Honda Ridgeline. Manual — part 470
04
01
SJC8A00J32133131131KBAT00
22-176
22-176
Exterior Lights
Headlight Adjustment (cont’d)
Headlight Replacement
A
D
B
C
B
5. If necessary, open the hood and adjust the
headlights to local requirements by turning the
vertical adjuster.
1. Remove the front bumper (see page 20-132).
2. Remove the corner cover (A).
3. Remove the connectors (B) from the headlight
assembly (C).
4. Remove the five mounting bolts and clip, then
remove the headlight.
5. Remove the bolt and the corner upper beam (D)
from the headlight.
6. Install the headlight in the reverse order of removal.
7. After replacement, adjust the headlight to local
requirement.
01
02
SJC8A00J32173614881KBAT00
Headlight
Front Turn Signal/Side Marker Lights
Headlight (high/low):
60/55 W
Front Turn Signal/Side Marker Lights:
28/8 W
22-177
Bulb Replacement
A
B
A
B
1. Disconnect the 3P connector (A) from the headlight.
2. Turn the bulb socket (B) 45 ° counterclockwise to
remove the bulb.
3. Install a new bulb in the reverse order of removal.
1. Remove the inner fender (see page 20-178).
2. Disconnect the 3P connector (A) from the front turn
signal/side marker light.
3. Turn the bulb socket (B) 45 ° counterclockwise to
remove the bulb.
4. Install a new bulb in the reverse order of removal.
*01
SJC8A00J32173159121KBAT00
*01
SJC8A00J32100037301KBAT20
Brake/Taillight:
21/5 W
Turn signal Light: 21 W
Back-up Light:
18 W
License Plate Light: 3 CP x 2
22-178
22-178
Exterior Lights
Taillight Replacement
License Plate Light Replacement
A
B
C
C
A
B
C
1. Open the tailgate.
2. Remove the two bolts from the taillight (A).
3. Carefully pull out the taillight, and disconnect the
connector (B) from the taillight.
4. Turn the bulb sockets (C) 45 ° counterclockwise to
remove the bulb.
5. Install the taillight in the reverse order of removal.
1. Remove the license plate light (A), and disconnect
the 2P connector (B) from the light.
2. Turn the bulb socket (C) 45 ° counterclockwise to
remove the bulb.
3. Install the light in the reverse order of removal.
01
SJC8A00J32113331601KBAT00
High Mount Brake Light: 3 CP x 4
22-179
High Mount Brake Light Replacement
A
B
1. Remove the covers (A) and screws from the high
mount brake light (B).
2. Install the light in order reverse of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст