Honda Civic (2022 year). Manual in english — page 8
129
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Meter setup
Language selection
Changes the displayed language.
English
*1
/
Français
/
Español
Adjust outside temp.
display
Adjusts the temperature reading by a few degrees.
-5°F
~
±0°F
*1
~
+5°F
(U.S.)
-3°C
~
±0°C
*1
~
+3°C
(Canada)
“Trip A” reset timing
Changes the setting of how to reset trip meter A,
average fuel economy A, average speed A, and elapsed
time A.
When fully refueled
/
IGN OFF
/
Manually reset
*1
“Trip B” reset timing
Changes the setting of how to reset trip meter B,
average fuel economy B, average speed B, and elapsed
time B.
When fully refueled
/
IGN OFF
/
Manually reset
*1
Adjust alarm volume
Changes the alarm volume, such as buzzers, warnings,
turn signal sound, and so on.
High
/
Mid
*1
/
Low
Fuel efficiency backlight
Turns the ambient meter feature on and off.
ON
*1
/
OFF
Rear seat reminder
Turns the Rear Seat Reminder feature on and off.
ON
*1
/
OFF
Speed/distance units
Selects the trip meter units.
km/h∙km
/
mph∙miles
*1
(U.S.)
km/h∙km
*1
/
mph∙miles
(Canada)
Tachometer
Selects whether the tachometer is displayed on the
instrument panel.
ON
*1
/
OFF
130
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Keyless access
setup
*
Door unlock mode
Changes which doors unlock when you grab the driver’s
door handle.
Driver door only
*1
/
All
doors
Keyless access light
flash
Causes some exterior lights to flash when you unlock/
lock the doors.
ON
*1
/
OFF
Keyless access beep
Causes the beeper to sound when you unlock/lock the
doors.
ON
*1
/
OFF
Remote start system
ON/OFF
Turns the remote engine start feature on and off.
ON
*1
/
OFF
Lighting setup
Auto high-beam
Turns the auto high-beam on and off.
ON
*1
/
OFF
Interior light dimming
time
Changes the length of time the interior lights stay on
after you close the doors.
60sec
/
30sec
*1
/
15sec
Headlight auto off
timer
Changes the length of time the exterior lights stay on
after you close the driver’s door.
60sec
/
30sec
/
15sec
*1
/
0sec
Auto light sensitivity
*
Changes the timing for the headlights to come on.
Max
/
High
/
Mid
*1
/
Low
/
Min
Auto headlight ON
with wiper ON
Changes the settings for the wiper operation when the
headlights automatically come on while the headlight
switch is in the
AUTO
position.
ON
*1
/
OFF
* Not available on all models
131
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Door setup
Auto door lock
Changes the setting for when the doors automatically
lock.
With vehicle speed
*1
/
Shift from P
/
OFF
Auto door unlock
Changes the setting for when the doors automatically
unlock.
All doors when driver’s
door opens
*1
/
All doors
when shifted to Park
/
All doors when ignition
switched OFF
/
OFF
Key and remote unlock
mode
Sets up either the driver’s door or all doors to unlock on
the first operation of the remote key or built-in key.
Driver door
*1
/
All doors
Walk away auto lock
*
Changes the settings for the auto lock function when
you walk away from the vehicle.
ON
/
OFF
*1
Keyless lock answer
back
LOCK/UNLOCK- The exterior lights flash.
LOCK (2nd push)- The beeper sounds.
ON
*1
/
OFF
Keyless remote power
window control
Turns remote window control using the remote key on
and off.
ON
*1
/
OFF
Lockout prevention
*
Changes the settings for the lockout protection
function.
ON
*1
/
OFF
Maintenance
reset
—
Resets the Maintenance Minder display when you have
performed the maintenance service.
(Selects Reset Items)
Default all
—
Cancels customized changes you have made or restores
them to their default setting.
Cancel
/
Set
* Not available on all models
132
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
Example of customization settings
The steps for changing the
“Trip A” reset timing
setting to
When fully refueled
are shown below. The default setting for
“Trip A” reset timing
is
Manually reset
.
1.
Press the
(home) button, to select
Settings
, then press the left selector wheel.
133
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
2.
Roll the left selector wheel until
Meter
setup
appears on the display.
3.
Press the left selector wheel.
u
Language selection
appears first in the
display.
4.
Roll the left selector wheel until
“Trip A”
reset timing
appears on the display, then
press the left selector wheel.
u
The display switches to the
customization setup screen, where you
can select
When fully refueled
,
IGN
OFF
,
Manually reset
, or
Back
.
5.
Roll the left selector wheel and select
When fully refueled
, then press the left
selector wheel.
u
The
Selected
appears, then the display
returns to the customization menu
screen.
134
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
6.
Press the left selector wheel after
Back
appears on the display.
7.
Repeat Step 6 until you return to the
normal screen.
135
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Left Side Area)
Continued
In
strum
e
nt Pa
nel
Driver Information Interface (Left Side Area)
Shows the current mode for audio and phone information, etc.
2
P. 234
2
Shows the clock.
You can adjust the time manually or change the clock display to show the 12 hour
clock or 24 hour clock on the driver information interface by using the audio/
information screen.
2
■
Clock
Models with B-type meter
1
You can choose whether the clock is displayed on the
driver information interface.
2
P. 136
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Left Side Area)
136
In
strum
e
nt Pa
nel
■
Arrange audio source on the left side area
You can choose which sources to display on the audio source screen.
1.
Roll the left selector wheel, then roll the left
selector wheel to scroll to select
Customize
display
and press the left selector wheel.
2.
Roll the left selector wheel to scroll to select
Hide/show
, then press the left selector
wheel.
3.
Roll the left selector wheel to scroll
between audio sources, then press the left
selector wheel to check or uncheck them.
■
Customize Display
1
When you customize settings, shift to
(
P
.
137
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Left Side Area)
In
strum
e
nt Pa
nel
■
Turn the displaying on the left side area on and off
You can select whether the current audio information and clock appear on the left
side area.
1.
Roll the left selector wheel, then roll the left
selector wheel to scroll to select
Customize
display
and press the left selector wheel.
2.
Roll the left selector wheel to scroll to select
Audio & clock
, then press the left selector
wheel.
3.
Roll the left selector wheel to scroll to select
your desired settings, then press the left
selector wheel.
138
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
In
strum
e
nt Pa
nel
Driver Information Interface (Right Side Area)
The driver information interface shows information such as the estimated travelable
distance and fuel economy of the vehicle. It also displays messages such as warnings
and other helpful information.
When a warning message displays, please check the message and contact a dealer
and have the vehicle inspected if necessary. Please refer to the pages below if the
Engine oil pressure low.
or
Engine temperature too hot.
message is displayed.
2
If the Low Oil Pressure Warning Appears
P. 658
2
Models with B-type meter
139
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
Continued
In
strum
e
nt Pa
nel
Roll the right selector wheel to view different types of content.
■
Switching the Display
1
You can add or delete the meter contents.
2
P. 151
Right Selector Wheel
Warning Messages
P. 150
Range / Fuel /
Trip Meter
P. 140
No Content/
Unit Change
P. 150
Driver Attention
Monitor
P. 144
Navigation/Compass
P. 143
Speed & Time
P. 142
Customize Display
P. 151
Maintenance
P. 147
Safety Support
P. 148
Seat Belts
P. 147
140
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
In
strum
e
nt Pa
nel
Press the right selector wheel to switch between trip meter A and trip meter B.
■
Trip meter
Shows the total number of miles or kilometers driven since the last reset. Meters A
and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, press and hold the right selector wheel and then
select
Reset
.
u
The trip meter is reset to 0.0.
■
Range / Fuel / Trip Meter
Trip Meter A
Range
Average Fuel Economy
Instant Fuel
Economy
Trip Meter B
Continued
141
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
In
strum
e
nt Pa
nel
■
Average fuel economy
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
■
Instant fuel economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
■
Range
Shows the estimated distance you can travel on the remaining fuel. This estimated
distance is based on the vehicle’s current fuel economy.
1
You can change when to reset the average fuel
economy.
2
P. 363
1
The driving range displayed is only an estimate and
may differ to the actual distance the vehicle can
travel.
142
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
In
strum
e
nt Pa
nel
Press the right selector wheel to switch between trip meter A and trip meter B.
■
Speed & Time
Trip Meter A
Elapsed Time
Trip Meter B
Average Speed
Continued
143
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
In
strum
e
nt Pa
nel
■
Trip meter
2
P. 140
■
Elapsed time
Shows the time elapsed since Trip A or Trip B was reset.
■
Average speed
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
■
Compass
Shows the compass screen.
■
Turn-by-Turn Directions
When driving guidance is provided by the navigation system, Apple CarPlay or
Android Auto, turn-by-turn directions to your destination appear.
2
Refer to the Navigation System Manual
2
P. 319
2
P. 258
■
Navigation
1
You can change when to reset the elapsed time.
2
P. 363
1
You can change when to reset the average speed.
2
P. 363
1
When the compass or turn-by-turn directions are
displayed, you can control some navigation system
functions on the driver information interface by
pressing the right selector wheel.
2
Refer to the Navigation System Manual
You can select whether to have the turn-by-turn
display come on or not during the route guidance.
2
P. 363
Turn-by-turn directions may not be available for all
apps.
uu
Gauges and Driver Information Interface
u
Driver Information Interface (Right Side Area)
144
In
strum
e
nt Pa
nel
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select Driver Attention Monitor on
the driver information interface, bars on it
light up in white to indicate the degree of the
driver’s attention.
2
P. 139
■
Driver Attention Monitor
1
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information Interface
Right Selector
Wheel
Level
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст