Honda Civic (2022 year). Manual in english — page 9
145
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
Continued
In
strum
e
nt Pa
nel
If two bars light up, the
Driver attention
level low
message will appear.
If one bar lights up, the
Driver attention
level low. Time for a break.
message will
appear, a beep will sound, and the steering
wheel will vibrate.
If this message appears, stop in a safe location
and rest for as long as needed.
The message will disappear when the right
selector wheel is rolled or when the system
has determined that the driver is driving
normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the message will appear again after
approximately 15 minutes, accompanied by a
beep and steering wheel vibrations.
The message does not appear when the
traveling time is 30 minutes or less.
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
146
In
strum
e
nt Pa
nel
■
The Driver Attention Monitor resets when:
•
The engine is turned off.
•
The driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function:
•
The vehicle must be traveling above 25 mph (40 km/h).
•
The electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:
•
The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2
Lane Keeping Assist System (LKAS)
P. 516
•
The condition of the road is poor, e.g. the surface is unpaved or bumpy.
•
It is windy.
•
The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select
Tactile And Audible
Alert
,
Tactile Alert
, or
OFF
.
2
P. 363
1
For the Driver Attention Monitor to function:
The bars on the driver information interface remain
grayed out unless the Driver Attention Monitor is
functioning.
147
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
Continued
In
strum
e
nt Pa
nel
Appears when any of the seat belts are latched or unlatched.
Shows the remaining oil life and Maintenance Minder
TM
.
2
■
Seat Belts
■
Maintenance
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
148
In
strum
e
nt Pa
nel
Indicates the state of the Road Departure Mitigation system, CMBS
TM
, Low Speed
Braking Control and blind spot information system such as On, Off, or Failure, by
color and letters.
The following colors indicate the state of any of the above mentioned systems:
•
Green: The system is on.
•
Gray: The system is off.
•
Amber: There is a problem with the system.
■
Safety Support
1
If a system is indicated by the color amber, have your
vehicle checked by a dealer immediately.
To turn on or off each system, first press the right
selector wheel to switch displays. From the next
display you can select which system to turn on or off.
2
Road Departure Mitigation system On and
Off
2
Blind Spot Information System On and Off
P. 471
2
P. 491
2
P. 480
You can also confirm the state of the each function
by the color of the safety support indicator.
2
Safety Support Indicator (Amber)
P. 106
2
Safety Support Indicator (Green/Gray)
P. 108
Even when the Low Speed Braking Control icon is
green, if the parking sensor is turned off for the rear
only, the brake assist will not operate when reversing.
2
149
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
Continued
In
strum
e
nt Pa
nel
Area Info for
Road Departure
Mitigation
System
Area Info for Blind
spot information
system
Blind spot
information system
Icon and State Info
Road Departure
Mitigation System
Icon and State Info
Area Info for the
Low Speed
Braking Control
Low Speed Braking
Control Icon and
State Info
CMBS
TM
Icon
and State Info
Area Info for
CMBS
TM
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
150
In
strum
e
nt Pa
nel
You can check if there are any active warning messages.
Enables you to show another unit on the
driver information interface and set the
displayed measurements to read in either
miles and km, mph and km/h.
Press and hold the right selector wheel when
you select the Blank/Unit change screen on
the driver information interface. Each time you
do this, the unit will change from miles and
mph to km and km/h or vice versa. After this,
a confirmation screen will appear for a few
seconds.
■
Warnings
■
Speed/Distance Units
1
If there are multiple warnings, you can roll the right
selector wheel to see other warnings.
Continued
151
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
In
strum
e
nt Pa
nel
Change the settings to your liking.
■
Arrange content on the right side area
You can choose which contents to display on the right side area.
1.
Press the right selector wheel when you
select the
Customize display
on the driver
information interface.
2.
Roll the right selector wheel to scroll to
select
Hide/show
, then press the right
selector wheel.
3.
Roll the right selector wheel to scroll
between contents, then press the right
selector wheel to check or uncheck them.
■
Customize Display
1
Arrange content on the right side area
Contents that are gray cannot be removed from the
right side area.
When you customize settings, shift to
(
P
.
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
152
In
strum
e
nt Pa
nel
■
Change gauge design
You can change the design, such as speedometer, tachometer and so on.
1.
Press the right selector wheel when you
select the
Customize display
on the driver
information interface.
2.
Roll the right selector wheel to scroll to
select
Gauge design
, then press the right
selector wheel.
3.
Roll the right selector wheel to scroll to
select your desired settings, then press the
right selector wheel.
1
You can select the following design.
Round:
Shows the speedometer and tachometer for
round type.
Bar:
Shows the speedometer and tachometer for bar
type.
Round minimal:
Shows the speedometer and
tachometer for round type while ACC with Low
Speed Follow is not in operation.
Bar minimal:
Shows the speedometer and
tachometer for bar type while ACC with Low Speed
Follow is not in operation.
153
Controls
This chapter explains how to operate the various controls necessary for driving.
. . . . . . . . . . . . .. 154
Locking and Unlocking the Doors
Outside . . . . . . . . . . .. 159
Locking/Unlocking the Doors from the
Inside . . . . . . . . . . . . 166
Childproof Door Locks . . . . . . 168
Auto Door Locking/Unlocking . . .. 169
Immobilizer System . . . . . . .. 173
Security System Alarm. . . . . .. 173
Operating the Switches Around the
Button . . . . . . . . . . ... 192
Brightness Control . . . . . . ... 193
Brightness Control . . . . . . ... 194
Adjusting the Steering Wheel . . .. 195
Interior Rearview Mirror . . . . ... 196
Power Door Mirrors . . . . . . . 197
. . . . . . . . . . . . .. 198
Using Automatic Climate Control . 222
Automatic Climate Control Sensors. ..227
Models with A-type meter
Models with B-type meter
* Not available on all models
154
Co
ntrols
Clock
Adjusting the Clock
You can adjust the time in the clock display with the power mode in ON.
1.
Press the
MENU
button.
2.
Select
Clock Settings
.
3.
Select
Automatic Time
, then select
OFF
.
4.
Select
Set Time
.
5.
Select
12H
/
24H
to change 12 or 24 hour
clock.
6.
Select
or .
7.
Select
Set
to set the time.
■
Adjusting the Time
1
The clock is automatically updated through the audio
system.
You can also select and enter with the
LIST / SELECT
(List / Selector) knob instead of the touch panel.
Models with color audio system
MENU
Button
Models with color audio system
3
4
155
uu
Clock
u
Adjusting the Clock
Co
ntrols
1.
Press the
button.
2.
Select
General Settings
.
3.
Select
System
.
4.
Select
Date & Time
.
5.
Select
Set Date & Time
.
6.
Select
Automatic Date & Time
, then
select
OFF
.
To adjust date:
7.
Select
Set Date
.
8.
Select
or .
9.
Select
Save
to set the date.
To adjust time:
7.
Select
Set Time
.
8.
Select
or .
9.
Select
Save
to set the time.
1
You can also adjust the clock by touching the clock
displayed on the header area of the audio/
information screen,
Clock
displayed on the home
screen, or
All Apps
.
1. Touch the clock on the screen.
The clock screen of the face-type appears.
2. Select
Settings
.
3. Select
Date & Time
.
4. Select
Set Date & Time
.
5. Select
Automatic Date & Time
, then select
OFF
.
6. Select
Set Date
or
Set Time
.
7. Adjusting the dates, hours and minutes by
selecting
or .
8. Select
Save
to set the time.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
2
P. 363
You can customize the date display to
MM/DD/
YYYY
,
DD/MM/YYYY
or
YYYY/MM/DD
.
2
P. 363
Models with Display Audio
3
4
Models with Display Audio
3
4
3
4
156
Co
ntrols
Locking and Unlocking the Doors
Key
This vehicle comes with the following keys:
Use the keys to start and stop the engine, and
to lock and unlock all the doors, fuel fill door
and open the trunk.
1
All the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
2
Follow the advice below to prevent damage to the
keys:
•
Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity.
•
Do not drop the keys or set heavy objects on them.
•
Keep the keys away from liquids, dust or sand.
•
Do not take the keys apart except for replacing the
battery.
If the circuits in the keys are damaged, the engine
may not start, and the remote transmitter may not
work.
If the keys do not work properly, have them
inspected by a dealer.
You can remotely start the engine using the remote
engine start.
2
P. 437
Models with remote engine starter
Models without keyless access system
Models with keyless access system
* Not available on all models
157
uu
Locking and Unlocking the Doors
u
Key
Co
ntrols
The built-in key can be used to unlock the
doors when the remote key battery becomes
weak and the power door unlock operation is
disabled.
To remove the built-in key, push the release
button and then pull out the key. To reinstall
the built-in key, push the built-in key into the
remote key until it clicks.
Contains a number that you will need if you
purchase a replacement key.
■
Built-in Key
Built-in Key
Release Button
■
Key Number Tag
1
Keep the key number tag separate from the key in a
safe place outside of your vehicle.
If you wish to purchase an additional key, contact a
dealer.
If you lose your key and you cannot start the engine,
contact a dealer.
158
uu
Locking and Unlocking the Doors
u
Low Remote Key Signal Strength
Co
ntrols
Low Remote Key Signal Strength
The vehicle transmits radio waves to locate the remote key when locking/unlocking
*
the doors and fuel fill door, opening
*
the trunk, or starting the engine.
In the following cases, locking/unlocking
*
the doors, opening
*
the trunk, or starting
the engine may be inhibited or operation may be unstable:
•
Strong radio waves are being transmitted by nearby equipment.
•
You are carrying the remote key together with telecommunications equipment,
laptop computers, cell phones, or wireless devices.
•
A metallic object is touching or covering the remote key.
1
Low Remote Key Signal Strength
Communication between the remote key and the
vehicle consumes the remote key's battery.
Battery life is about two years, but this varies
depending on regularity of use.
The battery is consumed whenever the remote key is
receiving strong radio waves. Avoid placing it near
electrical appliances such as televisions and personal
computers.
* Not available on all models
159
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
Continued
Co
ntrols
Locking/Unlocking the Doors from the Outside
When you carry the remote key, you can lock/
unlock the doors, fuel fill door, and open the
trunk.
You can lock/unlock the doors and fuel fill door
within a radius of about 32 inches (80 cm) of
the outside door handle. You can open the
trunk within about 32 inches (80 cm) radius
from the trunk release button.
■
Locking the doors and trunk
Touch the door lock sensor on the front door.
u
All the doors and trunk lock and the
security system sets.
u
Some exterior lights flash once and the
beeper sounds once.
■
Using the Keyless Access System
*
1
Locking/Unlocking the Doors from the Outside
If the interior light switch is in the door activated position,
the interior lights come on when you unlock the doors.
No doors opened: The lights fade out after 30 seconds.
Doors relocked: The lights go off immediately.
2
P. 207
1
Using the Keyless Access System
If you do not open a door within 30 seconds of
unlocking the vehicle with the keyless access system,
the doors and trunk will automatically relock.
You can lock or unlock doors using the keyless access
system only when the power mode is in VEHICLE OFF.
Door Lock Sensor
* Not available on all models
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
160
Co
ntrols
■
Unlocking the doors and trunk
Grab the driver’s door handle:
u
The driver’s door and fuel fill door
unlock.
u
Some exterior lights flash twice and the
beeper sounds twice.
Grab the front passenger’s door handle:
u
All the doors and trunk unlock.
u
Some exterior lights flash twice and the
beeper sounds twice.
Press the trunk release button:
u
The trunk unlocks and opens.
u
Some exterior lights flash twice and the
beeper sounds once.
2
Using the Trunk Release Button
1
Using the Keyless Access System
•
Do not leave the remote key in the vehicle when
you get out. Carry it with you.
•
Even if you are not carrying the remote key, you
can lock/unlock the doors while someone else with
the remote key is within range.
•
The door may be unlocked if the door handle is
covered with water in heavy rain or in a car wash if
the remote key is within range.
•
If you grip a front door handle or touch the front
door lock sensor wearing gloves, the door sensor
may be slow to respond or may not respond by
locking/unlocking the doors.
•
After locking the door, you have up to 2 seconds
during which you can pull the door handle to
confirm whether the door is locked. If you need to
unlock the door immediately after locking it, wait
at least 2 seconds before gripping the handle,
otherwise the door will not unlock.
•
The door might not open if you pull it immediately
after gripping the door handle. Grip the handle
again and confirm that the door is unlocked before
pulling the handle.
•
Even within the 32 inches (80 cm) radius, you may
not be able to lock/unlock the doors with the remote
key if it is above or below the outside handle.
•
The remote key may not operate if it is too close to
the door and door glass.
The light flash, beep and door unlock mode settings
can be customized using the audio/information
screen or driver information interface.
2
P. 126
2
P. 363
Trunk Release Button
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст