Honda Civic. Manual — part 300
Fig. 515: Measuring Backlash Of Pinion Gears
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Measure the backlash of the pinion gears (B) using a dial indicator (C).
Standard: 0.05-0.15 mm (0.002-0.006 in.)
3. If the backlash is out of standard, replace the differential carrier (see
DIFFERENTIAL CARRIER AND FINAL DRIVEN GEAR
REPLACEMENT ).
DIFFERENTIAL CARRIER AND FINAL DRIVEN GEAR REPLACEMENT
1. Remove the final driven gear (A) from the differential carrier (B). The final
driven gear bolts have left-hand threads.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 516: Identifying Final Driven Gear, Differential Carrier & Bolts
w/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new final driven gear on the differential carrier in the direction shown.
Tighten the bolts to 101 N.m (10.3 kgf.m, 74.5 lbf.ft) in a crisscross pattern in
two or more steps.
CARRIER BEARING REPLACEMENT
Special Tools Required
Driver, 40 mm I.D. 07746-0030100
1. Place a collar (A) on the differential carrier, and remove the carrier bearing (B)
using the commercially available bearing puller (C).
NOTE:
Check the bearing for wear and rough rotation. If the
bearing is OK, removal is not necessary.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 517: Removing Carrier Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new bearing using the 40 mm I.D. driver and a press. Press the bearing
on until it bottoms.
Fig. 518: Pressing Bearing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
OIL SEAL REPLACEMENT
Special Tools Required
Driver 07749-0010000
Oil seal driver attachment 07JAD-PH80101
1. Remove the oil seal from the transmission housing.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Fig. 519: Identifying Oil Seal From Transmission Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Remove the oil seal from the torque converter housing.
Fig. 520: Identifying Oil Seal From Torque Converter Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install a new oil seal flush with the transmission housing using the driver and
the oil seal driver attachment.
2008 Honda Civic LX
2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст