch
ON (II), and
driver's window
moving up and
down
Check for voltage to
ground: There should be
less than 0.5 V.
Poor ground
(G503)
An open in
the wire
16
BRN
Under all
conditions
Check for voltage to
ground: There should be
less than 0.5 V.
Poor ground
(G503)
An open in
the wire
13
PUR
Ignition switch
ON (II)
Check for voltage to
ground: There should be
battery voltage.
Faulty power
window
master switch
Short to
ground in the
wire
14
ORN
Ignition switch
ON (II), and
driver's power
window switch
moving up or
down
Check for voltage between
the No. 14 and No. 16
terminals: There should be
0 V-about 5 V -0 V-about
5 V repeatedly (a digital
voltmeter should reads
about 2.5 V while the
window moves).
Faulty power
window
master switch
Faulty driver's
power
window
motor
An open in
the wire
Short to
ground in the
wire
15
PNK
Ignition switch
ON (II), and
driver's power
window switch
moving up or
down
Check for voltage between
the No. 15 and No. 16
terminals: There should be
0 V-about 5 V -0 V-about
5 V repeatedly (a digital
voltmeter should reads
about 2.5 V while the
window moves).
2008 Honda Civic EX
2006-08 ACCESSORIES & EQUIPMENT Power Windows - Civic (All Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст