Honda Civic. Manual — part 280
Driver 07749-0010000
Attachment, 62 x 68 mm 07746-0010500
1. Remove the bolt, then remove the lock washer (A) and the bearing set plate
(B).
Fig. 402: Identifying Lock Washer, Bearing Set Plate w/Torque
Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the secondary shaft bearing (A) by heating the housing to about 212 °
F (100 °C) with a heat gun (B). Do not heat the housing more than 212 °F (100
°C).
NOTE:
Let the housing cool to normal temperature before
installing the bearing.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 403: Heating Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install new O-rings (A) on the ATF guide collar (B), then install the ATF guide
collar in the housing.
Fig. 404: Identifying O-Rings And ATF Guide Collar
Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install a new secondary shaft bearing (C) in the direction shown.
5. Install the secondary shaft bearing using the driver and the 62 x 68 mm
attachment securely in the housing.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 405: Tapping Secondary Shaft Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Check that the bearing groove aligns with the housing surface, then install the
bearing set plate aligned with the bearing groove.
7. Install a new lock washer and the bolt, then bend the lock tab of the lock
washer against the bolt head.
LUBRICATION CHECK VALVE REPLACEMENT
1. Remove the sealing bolt (A) and the sealing washer (B).
Fig. 406: Identifying Lubrication Check Valve, Sealing Bolt, Sealing
Washer & Bolt w/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the lubrication check valve (C) from the torque converter housing (D).
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
3. Install a new lubrication check valve, a new sealing washer, and the sealing
bolt.
SELECTOR CONTROL SHAFT OIL SEAL REPLACEMENT
Special Tools Required
Driver 07749-0010000
Oil seal driver attachment 07947-ZV00100
1. Remove the oil seal from the torque converter housing.
Fig. 407: Identifying Oil Seal
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. install a new oil seal (A) in the torque converter housing to a depth (B) of 0.5-
1.5 mm (0.02-0.06 in.) below the housing surface using the driver and the oil
seal driver attachment.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст