Honda Pilot (2022 year). Manual in english — page 38
606
uu
Cleaning
u
Exterior Care
Main
tenan
ce
Exterior Care
Dust off the vehicle body after you drive.
Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a
painted surface can result in body rust. If you find a scratch, promptly repair it.
Wash the vehicle regularly. Wash more frequently when driving in the following
conditions:
•
If driving on roads with road salt.
•
If driving in coastal areas.
•
If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.
•
Fold in the door mirrors.
•
For models equipped with automatic intermittent wipers, turn the wipers off.
•
Make sure to follow the instructions indicated on the automated car wash.
•
Keep sufficient distance between the cleaning nozzle and the vehicle body.
•
Take particular care around the windows. Standing too close may cause water to
enter the vehicle interior.
•
Do not spray high pressure water directly into the engine compartment. Instead,
use low pressure water and a mild detergent.
■
Washing the Vehicle
■
Using an Automated Car Wash
■
Using High Pressure Cleaners
1
Do not spray water into the air intake vents. It can
cause a malfunction.
Do not spray water onto the capless unit when the
fuel fill door is open. It can cause damage to the fuel
system or engine.
When using an automated car wash that pulls the
vehicle through with a conveyor, make sure the
transmission in
(
N
position.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 466
Air Intake Vents
Continued
607
uu
Cleaning
u
Exterior Care
Main
tenan
ce
A good coat of automotive body wax helps protect your vehicle’s paint from the
elements. Wax will wear off over time and expose your vehicle’s paint to the
elements, so reapply as necessary.
If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they
may be stained or the coating may peel. Promptly wipe it away using a soft cloth and
clean water.
Wipe using a glass cleaner.
Aluminum is susceptible to deterioration caused by salt and other road
contaminants. When necessary, as early as possible use a sponge and mild detergent
to wipe away these contaminants. Do not use a stiff brush or harsh chemicals
(including some commercial wheel cleaners). These can damage the protective finish
on aluminum alloy wheels, resulting in corrosion. Depending on the type of finish,
the wheels also may lose their luster or appear burnished. To avoid water stains,
wipe the wheels dry with a cloth while they are still wet.
■
Applying Wax
■
Maintaining the Bumpers and Other Resin Coated Parts
■
Cleaning the Window
■
Maintaining Aluminum Wheels
1
NOTICE
Chemical solvents and strong cleaners can damage
the paint, metal, and plastic on your vehicle. Wipe
away spills immediately.
1
Maintaining the Bumpers and Other Resin Coated Parts
Ask a dealer about the correct coating material when
you want to repair the painted surface of the parts
made of resin.
608
uu
Cleaning
u
Exterior Care
Main
tenan
ce
The inside lenses of exterior lights (headlights, brake lights, etc.) may fog temporarily
if you have driven in the rain, or after the vehicle has been run through a car wash.
Dew condensation also may build up inside the lenses when there is a significant
enough difference between the ambient and inside lens temperatures (similar to
vehicle windows fogging up in rainy conditions). These conditions are natural
processes, not structural design problems in the exterior lights.
Lens design characteristics may result in moisture developing on the light lens frame
surfaces. This also is not a malfunction.
However, if you see large amounts of water accumulation, or large water drops
building up inside the lenses, have your vehicle inspected by a dealer.
■
Fogged Exterior Light Lenses
609
Main
tenan
ce
Accessories and Modifications
Accessories
When installing accessories, check the following:
•
Do not install accessories on the windshield. They can obstruct your view and
delay your reaction to driving conditions.
•
Do not install any accessories over areas marked SRS Airbag, on the sides or backs
of the front seats, on front or side pillars, or near the side windows.
Accessories installed in these areas may interfere with proper operation of the
vehicle’s airbags or may be propelled into you or another occupant if the airbags
deploy.
•
Be sure electronic accessories do not overload electrical circuits or interfere with
proper operation of your vehicle.
2
P. 633
•
Before installing any electronic accessory, have the installer contact a dealer for
assistance. If possible, have a dealer inspect the final installation.
1
Honda Genuine accessories are recommended to
ensure proper operation on your vehicle.
3
WARNING
Improper accessories or modifications can
affect your vehicle’s handling, stability, and
performance, and cause a crash in which
you can be seriously hurt or killed.
Follow all instructions in this owner’s
manual regarding accessories and
modifications.
610
uu
Accessories and Modifications
u
Modifications
Main
tenan
ce
Modifications
Do not modify your vehicle in a manner that may affect its handling, stability, or
reliability, or install non-genuine Honda parts or accessories that may have a similar
effect.
Even minor modifications to vehicle systems can affect overall vehicle performance.
Always make sure all equipment is properly installed and maintained, and do not
make any modification to your vehicle or its systems that might cause your vehicle
to no longer meet federal, state, province, territory, and local regulations.
The on-board diagnostic port (OBD-II/SAE J1962 connector) installed on this vehicle
is intended to be used with automobile system diagnostic devices or with other
devices that Honda has approved. Use of any other type of device may adversely
affect the vehicle's electronic systems or allow them to be compromised, possibly
resulting in a system malfunction, drained battery, or other unexpected problems.
Do not modify or attempt to repair any of the electrical components.
611
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
Types of Tools . . . . . . . . .. 612
Changing a Flat Tire . . . . . . . 613
Checking the Engine . . . . . . 621
If the Keyless Remote Battery is Weak .. 622
Emergency Engine Stop . . . . ... 623
How to Handle Overheating. . . . 627
If the Low Oil Pressure Warning Appears ...629
If the Charging System Indicator Comes
On . . . . . . . . . . . . . 629
If the Malfunction Indicator Lamp Comes
On or Blinks . . . . . . . . ... 630
If the Brake System Indicator (Red) Comes
On . . . . . . . . . . . . . 631
If the Electric Power Steering (EPS) System
Indicator Comes On . . . . . ... 631
If the Low Tire Pressure/Tire Pressure
Monitoring System (TPMS) Indicator
Comes On or Blinks. . . . . . 632
If the Transmission System Indicator Blinks
along with the Warning Message . ...632
Fuse Locations . . . . . . . . . 633
Inspecting and Changing Fuses. . 637
If You Cannot Unlock the Fuel Fill Door
Refueling From a Portable Fuel
Container . . . . . . . . ... 640
612
Han
d
lin
g the U
n
expected
Tools
Types of Tools
1
The tools are stored in the cargo area.
Wheel Nut Wrench/
Jack Handle
Jack
Jack Handle Bar
Funnel
613
Continued
Han
d
lin
g the U
n
expected
If a Tire Goes Flat
Changing a Flat Tire
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually
to reduce speed. Then, stop in a safe place. Replace the flat tire with a compact
spare tire. Go to a dealer as soon as possible to have the full-size tire repaired or
replaced.
1.
Park the vehicle on a firm, level, non-slippery surface and apply the parking brake.
2.
Put the transmission into
(
P
.
3.
Turn on the hazard warning lights and set the power mode to VEHICLE OFF
(LOCK).
1
Follow compact spare precautions:
Periodically check the tire pressure of the compact
spare. It should be set to the specified pressure.
Specified Pressure: 60 psi (420 kPa, 4.2 kgf/cm
2
)
When driving with the compact spare tire, keep the
vehicle speed under 50 mph (80 km/h). Replace with
a full-size tire as soon as possible.
The compact spare tire and wheel in your vehicle are
specifically for this model. Do not use them with
another vehicle. Do not use another type of compact
spare tire or wheel with your vehicle.
Do not mount tire chains on a compact spare tire.
If a chain-mounted front tire goes flat, remove one of
the full-size rear tires and replace it with the compact
spare tire. Remove the flat front tire and replace it
with the full-size tire that was removed from the rear.
Mount the tire chains on the front tire.
Do not use a puncture-repairing agent on a flat tire,
as it can damage the tire pressure sensor.
uu
If a Tire Goes Flat
u
Changing a Flat Tire
614
Han
d
lin
g the U
n
expected
1.
Push the rear edge of the handle on the
floor lid and open the lid.
2.
Pull and remove the cover. Take the wheel
nut wrench and jack-handle bar out of the
rear side compartment.
3.
Loosen the strap, then take the jack out.
■
Getting Ready to Replace the Flat Tire
1
NOTICE
Do not use the jack if it doesn’t work properly. Call
your dealer or a professional towing service.
Handle
Cover
Wheel Nut Wrench
Jack
Handle Bar
Strap
Jack
Continued
615
uu
If a Tire Goes Flat
u
Changing a Flat Tire
Han
d
lin
g the U
n
expected
4.
Remove the cover and the rubber plug on
the cargo area lining to access the shaft
for the spare tire hoist.
5.
Put the wheel nut wrench with the jack
handle bar on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
6.
Keep turning the wheel nut wrench to
create slack in the cable.
7.
Remove the bracket from the spare tire.
1
Getting Ready to Replace the Flat Tire
The wheel nut wrench supplied with your vehicle is
specially adapted to fit the hoist shaft. Do not use any
other tool.
Cover
Rubber Plug
Jack
Handle Bar
Wheel Nut Wrench
Bracket
616
uu
If a Tire Goes Flat
u
Changing a Flat Tire
Han
d
lin
g the U
n
expected
8.
Place a wheel block or rock in front and
rear of the wheel diagonal to the flat tire.
9.
Place the compact spare tire (wheel side
up) under the vehicle body, near the tire
that needs to be replaced.
10.
Loosen each wheel nut about one turn
using the wheel nut wrench.
Wheel
Blocks
The tire to be replaced.
Continued
617
uu
If a Tire Goes Flat
u
Changing a Flat Tire
Han
d
lin
g the U
n
expected
1.
Place the jack under the jacking point
closest to the tire to be changed.
2.
Turn the end bracket clockwise as shown in
the image until the top of the jack contacts
the jacking point.
u
Make sure that the jacking point tab is
resting in the jack notch.
3.
Raise the vehicle, using the jack handle bar
and the jack handle, until the tire is off the
ground.
■
How to Set Up the Jack
1
Do not use the jack with people or luggage in the
vehicle.
Use the jack provided in your vehicle.
Other jacks may not support the weight (“load”) or
may not fit the jacking point.
The following instructions must be followed to use
the jack safely:
•
Do not use while the engine is running.
•
Use only where the ground is firm and level.
•
Use only at the jacking points.
•
Do not get in the vehicle while using the jack.
•
Do not put anything on top of or underneath the
jack.
3
WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tire
exactly, and never get under the vehicle
when it is supported only by the jack.
Jacking
Points
Jack Handle Bar
Wheel Nut Wrench as Jack Handle
uu
If a Tire Goes Flat
u
Changing a Flat Tire
618
Han
d
lin
g the U
n
expected
1.
Remove the wheel nuts and flat tire.
2.
Wipe the mounting surfaces of the wheel
with a clean cloth.
3.
Mount the compact spare tire.
4.
Screw the wheel nuts until they touch the
lips around the mounting holes, then stop
rotating.
5.
Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
94 lbf∙ft (127 N∙m, 13 kgf∙m)
■
Replacing the Flat Tire
1
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
Continued
619
uu
If a Tire Goes Flat
u
Changing a Flat Tire
Han
d
lin
g the U
n
expected
1.
Remove the center cap and place the flat
tire face up under the hoist.
2.
Insert the hoist bracket into the center hole
of the flat tire.
3.
Slowly turn the wheel nut wrench clockwise
to take up the hoist cable slack.
Make sure the bracket is seated in the
center hole of the flat tire.
4.
Turn the wheel nut wrench with the jack
handle bar clockwise until the flat tire rests
against the underbody of the vehicle and
you hear the hoist click.
5.
Securely put the jack and wheel nut wrench
back in the tool case. Store the case in the
cargo area.
■
Storing the Flat Tire
1
3
WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the jack and tools securely before
driving.
Center Cap
Wheel Nut Wrench
Jack Handle
Bar
uu
If a Tire Goes Flat
u
Changing a Flat Tire
620
Han
d
lin
g the U
n
expected
If you replace a flat tire with the spare tire, the low tire pressure/TPMS indicator
comes on while you are driving. After driving for a few miles (kilometers), the
indicator will start blinking for a short time and then stay on.
Tire Pressure
Monitor Problem
appears on the driver information interface, but this is normal.
If you replace the tire with a specified regular tire, the warning message on the
driver information interface and the low tire pressure/TPMS indicator will go off after
a few miles (kilometers).
■
TPMS with Tire Fill Assist and the Compact Spare Tire
1
TPMS with Tire Fill Assist and the Compact Spare Tire
The system cannot monitor the pressure of the spare
tire. Manually check the spare tire pressure to be sure
that it is correct.
Use the TPMS specific wheels. Each is equipped with
a tire pressure sensor mounted inside the tire behind
the valve stem.
621
Han
d
lin
g the U
n
expected
Engine Does Not Start
Checking the Engine
If the engine does not start, check the starter.
Starter condition
Checklist
Starter doesn’t turn or turns
over slowly.
The battery may be dead. Check
each of the items on the right and
respond accordingly.
Check for a message on the driver information interface.
●
If the
To Start, Hold Remote Near Start Button
message appears
2
If the Keyless Remote Battery is Weak
P. 622
u
Make sure the keyless remote is in its operating range.
2
ENGINE START/STOP Button Operating Range
Check the brightness of the interior lights.
Turn on the interior lights and check the brightness.
●
If the interior lights are dim or do not come on at all
2
●
If the interior lights come on normally
2
The starter turns over normally
but the engine doesn’t start.
There may be a problem with a
fuse. Check each of the items on
the right and respond accordingly.
Review the engine start procedure.
Follow its instructions, and try to start the engine again.
2
Check the immobilizer system indicator.
When the immobilizer system indicator is blinking, the engine cannot be started.
2
Check the fuel level.
There should be enough fuel in the tank.
2
Check the fuses.
Check all fuses, or have the vehicle checked by a dealer.
2
P. 637
If the problem continues:
2
P. 638
1
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
2
P. 624
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст