Honda Insight (2019 year). Instruction — part 10
143
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Shows the traffic sign recognition system.
2 Traffic Sign Recognition System P. 522
■
Traffic Sign Recognition System
uu
Gauges and Driver Information Interface
u
Driver Information Interface
144
In
strum
e
nt Pa
nel
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select Driver Attention on the
driver information interface, bars on it light up
in white to indicate the degree of the driver’s
attention.
2 Accessing contents in the main display
P. 131
■
Driver Attention Monitor
1
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information
Interface
Left Selector
Wheel
(home) Button
Level
145
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
If two bars light up, the Driver Attention
Level Low message will appear.
If one bar lights up, the Driver Attention
Level Low. Time For A Break message will
appear, a beep will sound, and the steering
wheel will vibrate.
If this message appears, stop in a safe location
and rest for as long as needed.
The message will disappear when the left
selector wheel is pressed or when the system
has determined that the driver is driving
normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the message will appear again after
approximately 15 minutes, accompanied by a
beep and steering wheel vibrations.
The message does not appear when the
traveling time is 30 minutes or less.
uu
Gauges and Driver Information Interface
u
Driver Information Interface
146
In
strum
e
nt Pa
nel
■
The Driver Attention Monitor resets when:
• The power mode is set to VEHICLE OFF.
• The driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function:
• The vehicle must be traveling above 25 mph (40 km/h).
• The electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2 Lane Keeping Assist System (LKAS) P. 509
• The condition of the road is poor, e.g. the surface is unpaved or bumpy.
• It is windy.
• The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select Tactile and Audible
Alert
*1
/Tactile And Audible Alert
*2
, Tactile Alert, or Off
*1
/OFF
*2
.
2 Customized Features P. 366
*1 : Models with color audio
*2 : Models with Display Audio
1
For the Driver Attention Monitor to function:
The bars on the driver information interface remain
grayed out unless the Driver Attention Monitor is
functioning.
Continued
147
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
Shows the distance between your vehicle and
the vehicle detected ahead.
Informs you whether ACC with LSF and/or
LKAS is activated or not. If ACC with LSF is
activated, the set following interval is
displayed. If LKAS is activated, the displayed
lane marks change to indicate that LKAS is
activated.
2 Adaptive Cruise Control (ACC) with Low
2 Lane Keeping Assist System (LKAS) P. 509
■
Driving Support Information
1
In case ACC with LSF is not activated, when the
distance between your vehicle and the vehicle ahead
becomes to small, the section behind the vehicle icon
turns amber and alerts you.
Amber gradation
Icon of vehicle ahead
Distance of vehicle ahead
When ACC and LKAS is in On
Set Vehicle Interval
ACC on: The section behind the
vehicle icon turns green.
LKAS on: The lane outlines
appear on the display.
LKAS starts: The lane lines
change to solid ones.
LKAS suspend: The lane lines
change to dotted ones.
uu
Gauges and Driver Information Interface
u
Driver Information Interface
148
In
strum
e
nt Pa
nel
Indicates the state of RDM and CMBS
TM
, such as On, Off, or Failure, by color and
letters.
The following colors indicate the state of any of the above mentioned systems:
• Green: The system is on.
• Gray: The system is off.
• Amber: There is a problem with the system.
■
Safety Support
1
If a system is indicated by the color amber, have your
vehicle checked by a dealer immediately.
To turn on or off each system, first rotate the left
selector wheel to switch displays. From the next
display you can select which system to turn on or off.
2 RDM On and Off P. 519
2 CMBS
On and Off P. 486
You can also confirm the state of the each function
by the color of the safety support indicator.
2 Safety Support Indicator (Amber) P. 99
2 Safety Support Indicator (Green/Gray)
P. 101
Area Info for CMBS
TM
CMBS
TM
Icon
and State Info
RDM Icon and
State Info
Area Info
for RDM
149
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Shows the average fuel economy for the last
three driving cycles (1-3), and the current
driving cycle (0) in mpg or l/100 km.
Each time you set the power mode to ON, the
display is updated, and the oldest record is
deleted.
■
Average Fuel Economy Records
uu
Gauges and Driver Information Interface
u
Driver Information Interface
150
In
strum
e
nt Pa
nel
■
Eco Drive Display
The vehicle icon on the display moves forward or backward while driving.
The more aggressive the acceleration is, the further the icon moves forward.
The more aggressive the deceleration is, the further the icon moves backward.
Keep the icon near the center of the circle for better fuel economy while driving.
■
Eco Drive Display/Drive Cycle Score/Lifetime Points
1
Switch between the average fuel economy A and
average fuel economy B by rolling the left selector
wheel.
Aggressive
Deceleration
Fuel-Efficient
Driving
Aggressive
Acceleration
Moderate
Deceleration
Moderate
Acceleration
Average Fuel
Economy
Vehicle Icon
151
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
■
Drive Cycle Score/Lifetime Points
Appear for a few seconds when you set the power mode to VEHICLE OFF. Each has
three stages. Depending on your driving style, the leaf icon(s) and the gauge
increase or decrease to indicate that you have reached a different stage of fuel
economy.
■
Resetting the Drive Cycle Score
1. Make sure the shift position is in
(
P. Turn the power mode to ON.
2. If ECON mode is on, press the ECON button to turn it off.
3. Turn the power mode to VEHICLE OFF.
4. Turn the power mode to ON again.
u
Make sure to complete steps from 4 through 6 within 30 seconds.
5. Depress the brake pedal twice.
u
The color of the ambient meter will change from white to green.
u
When the Fuel Efficiency Backlight setting on the audio/information screen
is off, the color stays white.
6. Press the ECON button twice.
u
The color of the ambient meter will turn to monochrome.
7. Turn the power mode to VEHICLE OFF.
Drive Cycle Score
Lifetime Points
Advancing
to 2nd
Stage
Advancing
to 3rd
Stage
Receding
to 3rd
Stage
Receding
to 2nd
Stage
uu
Gauges and Driver Information Interface
u
Driver Information Interface
152
In
strum
e
nt Pa
nel
Displays the power flow of the motor and engine, indicating the vehicle’s power
source and whether the battery is being charged.
■
Power Flow Monitor
1
While the vehicle is stationary with the engine
running, the following may appear on the driver
information interface.
Engine ON
Engine OFF
Power Flow
Engine
Power is supplied
by the motor and
the engine.
Hybrid (HV)
Power is supplied
by the motor.
Electric Vehicle (EV)
Power is being supplied to
charge the High Voltage
battery and supply power
to the wheels.
Engine (Direct Drive)
The motor is
charging the High
Voltage battery.
Regeneration
Power is being
supplied by only
the engine.
The engine is running
and the motor is
charging the High
Voltage battery.
Continued
153
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
Use the driver information interface to customize certain features.
■
How to customize
Select the Vehicle Settings screen by rolling the left selector wheel while the power
mode is in ON, and the vehicle is at a complete stop. Push the left selector wheel.
■
Customized Features
*
1
To customize other features, roll the left selector
wheel.
2 List of customizable options P. 156
2 Example of customization settings P. 161
Put the transmission into
(
P before you attempt to
change any customized setting.
Left selector wheel
Roll: Changes the
customize menus and
items.
Push: Enter the selected
item.
Driver Information Interface:
Goes to Vehicle Settings.
* Not available on all models
154
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
Customization flow
Roll the left selector wheel to select Vehicle Settings and push the left selector wheel.
Vehicle Settings
“Trip A” Reset Timing
Language Selection
Adjust Outside Temp. Display
Door Unlock Mode
Driver Assist System Setup
Meter Setup
Keyless Access Setup
“Trip B” Reset Timing
Forward Collision Warning Distance
ACC Forward Vehicle Detect Beep
Road Departure Mitigation Setting
Push
Traffic Sign Recognition System
Driver Attention Monitor
Roll
Keyless Access Beep
Push
Keyless Access Light Flash
Roll
Speed/Distance Units
Lane Keeping Assist Suspend Beep
Adjust Alarm Volume
Roll
Roll
Roll
Push
Push
Push
Roll
Roll
Reverse Alert Tone
Fuel Efficiency Backlight
TPMS Calibration
Roll
155
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Exit
Door Setup
Default All
Lighting Setup
Key And Remote Unlock Mode
Auto Door Lock
Auto Door Unlock
Keyless Lock Answer Back
Security Relock Timer
Interior Light Dimming Time
Headlight Auto OFF Timer
Auto Headlight ON With Wiper ON
Roll
Push
Push
Roll
Roll
Roll
Roll
Push
Maintenance Reset
Roll
Roll
Roll
Auto Light Sensitivity
Auto Interior Illumination Sensitivity
156
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
List of customizable options
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
TPMS
Calibration
—
Cancels/Calibrates the tire pressure monitoring
system (TPMS).
Calibrate/Cancel
Driver Assist
System Setup
Forward Collision
Warning Distance
Changes Collision Mitigation Braking System
(CMBS
TM
) alert distance.
Long/Normal
*1
/Short
ACC Forward Vehicle
Detect Beep
Causes the system to beep when the system detects
a vehicle, or when the vehicle goes out of the ACC
with LSF range.
ON/OFF
*1
Road Departure
Mitigation Setting
Changes the setting for the road departure
mitigation system.
Narrow/Normal
*1
/Wide/
Warning Only
Lane Keeping Assist
Suspend Beep
Causes the system to beep when the Lane Keeping
Assist System (LKAS) is suspended.
ON/OFF
*1
Traffic Sign Recognition
System
Select On/Off to indicate small displaying traffic sign
icon on the driver information interface.
Small Icons ON
*1
/Small Icons
OFF
Driver Attention
Monitor
Changes the setting for the driver attention
monitor.
Tactile Alert/Tactile And
Audible Alert
*1
/OFF
157
uu
Gauges and Driver Information Interface
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
*1:Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Meter Setup
Language Selection
Changes the displayed language.
English
*1
/Français/Español
Adjust Outside Temp.
Display
Adjusts the temperature reading by a few degrees.
-5°F ~ ±0°F
*1
~ +5°F
“Trip A” Reset Timing
Changes the setting of how to reset trip meter A,
average fuel economy A, average speed A, and
elapsed time A.
When Refueled/IGN Off/
Manually Reset
*1
“Trip B” Reset Timing
Changes the setting of how to reset trip meter B,
average fuel economy B, average speed B, and
elapsed time B.
When Refueled/IGN Off/
Manually Reset
*1
Adjust Alarm Volume
Changes the alarm volume, such as buzzers,
warnings, turn signal sound, and so on.
High/Mid
*1
/Low
Reverse Alert Tone
Turns the reverse alert tone on and off.
ON
*1
/OFF
Fuel Efficiency Backlight
Turns the ambient meter feature on and off.
ON
*1
/OFF
Speed/Distance Units
Selects the trip computer units.
km/h∙km/mph∙miles
*1
158
uu
Gauges and Driver Information Interface
u
Driver Information Interface
In
strum
e
nt Pa
nel
*1: Default Setting
Setup Group
Customizable Features
Description
Selectable Settings
Keyless
Access Setup
Door Unlock Mode
Changes which doors unlock when you grab the
driver’s door handle.
Driver’s Door Only
*1
/All
Doors
Keyless Access Light
Flash
Causes some exterior lights to flash when you
unlock/lock the doors.
ON
*1
/OFF
Keyless Access Beep
Causes the beeper to sound when you unlock/lock
the doors.
ON
*1
/OFF
Lighting
Setup
Interior Light Dimming
Time
Changes the length of time the interior lights stay
on after you close the doors.
60sec/30sec
*1
/15sec
Headlight Auto OFF
Timer
Changes the length of time the exterior lights stay
on after you close the driver’s door.
60sec/30sec/15sec
*1
/0sec
Auto Light Sensitivity
Changes the timing for the headlights to come on.
Max/High/Mid
*1
/Low/Min
Auto Interior
Illumination Sensitivity
Changes the sensitivity of the brightness of the
instrument panel when the headlight switch is in
AUTO.
Max/High/Mid
*1
/Low/Min
Auto Headlight ON
With Wiper ON
Used to automatically come on the headlights when
the wipers are used several times within a certain
number of intervals with the headlight switch is in
AUTO.
ON
*1
/OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст