Honda Civic. Manual — part 279
Fig. 396: Identifying Shift Solenoid Valve, O-Ring & Bolts w/Torque
Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install shift solenoid valve D (black connector) by holding the shift solenoid
valve body; be sure to install the mounting bracket contacts to the servo body.
4. Install shift solenoid valve C (brown connector) by holding the shift solenoid
valve body; be sure to install the mounting bracket contacts to the servo body.
5. Install shift solenoid valve B (black connector) by holding the shift solenoid
valve body; be sure to install the mounting bracket Contacts to the servo body.
6. Install shift solenoid valve A (brown connector) by holding the shift solenoid
valve body; be sure to install the mounting bracket contacts to the bracket of
shift solenoid valve B.
you install a new solenoid valve, use the O-rings
provided on it.
NOTE:
Do not install shift solenoid valve A before installing
shift solenoid valve B. If shift solenoid valve A is
installed before installing shift solenoid valve B, it may
damage to hydraulic control system.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
TORQUE CONVERTER HOUSING
MAINSHAFT BEARING AND OIL SEAL REPLACEMENT
Special Tools Required
Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
Driver 07749-0010000
Attachment, 62 x 68 mm 07746-0010500
Attachment, 72 x 75 mm 07746-0010600
1. Remove the mainshaft bearing and oil seal using the adjustable bearing puller
and a commercially available 3/8"-16 slide hammer (A).
Fig. 397: Removing Mainshaft Bearing And Oil Seal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new mainshaft bearing until it bottoms in the torque converter housing
using the driver and the 62 x 68 mm attachment.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 398: Tapping Mainshaft Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install a new oil seal flush with the housing using the driver and the 72 x 75
mm attachment.
Fig. 399: Tapping Oil Seal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
COUNTERSHAFT BEARING REPLACEMENT
Special Tools Required
Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
Driver 07749-0010000
Attachment, 62 x 68 mm 07746-0010500
1. Remove the countershaft bearing using the adjustable bearing puller and a
commercially available 3/8"-16 slide hammer (A).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 400: Removing Countershaft Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install the ATF guide plate (A).
Fig. 401: Tapping ATF Guide Plate
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install a new countershaft bearing (B) in the housing using the driver and the
62 x 68 mm attachment; install the bearing outer race surface in height (C) of
0-0.03 mm (0-0.001 in.) above the housing surface (D). Do not install the
bearing exceeding 0.03 mm (0.001 in.) high from housing surface.
SECONDARY SHAFT BEARING REPLACEMENT
Special Tools Required
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст