Honda Insight (2019 year). Instruction — part 11
159
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Door Setup
Auto Door Lock
Changes the setting for when the doors
automatically lock.
With Vehicle Speed
*1
/Shift
From P/OFF
Auto Door Unlock
Changes the setting for when the doors
automatically unlock.
All Doors When Driver’s
Door Opens
*1
/All Doors
When Shifted To Park/All
Doors When Ignition
Switched OFF/OFF
Key And Remote Unlock
Mode
Sets up either the driver’s door or all doors to unlock
on the first operation of the remote or built-in key.
Driver Door
*1
/All Doors
Keyless Lock Answer
Back
LOCK/UNLOCK- The exterior lights flash.
LOCK (2nd push)- The beeper sounds.
ON
*1
/OFF
Security Relock Timer
Changes the time it takes for the doors to relock and
the security system to set after you unlock the
vehicle without opening any door.
90sec/60sec/30sec
*1
160
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Maintenance
Reset
—
Resets the engine oil life display when you have
performed the maintenance service.
Cancel/All Due Items/Item #
Only (#: A, B, 1, 2, 3, 4, 5, 7)
Default All
—
Cancels/Resets all the customized settings as
default.
Cancel/Set
161
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
■
Example of customization settings
The steps for changing the “Trip A” Reset Timing setting to When Refueled are
shown below. The default setting for “Trip A” Reset Timing is Manually Reset.
1. Roll the multi-function steering-wheel
controls to select Vehicle Settings, then
push the left selector wheel.
2. Roll the multi-function steering-wheel
controls until Meter Setup appears on the
display.
3. Push the left selector wheel.
u
Language Selection appears first on
the display.
162
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
4. Roll the left selector wheel until “Trip A”
Reset Timing appears on the display, then
push the left selector wheel.
u
The display switches to the
customization setup screen, where you
can select When Refueled, IGN Off,
Manually Reset, or Exit.
5. Roll the left selector wheel and select
When Refueled, then push the left
selector wheel.
u
The When Refueled Setup screen
appears, then the display returns to the
customization menu screen.
6. Roll the left selector wheel until Exit
appears on the display, then push the left
selector wheel.
7. Repeat Step 6 until you return to the
normal screen.
163
Controls
This chapter explains how to operate the various controls necessary for driving.
Clock . . . . . . . . . . . . .. 164
Locking and Unlocking the Doors
Key Types and Functions . . . . .. 166
Low Remote Signal Strength . . . 168
Locking/Unlocking the Doors from the
Outside . . . . . . . . . . .. 169
Locking/Unlocking the Doors from the
Inside . . . . . . . . . . . . 176
Childproof Door Locks . . . . . . 178
Auto Door Locking/Unlocking . . .. 179
Opening and Closing the Trunk. ... 180
Security System
Immobilizer System . . . . . . .. 183
Security System Alarm. . . . . .. 184
Opening and Closing the Windows ... 186
Moonroof
Operating the Switches Around the
POWER Button. . . . . . . . . 190
Turn Signals . . . . . . . . . . 193
Light Switches. . . . . . . . .. 193
Fog Lights
Daytime Running Lights . . . . ... 196
Auto High-Beam . . . . . . . .. 197
Wipers and Washers . . . . . . 200
Rear Defogger/Heated Door Mirror
Button . . . . . . . . . . 202
Brightness Control . . . . . . ... 203
Adjusting the Steering Wheel . . .. 204
Interior Rearview Mirror . . . . ... 205
Power Door Mirrors . . . . . . . 206
Adjusting the Seats . . . . . . .. 207
Interior Lights/Interior Convenience
Items . . . . . . . . . . . . 215
Using Automatic Climate Control . 225
Automatic Climate Control Sensors... 231
* Not available on all models
164
Co
ntrols
Clock
Adjusting the Clock
You can adjust the time manually in the audio/information screen, with the power
mode in ON.
■
Using the MENU/CLOCK button
1. Press and hold the MENU/CLOCK button.
u
Adjust Clock is selected.
2. Rotate
to change hour, then press
.
3. Rotate
to change minute, then press
.
4. To enter the selection, rotate
and select
Set, then press
.
■
Adjusting the Time
1
The clock is automatically updated through the audio
system.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
2 Customized Features P. 359, 366
Models with Display Audio
Models with color audio
1
These indications are used to show how to operate
the selector knob.
Rotate
to select.
Press
to enter.
165
uu
Clock
u
Adjusting the Clock
Co
ntrols
■
Using the Settings menu on the audio/
information screen
1. Press the
, then select Settings.
2. Select System.
3. Select Day & Time.
4. Select Set Date & Time.
5. Select Automatic Date & Time, then
select OFF.
To adjust time:
6. Select Set Time.
7. Selecting /
.
8. Select Save to set the time.
To adjust date:
6. Select Set Date.
7. Selecting /
.
8. Select Save to set the date.
1
Using the Settings menu on the audio/information screen
You can also adjust the clock by touching the clock
displayed on the upper right corner of the display or
the Clock icon on the home screen.
1. Touch the clock on the display.
The clock screen of the select face-type appears.
2. Select Settings.
3. Select Day & Time.
4. Select Set Date & Time.
5. Select Automatic Date & Time, then select OFF.
6. Select Set Date or Set Time.
7. Adjusting the dates, hours and minutes by
selecting /
.
8. Select Save to set the time.
You can customize the date display to MM/DD/
YYYY, DD/MM/YYYY or YYYY/MM/DD.
2 Customized Features P. 366
3 4
Models with Display Audio
3 4
3 4
166
Co
ntrols
Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:
Use the keys to turn on and off the power
system, and to lock and unlock all the doors
and to open the trunk.
You can also use the remote transmitter to
lock and unlock all the doors and to open the
trunk.
1
All the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
theft.
Follow the advice below to prevent damage to the
keys:
•
Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity.
•
Do not drop the keys or set heavy objects on them.
•
Keep the keys away from liquids, dust and sand.
•
Do not take the keys apart except for replacing the
battery.
If the circuits in the keys are damaged, the power
system may not activate, and the remote transmitter
may not work.
If the keys do not work properly, have them
inspected by a dealer.
You can remotely turn the power system on using the
remote.
2 Remote Engine Start with Vehicle
Models with remote engine starter
Models without smart entry system
Models with smart entry system and
remote engine starter
* Not available on all models
167
uu
Locking and Unlocking the Doors
u
Key Types and Functions
Co
ntrols
The built-in key can be used to lock/unlock the
doors when the remote battery becomes
weak and the power door lock/unlock
operation is disabled.
To remove the built-in key, slide the release
knob and then pull out the key. To reinstall
the built-in key, push the built-in key into the
remote until it clicks.
Contains a number that you will need if you
purchase a replacement key.
■
Built-in Key
Built-in Key
Release Knob
■
Key Number Tag
1
Keep the key number tag separate from the key in a
safe place outside of your vehicle.
If you wish to purchase an additional key, contact a
dealer.
If you lose your key and you cannot activate the
power system, contact a dealer.
168
uu
Locking and Unlocking the Doors
u
Low Remote Signal Strength
Co
ntrols
Low Remote Signal Strength
The vehicle transmits radio waves to locate the remote when locking/unlocking the
doors
*
, opening the trunk
*
, or to activate the power system.
In the following cases, locking/unlocking the doors
*
, opening the trunk
*
, or
activating the power system may be inhibited or operation may be unstable:
• Strong radio waves are being transmitted by nearby equipment.
• You are carrying the remote together with telecommunications equipment,
laptop computers, cell phones, or wireless devices.
• A metallic object is touching or covering the remote.
1
Communication between the remote and the vehicle
consumes the remote’s battery.
Battery life is about two years, but this varies
depending on regularity of use.
The battery is consumed whenever the remote is
receiving strong radio waves. Avoid placing it near
electrical appliances such as televisions and personal
computers.
* Not available on all models
169
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
Continued
Co
ntrols
Locking/Unlocking the Doors from the Outside
When you carry the remote, you can lock/
unlock the doors and open the trunk.
You can lock/unlock the doors within a radius
of about 32 inches (80 cm) of the outside door
handle. You can open the trunk within about
32 inches (80 cm) radius from the trunk
release button.
■
Locking the doors
Touch the door lock sensor on the front door.
u
Some exterior lights flash; the beeper
sounds; all the doors lock; and the
security system sets.
■
Using the Smart Entry with Push Button Start System
*
1
Locking/Unlocking the Doors from the Outside
If the interior light switch is in the door activated
position, the interior light comes on when you unlock
the doors.
No doors opened: The light fades out after 30
seconds.
Doors relocked: The light goes off immediately.
2 Interior Lights P. 215
Door Lock Sensor
1
Using the Smart Entry with Push Button Start System
If you do not open a door within 30 seconds of
unlocking the vehicle with the smart entry system,
the doors will automatically relock.
You can lock or unlock doors using the smart entry
system only when the power mode is in VEHICLE OFF.
* Not available on all models
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
170
Co
ntrols
■
Unlocking the doors and trunk
Grab the driver’s door handle:
u
The driver’s door unlocks.
u
Some exterior lights flash twice and the
beeper sounds twice.
Grab the front passenger’s door handle:
u
All doors unlock.
u
Some exterior lights flash twice and the
beeper sounds twice.
Press the trunk release button:
u
The trunk unlocks and opens.
u
Some exterior lights flash twice and the
beeper sounds.
2 Using the Trunk Release Button
Trunk Release Button
1
Using the Smart Entry with Push Button Start System
•
Do not leave the remote in the vehicle when you
get out. Carry it with you.
•
Even if you are not carrying the remote, you can
lock/unlock the doors while someone else with the
remote is within range.
•
The door may be unlocked if the door handle is
covered with water in heavy rain or in a car wash if
the remote is within range.
•
If you grip a front door handle or touch a door lock
sensor wearing gloves, the door sensor may be
slow to respond or may not respond by locking or
unlocking the doors.
•
After locking the door, you have up to two seconds
during which you can pull the door handle to
confirm whether the door is locked. If you need to
unlock the door immediately after locking it, wait
at least two seconds before gripping the handle,
otherwise the door will not unlock.
•
The door might not open if you pull it immediately
after gripping the door handle. Grip the handle
again and confirm that the door is unlocked before
pulling the handle.
•
Even within the 32 inches (80 cm) radius, you may
not be able to lock/unlock the doors with the
remote if it is above or below the outside handle.
•
The remote may not operate if it is too close to the
door and door glass.
The light flash, beep and door unlock mode settings
can be customized using the audio/information
screen.
2 Customized Features P. 366
* Not available on all models
Continued
171
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
Co
ntrols
■
Locking the doors (Walk away auto
lock®)
When you walk away from the vehicle while
carrying the remote, the doors will
automatically lock.
The auto lock function activates when all
doors are closed, and the remote is within
about 5 feet (1.5 m) radius of the outside door
handle.
Exit vehicle while carrying remote and close
door(s).
1. While within about 5 feet (1.5 m) radius of
the vehicle.
u
The beeper sounds; the auto lock
function will be activated.
2. Carry the remote beyond about 5 feet
(1.5 m) from the vehicle and remain outside
this range for 2 or more seconds.
u
Some exterior lights flash; the beeper
sounds; all doors will then lock.
1
Locking the doors (Walk away auto lock®)
The auto lock function is set to OFF as the factory
default setting. The auto lock function can be set to
ON using the audio/information screen.
If you set the auto lock function to ON using the
audio/information screen, only the remote that was
used to unlock the driver’s door prior to the setting
change can activate auto lock.
2 Customized Features P. 366
After the auto lock function has been activated,
when you stay within the locking/unlocking
operation range, the indicator on the remote will
continue to flash until the doors are locked.
When you stay beside the vehicle within the
operation range, the doors will automatically lock
approximately 30 seconds after the auto lock
function activating beeper sounds.
When you open a door after the auto lock function
activating beeper sounds, the auto lock function will
be delayed until all doors are closed.
Under the following circumstances, the auto lock
function will not activate:
•
The remote is inside the vehicle.
•
The remote is taken out of its operational range
before all the doors are closed.
u
The beeper will not sound.
u
The beeper will sound.
The activation range of
the auto lock function is
about 5 feet (1.5 m)
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
172
Co
ntrols
To temporarily deactivate the function:
1. Set the power mode to OFF.
2. Open the driver’s door.
3. Using the master door lock switch, operate
the lock as follows:
Lock
Unlock
Lock
Unlock.
u
The beeper sounds and the function is
deactivated.
To restore the function:
• Set the power mode to ON.
• Lock the vehicle without using the auto lock
function.
• With the remote on you, move out of the
auto lock function operation range.
• Open any door.
1
Locking the doors (Walk away auto lock®)
The auto lock function does not operate when any of
the following conditions are met.
•
The remote is inside the vehicle.
•
A door or the hood is not closed.
•
The power mode is set to any mode other than
OFF.
•
The remote is not located within a radius of about
5 feet (1.5 m) from the vehicle when you get out of
the vehicle and close the doors.
Auto lock function operation stop beeper
After the auto lock function has been activated, the
auto lock operation stop beeper sounds for
approximately two seconds in the following cases.
•
The remote is put inside the vehicle through a
window.
•
You are located too close to the vehicle.
•
The remote is put inside the trunk.
If the warning beeper sounds, check that you are
carrying the remote. Then, open/close a door and
confirm the auto lock activation beeper sounds once.
Continued
173
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
Co
ntrols
■
Locking the doors
Press the lock button.
Once:
u
Some exterior lights flash, all the doors
lock, and the security system sets.
Twice (within five seconds after the first
push):
u
The beeper sounds and verifies the
security system is set.
■
Unlocking the doors
Press the unlock button.
Once:
u
Some exterior lights flash twice, and the
driver’s door unlocks.
Twice:
u
The remaining doors unlock.
■
Using the Remote Transmitter
1
If you do not open a door within 30 seconds of
unlocking the vehicle with the remote transmitter,
the doors will automatically relock.
You can change the relock timer setting.
2 Customized Features P. 153, 366
You can lock or unlock doors using the remote
transmitter only when the power mode is in VEHICLE
OFF.
The remote transmitter uses low-power signals, so
the operating range may vary depending on the
surroundings.
The remote will not lock the vehicle when a door is
open.
If the distance at which the remote transmitter works
varies, the battery is probably low.
If the LED does not come on when you press a
button, the battery is dead.
2 Replacing the Button Battery P. 593
You can customize the door unlock mode setting.
2 Customized Features P. 153, 366
LED
Unlock Button
Lock Button
uu
Locking and Unlocking the Doors
u
Locking/Unlocking the Doors from the Outside
174
Co
ntrols
If the lock or unlock button of the remote does not work, use the key instead.
2 Replacing the Button Battery P. 593
Fully insert the key and turn it.
■
Locking/Unlocking the Doors Using a Key
1
Locking/Unlocking the Doors Using a Key
When you lock the driver’s door with a key, all the
other doors lock at the same time. When unlocking,
the driver’s door unlocks first. Turn the key a second
time within a few seconds to unlock the remaining
doors.
You can customize the door unlock mode setting.
2 Customized Features P. 153, 366
Lock
Unlock
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст