Honda CR-V (2022 year). Manual in english — page 9
141
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the speed of the vehicle is too high
for you to set ACC.
•
Reduce the speed, then set ACC.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
•
Appears when ACC is cancelled due to excessive
high vehicle speed.
•
Reduce the speed, then reset ACC.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
•
Appears when the speed of the vehicle is too low for
you to set ACC.
•
Raise the speed, then set ACC.
2
•
Appears when ACC is cancelled due to excessive low
vehicle speed.
•
Raise the speed, then reset ACC.
2
•
Appears when the vehicle ahead of you resumes
driving, after your vehicle has been stopped
automatically by ACC.
•
Press the
RES/+
or
−/SET
button or depress the
accelerator pedal to resume.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
Manual transmission models
Manual transmission models
Continuously variable
transmission models
142
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the shift lever is moved into any
position other than
(
D
or
(
S
while ACC is in
operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
•
Appears when pressing the
–/SET
button while the
shift lever is in any position other than
(
D
or
(
S
.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
•
Appears when the vehicle is stopped on a very steep
slope while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
•
Appears when pressing the
–/SET
button while the
vehicle is stopped on a very steep slope.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
•
Appears when the parking brake is applied
automatically while ACC is in operation.
•
ACC has been automatically cancelled.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
•
Appears when pressing the
–/SET
button while the
parking brake is applied.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
Continuously variable
transmission models
Continuously variable
transmission models
Continuously variable
transmission models
143
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when pressing the
–/SET
button while the
vehicle is moving and the brake pedal is depressed.
•
ACC cannot be set.
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
•
Appears if ACC is cancelled while your vehicle is
automatically stopped by ACC.
•
Immediately depress the brake pedal.
•
Flashes when the system senses a likely collision with
a vehicle in front of you. The beeper sounds.
•
Take appropriate action to prevent a collision (apply the
brakes, change lanes, etc.)
2
Adaptive Cruise Control (ACC) with Low Speed
Follow (LSF)
2
2
Collision Mitigation Braking System (CMBS)
Continuously variable
transmission models
Continuously variable
transmission models
144
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears if the vehicle is about to veer out of the
detected lane.
•
Take direct control of the steering and keep the vehicle
in the centre of the lane. The message will disappear
after a while.
2
Lane Keeping Assist System (LKAS)
P. 601
2
Road Departure Mitigation System
•
Appears if the driver is merely resting his or her
hands on the steering wheel or is not holding the
steering wheel at all and the vehicle is about to veer
out of the detected lane. A beeper will also sound.
•
Take direct control of the steering and keep the vehicle
in the centre of the lane. The message will disappear
after a while.
2
Lane Keeping Assist System (LKAS)
P. 601
•
Blinks if the driver is merely resting his or her hands
on the steering wheel or is not holding the steering
wheel at all. A beeper will also sound. If the driver
continues to drive in this manner, the beeper will
turn to a single long beep and LKAS will be
deactivated.
•
Take direct control of the steering; the message will
disappear.
2
Lane Keeping Assist System (LKAS)
P. 601
•
Appears when the vehicle is likely to drive out of a
detected lane.
The Road Departure Mitigation system also steers
the vehicle to help you remain within your driving
lane.
•
Take direct control of the steering and keep the vehicle
in the centre of the lane. The message will disappear
after a while.
2
Road Departure Mitigation System
(Amber)
(Red)
(White)
145
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
e
nt Pa
nel
Message
Condition
Explanation
•
Appears when the LKAS is in operation, or the LKAS
button is pressed, but there is a problem with a
system related to the LKAS. The LKAS cancels
automatically. The beeper sounds simultaneously.
•
If any other system indicators come on, such as the
VSA, ABS and brake system, take appropriate action.
2
Message
Condition
Explanation
•
Appears when there is a problem with the power
tailgate system.
•
Manually open or close the power tailgate.
•
Have your vehicle checked by a dealer.
Message
Condition
Explanation
•
Appears if there is a problem with the real time AWD
with intelligent control system.
•
The engine drives the front wheels only in this state.
Have your vehicle checked by a dealer.
•
Appears when the differential temperature is too
high.
•
Stop in a safe place, change to
(
P
, and idle the engine
until the message disappears. If the message does not
disappear, have your vehicle checked by a dealer.
2
Real Time AWD with Intelligent Control System
P. 546
Models with power tailgate
Models with real time AWD with intelligent control system
* Not available on all models
146
In
strum
e
nt Pa
nel
Gauges and Displays
Gauges
Gauges include the speedometer, tachometer, fuel gauge, and related indicators.
They are displayed when the ignition switch is in ON
(
w
*1
.
Displays your driving speed in km/h or mph.
Shows the number of engine revolutions per minute.
Displays the amount of fuel left in the fuel tank.
Displays the temperature of the engine coolant.
*1: Models with the keyless access system have an
ENGINE START/STOP
button instead of an
ignition switch.
■
Speedometer
■
Tachometer
■
Fuel Gauge
■
Temperature Gauge
1
Press the
(display/information) button
repeatedly until the
icon is shown on the driver
information interface. Press
ENTER
, then press and
hold it again. The speedometer reading and the
displayed measurements will switch between km/h
and mph.
1
NOTICE
You should refuel when the reading approaches
(
0
.
Running out of fuel can cause the engine to misfire,
damaging the catalytic converter.
The actual amount of remaining fuel may differ from
the fuel gauge reading.
1
NOTICE
Driving with the temperature gauge pointer in the
upper zone can cause serious engine damage. Pull
safely to the side of the road and allow engine
temperature to return to normal.
2
147
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Driver Information Interface
The driver information interface shows the odometer, trip meter, outside
temperature indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.
■
Main displays
Press the
(display/information) button, and then press
or
to change the
display. Press
ENTER
to see detailed information.
■
Switching the Display
Press ,
or
.
Press
ENTER
.
Range &
Fuel
Navigation
*
& Compass
*
Average
Speed &
Elapsed Time
Audio
*
Phone
*
Warning
Messages
Speed Alarm
Speed Unit &
Disp OFF
Rear Seat
Belt
Reminder
Traffic Sign
Recognition
System
Service Reminder
System
*
/Oil
Monitor System
*
(Display/Information)
Button
Vehicle
Settings
*
Driver
Attention
Monitor
AWD Torque
Distribution
Monitor
*
* Not available on all models
148
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
Trip computer
Press the
(
TRIP
) knob to change the display.
Shows the total number of kilometres or miles that your vehicle has accumulated.
■
Odometer
Odometer
Outside Temperature
Trip A
Trip B
(
TRIP
)
Knob
Continued
149
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
Shows the total number of kilometres or miles driven since the last reset. Meters A
and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the
knob. The trip meter is
reset to
0.0
.
Shows the estimated average fuel economy of each trip meter in l/100 km or mpg.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your previous trips.
Shows the time elapsed since the last time Trip A or Trip B was reset.
Shows the average speed in km/h or mph since the last time Trip A or Trip B was
reset.
■
Trip Meter
■
Average Fuel Economy
■
Range
■
Elapsed Time
■
Average Speed
1
Switch between trip meter A and trip meter B by
pressing the
knob.
1
You can change when to reset the average fuel
economy.
2
P. 157, 408
1
You can change when to reset the elapsed time.
2
P. 157, 408
1
You can change when to reset the average speed.
2
P. 157, 408
uu
Gauges and Displays
u
Driver Information Interface
150
In
strum
e
nt Pa
nel
Shows the instant fuel economy as a bar graph in l/100 km or mpg.
Shows the service reminder system.
2
Show the oil monitor system.
2
Appears when any of the rear seat belts are latched or unlatched.
Shows the outside temperature in Celsius.
If the outside temperature has been below 3°C at the time you turn the ignition
switch to ON
(
w
*1
, the outside temperature indicator blinks for ten seconds.
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±3°C if the temperature reading seems
incorrect.
*1: Models with the keyless access system have an
ENGINE START/STOP
button instead of an
ignition switch.
■
Instant Fuel Economy Gauge
■
Service Reminder System
*
■
Oil Monitor System
*
■
Rear Seat Belt Reminder
■
Outside Temperature
1
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 30 km/h (19 mph).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the driver information interface or audio/
information screen’s customized features to correct
the temperature.
2
P. 157, 408
* Not available on all models
Continued
151
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
The Driver Attention Monitor analyses steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention in the Driver Information Interface.
When the
(display/information) button
is pressed, bars in the Driver Information
Interface light up in white to indicate the
degree of the driver’s attention.
2
P. 147
■
Driver Attention Monitor
1
The Driver Attention Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information
Interface
ENTER
(Display/
Information) Button
Level
152
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
If the number of bars drops to two, the Driver
Attention Monitor will display the white
coffee cup (without the bars) to warn the
driver that his or her attention level is low.
If the number of bars drops to one, a beep will
sound, the steering wheel will vibrate, and the
coffee cup will turn to amber to warn the
driver that he or she needs a break as his or
her attention level is too low.
If the coffee cup lights up in amber, stop in a
safe location and rest for as long as needed.
The amber coffee cup warning will disappear
when the
ENTER
button is pressed or when
the system has determined that the driver is
driving normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the coffee cup will light up in amber
again after approximately 15 minutes,
accompanied by a beep and steering wheel
vibrations.
The warnings do not appear when the
travelling time is 30 minutes or less.
Continued
153
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
■
The Driver Attention Monitor resets when
•
the engine is turned off.
•
the driver unfastens the seat belt and opens the door while the vehicle is stopped.
■
For the Driver Attention Monitor to function
•
the vehicle must be travelling above 40 km/h (25 mph).
•
the electric power steering (EPS) system indicator must be off.
■
Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances.
•
the steering assist function of the Lane Keeping Assist System (LKAS) is active.
2
Lane Keeping Assist System (LKAS)
P. 601
•
the condition of the road is poor, e.g. the surface is unpaved or bumpy.
•
it is windy.
•
the driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.
■
Customizing
You can change the Driver Attention Monitor settings. Select
Tactile And Audible
Alert
,
Tactile Alert Only
/
Tactile Alert
, or
OFF
.
2
P. 157, 408
1
For the Driver Attention Monitor to function
The bars in the Driver Information Interface remain
greyed out unless the Driver Attention Monitor is
functioning.
154
uu
Gauges and Displays
u
Driver Information Interface
In
strum
e
nt Pa
nel
The indicators on the display show the
amount of torque being transferred to the
right front, left front, right rear, and left rear
wheels.
2
Real Time AWD with Intelligent Control
System
■
AWD Torque Distribution Monitor
*
* Not available on all models
155
uu
Gauges and Displays
u
Driver Information Interface
Continued
In
strum
e
nt Pa
nel
Sets the speed alarm on and changes the speed alarm setting.
Each time you press the
/
button, the speed alarm setting changes as follows:
*1:Default Setting
■
Speed Alarm
Speed Alarm 1 On/Off
*1
Speed Alarm 2 On/Off
*1
Speed Alarm 1 Speed Setting [50 km/h (30mph)
*1
]
Speed Alarm 2 Speed Setting [80 km/h (50mph)
*1
]
Exit
uu
Gauges and Displays
u
Driver Information Interface
156
In
strum
e
nt Pa
nel
Shows you turn-by-turn driving directions to your destination linked with the
navigation system.
2
Refer to the Navigation System Manual
Shows the traffic sign recognition system.
2
Traffic Sign Recognition System
Shows the current audio information.
2
P. 331
Shows the current phone information.
2
P. 457
■
Turn-by-Turn Directions
*
■
Traffic Sign Recognition System
■
Audio
*
■
Phone
*
1
The driver information interface shows a compass
when the route guidance is not used.
You can select whether the turn-by-turn display
comes on or not during the route guidance.
2
P. 408
* Not available on all models
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст